clockwerk-opensim-stable – Rev 1

Subversion Repositories:
Rev:
<?xml version="1.0" encoding="utf-8" ?>
<Autotools>
        <ProjectAutogenSh>
                <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                                xmlns:dnpb="http://dnpb.sourceforge.net/schemas/prebuild-1.7.xsd"
                                exclude-result-prefixes="dnpb"
                                >
        <xsl:template match="/"><xsl:text disable-output-escaping="yes">#!/bin/sh
# Run this to generate all the initial makefiles, etc.
# Ripped off from Mono, which ripped off from GNOME macros version

DIE=0

srcdir=`dirname $0`
test -z "$srcdir" &amp;&amp; srcdir=.

if [ -n "$MONO_PATH" ]; then
        # from -> /mono/lib:/another/mono/lib
        # to -> /mono /another/mono
        for i in `echo ${MONO_PATH} | tr ":" " "`; do
                i=`dirname ${i}`
                if [ -n "{i}" -a -d "${i}/share/aclocal" ]; then
                        ACLOCAL_FLAGS="-I ${i}/share/aclocal $ACLOCAL_FLAGS"
                fi
                if [ -n "{i}" -a -d "${i}/bin" ]; then
                        PATH="${i}/bin:$PATH"
                fi
        done
        export PATH
fi

(autoconf --version) &lt; /dev/null > /dev/null 2>&amp;1 || {
  echo
  echo "**Error**: You must have \`autoconf' installed to compile Mono."
  echo "Download the appropriate package for your distribution,"
  echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
  DIE=1
}

if [ -z "$LIBTOOL" ]; then
  LIBTOOL=`which glibtool 2>/dev/null` 
  if [ ! -x "$LIBTOOL" ]; then
    LIBTOOL=`which libtool`
  fi
fi

(grep "^AM_PROG_LIBTOOL" $srcdir/configure.ac >/dev/null) &amp;&amp; {
  ($LIBTOOL --version) &lt; /dev/null > /dev/null 2>&amp;1 || {
    echo
    echo "**Error**: You must have \`libtool' installed to compile Mono."
    echo "Get ftp://ftp.gnu.org/pub/gnu/libtool-1.2d.tar.gz"
    echo "(or a newer version if it is available)"
    DIE=1
  }
}

grep "^AM_GNU_GETTEXT" $srcdir/configure.ac >/dev/null &amp;&amp; {
  grep "sed.*POTFILES" $srcdir/configure.ac >/dev/null || \
  (gettext --version) &lt; /dev/null > /dev/null 2>&amp;1 || {
    echo
    echo "**Error**: You must have \`gettext' installed to compile Mono."
    echo "Get ftp://alpha.gnu.org/gnu/gettext-0.10.35.tar.gz"
    echo "(or a newer version if it is available)"
    DIE=1
  }
}

(automake --version) &lt; /dev/null > /dev/null 2>&amp;1 || {
  echo
  echo "**Error**: You must have \`automake' installed to compile Mono."
  echo "Get ftp://ftp.gnu.org/pub/gnu/automake-1.3.tar.gz"
  echo "(or a newer version if it is available)"
  DIE=1
  NO_AUTOMAKE=yes
}

# if no automake, don't bother testing for aclocal
test -n "$NO_AUTOMAKE" || (aclocal --version) &lt; /dev/null > /dev/null 2>&amp;1 || {
  echo
  echo "**Error**: Missing \`aclocal'.  The version of \`automake'"
  echo "installed doesn't appear recent enough."
  echo "Get ftp://ftp.gnu.org/pub/gnu/automake-1.3.tar.gz"
  echo "(or a newer version if it is available)"
  DIE=1
}

if test "$DIE" -eq 1; then
  exit 1
fi

if test -z "$NOCONFIGURE"; then

if test -z "$*"; then
  echo "**Warning**: I am going to run \`configure' with no arguments."
  echo "If you wish to pass any to it, please specify them on the"
  echo \`$0\'" command line."
  echo
fi

fi

case $CC in
xlc )
  am_opt=--include-deps;;
esac


if grep "^AM_PROG_LIBTOOL" configure.ac >/dev/null; then
  if test -z "$NO_LIBTOOLIZE" ; then 
    echo "Running libtoolize..."
    ${LIBTOOL}ize --force --copy
  fi
fi

echo "Running aclocal $ACLOCAL_FLAGS ..."
aclocal $ACLOCAL_FLAGS || {
  echo
  echo "**Error**: aclocal failed. This may mean that you have not"
  echo "installed all of the packages you need, or you may need to"
  echo "set ACLOCAL_FLAGS to include \"-I \$prefix/share/aclocal\""
  echo "for the prefix where you installed the packages whose"
  echo "macros were not found"
  exit 1
}

if grep "^AM_CONFIG_HEADER" configure.ac >/dev/null; then
  echo "Running autoheader..."
  autoheader || { echo "**Error**: autoheader failed."; exit 1; }
fi

echo "Running automake --gnu $am_opt ..."
automake --add-missing --gnu $am_opt ||
  { echo "**Error**: automake failed."; exit 1; }
echo "Running autoconf ..."
autoconf || { echo "**Error**: autoconf failed."; exit 1; }

conf_flags="--enable-maintainer-mode --enable-compile-warnings" #--enable-iso-c

if test x$NOCONFIGURE = x; then
  echo Running $srcdir/configure $conf_flags "$@" ...
  $srcdir/configure $conf_flags "$@" \
  &amp;&amp; echo Now type \`make\' to compile $PKG_NAME || exit 1
else
  echo Skipping configure process.
fi
</xsl:text>
        </xsl:template>
        </xsl:stylesheet>
        </ProjectAutogenSh>

        <ProjectConfigureAc>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                                xmlns:dnpb="http://dnpb.sourceforge.net/schemas/prebuild-1.7.xsd"
                                exclude-result-prefixes="dnpb"
                                xml:space="preserve"
                                >
        <!-- Removes the xml version header in the generated file -->
        <xsl:output method="text"/>
        <xsl:param name="solutionName" />
        <xsl:param name="projectName" />
        <xsl:param name="projectVersion" />
        <xsl:param name="assemblyName" />
        <xsl:variable name="lcProjectName"><xsl:value-of select="translate($projectName, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz')"/></xsl:variable>
        <xsl:template match="/">
        <xsl:for-each select="//dnpb:Solution[@name=$solutionName]/dnpb:Project[@name=$projectName]"
>AC_INIT([<xsl:value-of select="$projectName" />],[<xsl:value-of select="$projectVersion" />])

AC_PREREQ(2.60)
AC_CANONICAL_SYSTEM
AC_CONFIG_AUX_DIR(.)
AM_INIT_AUTOMAKE([1.9 tar-ustar foreign])
AM_MAINTAINER_MODE
dnl AC_PROG_INTLTOOL([0.25])
AC_PROG_INSTALL

ASSEMBLY_NAME=<xsl:value-of select="$assemblyName" />
PROJECT_NAME=<xsl:value-of select="$projectName" />
PROJECT_VERSION=$VERSION
PROJECT_DESCRIPTION="<xsl:value-of select="dnpb:Description/text()" />"
PROJECT_TYPE="<xsl:value-of select="@type" />"

AC_SUBST(ASSEMBLY_NAME)
AC_SUBST(PROJECT_NAME)
AC_SUBST(PROJECT_VERSION)
AC_SUBST(DESCRIPTION)

AC_MSG_CHECKING([assembly type])
case $PROJECT_TYPE in
        *Exe)
                ASSEMBLY_EXTENSION=exe
                ;;
        *Library)
                ASSEMBLY_EXTENSION=dll
                ;;
        *)
                AC_MSG_ERROR([*** Please add support for project type $PROJECT_TYPE to configure.ac checks!])
                ;;
esac
AC_MSG_RESULT([$PROJECT_TYPE])

AC_SUBST(ASSEMBLY_EXTENSION)

AC_MSG_CHECKING([whether we're compiling from an RCS])
if test -f "$srcdir/.cvs_version" ; then
        from_rcs=cvs
else
  if test -f "$srcdir/.svn/entries" ; then
                from_rcs=svn
  else
        from_rcs=no
  fi
fi

AC_MSG_RESULT($from_rcs)

MONO_REQUIRED_VERSION=1.1
<xsl:text disable-output-escaping="yes">
PKG_CHECK_MODULES(MONO_DEPENDENCY, mono >= $MONO_REQUIRED_VERSION, has_mono=true, has_mono=false)
</xsl:text>
if test "x$has_mono" = "xtrue"; then
  AC_PATH_PROG(RUNTIME, mono, no)
  AC_PATH_PROG(CSC, gmcs, no)
  AC_PATH_PROG(RESGEN, resgen2, no)
  if test `uname -s` = "Darwin"; then
        LIB_PREFIX=
        LIB_SUFFIX=.dylib
  else
        LIB_PREFIX=.so
        LIB_SUFFIX=
  fi
else
  AC_PATH_PROG(CSC, csc.exe, no)
  if test x$CSC = "xno"; then
        AC_MSG_ERROR([You need to install either mono or .Net])
  else
    RUNTIME=
    LIB_PREFIX=
    LIB_SUFFIX=
  fi
fi

AC_PATH_PROG(GACUTIL, gacutil)
if test "x$GACUTIL" = "xno" ; then
        AC_MSG_ERROR([No gacutil tool found])
fi

GACUTIL_FLAGS='/package <xsl:value-of select="$assemblyName" /> /gacdir $(DESTDIR)$(prefix)/lib'
AC_SUBST(GACUTIL_FLAGS)

AC_SUBST(PATH)
AC_SUBST(LD_LIBRARY_PATH)

AC_SUBST(LIB_PREFIX)
AC_SUBST(LIB_SUFFIX)
AC_SUBST(RUNTIME)
AC_SUBST(CSC)
AC_SUBST(RESGEN)
AC_SUBST(GACUTIL)

AC_SUBST(BASE_DEPENDENCIES_CFLAGS)
AC_SUBST(BASE_DEPENDENCIES_LIBS)

dnl Find monodoc
MONODOC_REQUIRED_VERSION=1.0
AC_SUBST(MONODOC_REQUIRED_VERSION)
<xsl:text disable-output-escaping="yes">
PKG_CHECK_MODULES(MONODOC_DEPENDENCY, monodoc >= $MONODOC_REQUIRED_VERSION, enable_monodoc=yes, enable_monodoc=no)
</xsl:text>
if test "x$enable_monodoc" = "xyes"; then
        AC_PATH_PROG(MONODOC, monodoc, no)
        if test x$MONODOC = xno; then
           enable_monodoc=no
        fi
else
        MONODOC=
fi

AC_SUBST(MONODOC)
AM_CONDITIONAL(ENABLE_MONODOC, test "x$enable_monodoc" = "xyes")

winbuild=no
case "$host" in
       *-*-mingw*|*-*-cygwin*)
               winbuild=yes
               ;;
esac
AM_CONDITIONAL(WINBUILD, test x$winbuild = xyes)

<xsl:if test="@type='Exe' or @type='WinExe'">AC_CONFIG_FILES(<xsl:value-of select="$lcProjectName" />)</xsl:if>
<xsl:if test="@type='Library'">AC_CONFIG_FILES(<xsl:value-of select="$projectName" />.pc)</xsl:if>

AC_CONFIG_FILES(Makefile)
AC_OUTPUT

echo "==="
echo ""
echo "Project configuration summary"
echo ""
echo "   * Installation prefix: $prefix"
echo "   * compiler:            $CSC"
echo "   * Documentation:       $enable_monodoc ($MONODOC)"
echo "   * Project Name:        $PROJECT_NAME"
echo "   * Version:             $PROJECT_VERSION"
echo ""
echo "==="

</xsl:for-each>
</xsl:template>
</xsl:stylesheet>
        </ProjectConfigureAc>

        <ProjectMakefileAm>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                                xmlns:dnpb="http://dnpb.sourceforge.net/schemas/prebuild-1.7.xsd"
                                exclude-result-prefixes="dnpb"
                                xml:space="preserve"
                                >
<xsl:param name="projectName" />
<xsl:param name="solutionName" />
<xsl:param name="assemblyName" />
<xsl:variable name="lcProjectName"><xsl:value-of select="translate($projectName, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz')"/></xsl:variable>
<xsl:param name="embeddedFiles" />
<xsl:param name="compiledFiles" />
<xsl:param name="contentFiles" />
<xsl:param name="extraDistFiles" />
<xsl:param name="pkgLibs" />
<xsl:param name="binaryLibs" />
<xsl:param name="systemLibs" />
<xsl:param name="localCopyTargets" />
<xsl:param name="hasAssemblyConfig" />

<xsl:template match="/">
<xsl:for-each select="//dnpb:Solution[@name=$solutionName]/dnpb:Project[@name=$projectName]">
<xsl:variable name="lcType"><xsl:value-of select="translate(@type, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz')" /></xsl:variable>

ASSEMBLY=$(ASSEMBLY_NAME).$(ASSEMBLY_EXTENSION)
<!--
  If the project is an application, create targets for the wrapper script
  -->
<xsl:if test="@type='Exe' or @type='WinExe'">
<xsl:value-of select="$lcProjectName" />dir = $(prefix)/lib/<xsl:value-of select="$lcProjectName" />
<xsl:value-of select="$lcProjectName" />_DATA = $(ASSEMBLY)<xsl:if test="$hasAssemblyConfig='true'"> $(ASSEMBLY).config</xsl:if>

bin_SCRIPTS=<xsl:value-of select="$lcProjectName" />
</xsl:if><xsl:if test="@type='Library'">
pkgconfigdir = $(prefix)/lib/pkgconfig
pkgconfig_DATA = <xsl:value-of select="$projectName" />.pc
<xsl:if test="$hasAssemblyConfig='true'">
<xsl:value-of select="translate($lcProjectName, '.', '_')" />dir = $(prefix)/lib/mono/<xsl:value-of select="$projectName" />
<xsl:value-of select="translate($lcProjectName, '.', '_')" />_DATA = $(ASSEMBLY).config
</xsl:if>
noinst_DATA = $(ASSEMBLY)
</xsl:if>

PACKAGES =<xsl:value-of select="$pkgLibs" />
BINARY_LIBS =<xsl:value-of select="$binaryLibs" />
SYSTEM_LIBS =<xsl:value-of select="$systemLibs" />
RESOURCES_SRC =<xsl:value-of select="$embeddedFiles" />
RESOURCES = $(RESOURCES_SRC:.resx=.resources)
SOURCES =<xsl:value-of select="$compiledFiles" />

EXTRA_DIST=$(SOURCES) $(BINARY_LIBS) $(RESOURCES_SRC) install-sh missing <xsl:value-of select="$extraDistFiles" />

CLEANFILES=$(ASSEMBLY)

<xsl:value-of select="$localCopyTargets" />

<xsl:for-each select="//dnpb:Solution[@name=$solutionName]/dnpb:Project[@name=$projectName]/dnpb:Configuration">
<xsl:variable name="outputPath"><xsl:value-of select="dnpb:Options/dnpb:OutputPath/text()" /></xsl:variable>
<xsl:variable name="keyFile"><xsl:value-of select="dnpb:Options/dnpb:KeyFile/text()" /></xsl:variable>
<xsl:variable name="docFile"><xsl:value-of select="dnpb:Options/dnpb:XmlDocFile/text()" /></xsl:variable>
<xsl:value-of select="$outputPath"/>/$(ASSEMBLY): $(srcdir)/$(ASSEMBLY).response $(RESOURCES) $(SOURCES) $(BINARY_LIBS) <xsl:call-template name="substring-after-last-mod"><xsl:with-param name="input" select="$keyFile" /><xsl:with-param name="substr" select="'/'" /></xsl:call-template>
        <xsl:if test="$docFile!=''">mkdir -p doc <xsl:text disable-output-escaping="yes">&amp;&amp;</xsl:text> </xsl:if>mkdir -p <xsl:value-of select="$outputPath" /> <xsl:text disable-output-escaping="yes">&amp;&amp;</xsl:text> $(CSC) /out:$@ \
                /target:<xsl:value-of select="$lcType" /> \<xsl:if test="$embeddedFiles!=''">
                $(addprefix /resource:$(srcdir)/, $(RESOURCES)) \</xsl:if><xsl:if test="$pkgLibs!=''">
                $(addprefix /pkg:, $(PACKAGES)) \</xsl:if><xsl:if test="$systemLibs!=''">
                $(addprefix /r:, $(SYSTEM_LIBS)) \</xsl:if><xsl:if test="$binaryLibs!=''">
                $(addprefix /r:$(srcdir)/, $(BINARY_LIBS)) \</xsl:if>
                @$(srcdir)/$(ASSEMBLY).response \<xsl:if test="$docFile!=''">
                /doc:doc/<xsl:value-of select="$docFile" /> \</xsl:if><xsl:if test="$keyFile!=''">
                /keyfile:$(srcdir)/<xsl:call-template name="substring-after-last-mod"><xsl:with-param name="input" select="$keyFile" /><xsl:with-param name="substr" select="'/'" /></xsl:call-template> \</xsl:if><xsl:if test="dnpb:Options/dnpb:AllowUnsafe/text()='true'">
                /unsafe \</xsl:if><xsl:text disable-output-escaping="yes">
        &amp;&amp; rm -f $(ASSEMBLY) \
        &amp;&amp; ln $@ $(ASSEMBLY)</xsl:text>
        
CLEANFILES+=<xsl:value-of select="$outputPath"/>/$(ASSEMBLY)

<!-- if this project config has a KeyFile -->
<xsl:if test="$keyFile!=''">EXTRA_DIST+=<xsl:call-template name="substring-after-last-mod"><xsl:with-param name="input" select="$keyFile" /><xsl:with-param name="substr" select="'/'" /></xsl:call-template></xsl:if>

<xsl:value-of select="@name" />: <xsl:value-of select="$outputPath"/>/$(ASSEMBLY)<xsl:text disable-output-escaping="yes">
        rm -f $(ASSEMBLY) \
        &amp;&amp;</xsl:text> ln <xsl:value-of select="$outputPath"/>/$(ASSEMBLY) $(ASSEMBLY)
<!-- If the project is a library, create library-specific targets -->
<xsl:if test="//dnpb:Solution[@name=$solutionName]/dnpb:Project[@name=$projectName]/@type='Library'">
<xsl:choose>
<!--
  If the project has a keyfile, make a gac install/uninstall target
  -->
  <xsl:when test="dnpb:Options/dnpb:KeyFile/text()!=''">
<xsl:value-of select="@name" />_install-data-local: <xsl:value-of select="$outputPath"/>/$(ASSEMBLY)
        echo "$(GACUTIL) /i $(ASSEMBLY) /f $(GACUTIL_FLAGS)";  \
        $(GACUTIL) /i $(ASSEMBLY) /f $(GACUTIL_FLAGS) || exit 1;

<xsl:value-of select="@name" />_uninstall-local:
        if [`gacutil -l <xsl:value-of select="$projectName" /> | grep "Number" | awk -F= '{print $$2}'` -gt "0" ] ; \
        then \
                echo "$(GACUTIL) /u $(ASSEMBLY_NAME) $(GACUTIL_FLAGS)"; \
                $(GACUTIL) /u $(ASSEMBLY_NAME) $(GACUTIL_FLAGS) || exit 1; \
        fi
  </xsl:when>
<!--
   If there is no keyfile for the project, define a filesystem
   install target
  -->
  <xsl:otherwise>
noinst_<xsl:value-of select="@name" />_<xsl:value-of select="translate($lcProjectName, '.', '_')" />dir = $(prefix)/lib/mono/<xsl:value-of select="$projectName" />
noinst_<xsl:value-of select="@name" />_<xsl:value-of select="translate($lcProjectName, '.', '_')" />_DATA = <xsl:value-of select="$outputPath"/>/$(ASSEMBLY)
  </xsl:otherwise>
</xsl:choose>
</xsl:if>
</xsl:for-each>

<xsl:variable name="defaultConfig"><xsl:value-of select="//dnpb:Solution[@name=$solutionName]/dnpb:Project[@name=$projectName]/dnpb:Configuration/@name" /></xsl:variable>
$(ASSEMBLY): <xsl:value-of select="$defaultConfig" />

<xsl:text disable-output-escaping="yes">
$(srcdir)/$(ASSEMBLY).response: $(srcdir)/Makefile
        echo "$(addprefix $(srcdir)/, $(SOURCES))" &gt; $@
</xsl:text>

all: $(ASSEMBLY)

# rule to compile .resx files to .resources
%.resources: %.resx
        $(RESGEN) /useSourcePath /compile $(@:.resources=.resx)

<xsl:if test="@type='Library'">
<!-- if the default config has a KeyFile -->
<xsl:choose>
  <xsl:when test="//dnpb:Solution[@name=$solutionName]/dnpb:Project[@name=$projectName]/dnpb:Configuration[@name=$defaultConfig]/dnpb:Options/dnpb:KeyFile/text()!=''">
install-data-local: <xsl:value-of select="$defaultConfig" />_install-data-local

uninstall-local: <xsl:value-of select="$defaultConfig" />_uninstall-local
  </xsl:when>
<!--
  If the default config does not have a KeyFile, don't really do
  anything
  -->
  <xsl:otherwise>
#<xsl:value-of select="translate($lcProjectName, '.', '_')" />dir+=$(noinst_<xsl:value-of select="$defaultConfig" />_<xsl:value-of select="translate($lcProjectName, '.', '_')" />dir)
#<xsl:value-of select="translate($lcProjectName, '.', '_')" />_DATA+=$(noinst_<xsl:value-of select="$defaultConfig" />_<xsl:value-of select="translate($lcProjectName, '.', '_')" />_DATA)
  </xsl:otherwise>
</xsl:choose>
</xsl:if>
</xsl:for-each>
</xsl:template>

<xsl:template name="substring-after-last" xml:space="default">
        <xsl:param name="input" />
        <xsl:param name="substr" />
    
        <!-- Extract the string which comes after the first occurence -->
        <xsl:variable name="temp" select="substring-after($input,$substr)" />
    
    <xsl:choose>
                <!-- If it still contains the search string then recursively process -->
                <xsl:when test="$substr and contains($temp,$substr)">
                        <xsl:call-template name="substring-after-last">
                                <xsl:with-param name="input" select="$temp" />
                                <xsl:with-param name="substr" select="$substr" />
                        </xsl:call-template>
                </xsl:when>
                <xsl:otherwise>
                        <xsl:value-of select="$temp" />
                </xsl:otherwise>
        </xsl:choose>
</xsl:template>

<xsl:template name="substring-after-last-mod" xml:space="default">
        <xsl:param name="input" />
        <xsl:param name="substr" />

        <xsl:choose>
                <xsl:when test="contains($input,$substr)">
                        <xsl:call-template name="substring-after-last">
                                <xsl:with-param name="input"  select="$input" />
                                <xsl:with-param name="substr" select="$substr" />
                        </xsl:call-template>
                </xsl:when>
                <xsl:otherwise>
                        <xsl:value-of select="$input" />
                </xsl:otherwise>
        </xsl:choose>
</xsl:template>
</xsl:stylesheet>
        </ProjectMakefileAm>
        
        <ProjectPcIn>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                                xmlns:dnpb="http://dnpb.sourceforge.net/schemas/prebuild-1.7.xsd"
                                exclude-result-prefixes="dnpb"
                                xml:space="preserve"
                                >
        <!-- Removes the xml version header in the generated file -->
        <xsl:output method="text"/>
        <xsl:param name="projectName" />
        <xsl:param name="solutionName" />
        <xsl:variable name="lcProjectName"><xsl:value-of select="translate($projectName, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz')"/></xsl:variable>
<xsl:template match="/"><xsl:for-each select="//dnpb:Solution[@name=$solutionName]/dnpb:Project[@name=$projectName]">prefix=@prefix@
exec_prefix=${prefix}
libdir=${exec_prefix}/lib/mono/@PROJECT_NAME@

Name: <xsl:value-of select="@name" />
Description: <xsl:value-of select="Description/text()" />
Version: @PROJECT_VERSION@
Requires:<xsl:for-each select="Reference"><xsl:if test="@localCopy=false"><xsl:text disable-output-escaping="yes"> </xsl:text><xsl:value-of select="@name" /></xsl:if></xsl:for-each>
Libs: -r:${libdir}/@PROJECT_NAME@.dll

</xsl:for-each> 

        </xsl:template>
</xsl:stylesheet>
        </ProjectPcIn>
        
        <SolutionAutogenSh>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                                xmlns:dnpb="http://dnpb.sourceforge.net/schemas/prebuild-1.7.xsd"
                                exclude-result-prefixes="dnpb"
                                >
        <xsl:param name="solutionName" />
        <xsl:template match="/"><xsl:text disable-output-escaping="yes">#!/bin/sh
# Run this to generate all the initial makefiles, etc.
# Ripped off from Mono, which ripped off from GNOME macros version

DIE=0

srcdir=`dirname $0`
test -z "$srcdir" &amp;&amp; srcdir=.

if [ -n "$MONO_PATH" ]; then
        # from -> /mono/lib:/another/mono/lib
        # to -> /mono /another/mono
        for i in `echo ${MONO_PATH} | tr ":" " "`; do
                i=`dirname ${i}`
                if [ -n "{i}" -a -d "${i}/share/aclocal" ]; then
                        ACLOCAL_FLAGS="-I ${i}/share/aclocal $ACLOCAL_FLAGS"
                fi
                if [ -n "{i}" -a -d "${i}/bin" ]; then
                        PATH="${i}/bin:$PATH"
                fi
        done
        export PATH
fi

(autoconf --version) &lt; /dev/null > /dev/null 2>&amp;1 || {
  echo
  echo "**Error**: You must have \`autoconf' installed to compile Mono."
  echo "Download the appropriate package for your distribution,"
  echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
  DIE=1
}

if [ -z "$LIBTOOL" ]; then
  LIBTOOL=`which glibtool 2>/dev/null` 
  if [ ! -x "$LIBTOOL" ]; then
    LIBTOOL=`which libtool`
  fi
fi

(grep "^AM_PROG_LIBTOOL" $srcdir/configure.ac >/dev/null) &amp;&amp; {
  ($LIBTOOL --version) &lt; /dev/null > /dev/null 2>&amp;1 || {
    echo
    echo "**Error**: You must have \`libtool' installed to compile Mono."
    echo "Get ftp://ftp.gnu.org/pub/gnu/libtool-1.2d.tar.gz"
    echo "(or a newer version if it is available)"
    DIE=1
  }
}

grep "^AM_GNU_GETTEXT" $srcdir/configure.ac >/dev/null &amp;&amp; {
  grep "sed.*POTFILES" $srcdir/configure.ac >/dev/null || \
  (gettext --version) &lt; /dev/null > /dev/null 2>&amp;1 || {
    echo
    echo "**Error**: You must have \`gettext' installed to compile Mono."
    echo "Get ftp://alpha.gnu.org/gnu/gettext-0.10.35.tar.gz"
    echo "(or a newer version if it is available)"
    DIE=1
  }
}

(automake --version) &lt; /dev/null > /dev/null 2>&amp;1 || {
  echo
  echo "**Error**: You must have \`automake' installed to compile Mono."
  echo "Get ftp://ftp.gnu.org/pub/gnu/automake-1.3.tar.gz"
  echo "(or a newer version if it is available)"
  DIE=1
  NO_AUTOMAKE=yes
}


# if no automake, don't bother testing for aclocal
test -n "$NO_AUTOMAKE" || (aclocal --version) &lt; /dev/null > /dev/null 2>&amp;1 || {
  echo
  echo "**Error**: Missing \`aclocal'.  The version of \`automake'"
  echo "installed doesn't appear recent enough."
  echo "Get ftp://ftp.gnu.org/pub/gnu/automake-1.3.tar.gz"
  echo "(or a newer version if it is available)"
  DIE=1
}

if test "$DIE" -eq 1; then
  exit 1
fi

if test -z "$*"; then
  echo "**Warning**: I am going to run \`configure' with no arguments."
  echo "If you wish to pass any to it, please specify them on the"
  echo \`$0\'" command line."
  echo
fi

case $CC in
xlc )
  am_opt=--include-deps;;
esac


if grep "^AM_PROG_LIBTOOL" configure.ac >/dev/null; then
  if test -z "$NO_LIBTOOLIZE" ; then 
    echo "Running libtoolize..."
    ${LIBTOOL}ize --force --copy
  fi
fi

echo "Running aclocal $ACLOCAL_FLAGS ..."
aclocal $ACLOCAL_FLAGS || {
  echo
  echo "**Error**: aclocal failed. This may mean that you have not"
  echo "installed all of the packages you need, or you may need to"
  echo "set ACLOCAL_FLAGS to include \"-I \$prefix/share/aclocal\""
  echo "for the prefix where you installed the packages whose"
  echo "macros were not found"
  exit 1
}

if grep "^AM_CONFIG_HEADER" configure.ac >/dev/null; then
  echo "Running autoheader..."
  autoheader || { echo "**Error**: autoheader failed."; exit 1; }
fi

echo "Running automake --gnu $am_opt ..."
automake --add-missing --gnu $am_opt ||
  { echo "**Error**: automake failed."; exit 1; }
echo "Running autoconf ..."
autoconf || { echo "**Error**: autoconf failed."; exit 1; }
</xsl:text>
<xsl:for-each select="/dnpb:Prebuild/dnpb:Solution[@name=$solutionName]/dnpb:Project">
echo Running <xsl:value-of select="@name" />/autogen.sh ...
(cd $srcdir/<xsl:value-of select="@name" /> ; NOCONFIGURE=1  /bin/sh ./autogen.sh "$@")
echo Done running <xsl:value-of select="@name" />/autogen.sh ...
</xsl:for-each>
<xsl:text disable-output-escaping="yes">
conf_flags="--enable-maintainer-mode --enable-compile-warnings" #--enable-iso-c

if test x$NOCONFIGURE = x; then
  echo Running $srcdir/configure $conf_flags "$@" ...
  $srcdir/configure $conf_flags "$@" \
  &amp;&amp; echo Now type \`make\' to compile $PKG_NAME || exit 1
else
  echo Skipping configure process.
fi
</xsl:text>
</xsl:template>
</xsl:stylesheet>       
        </SolutionAutogenSh>
        
        <SolutionConfigureAc>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                                xmlns:dnpb="http://dnpb.sourceforge.net/schemas/prebuild-1.7.xsd"
                                exclude-result-prefixes="dnpb"
                                xml:space="preserve"
                                >
        <!-- Removes the xml version header in the generated file -->
        <xsl:output method="text"/>
        <xsl:param name="solutionName" />
<xsl:template match="/"
>AC_INIT([<xsl:value-of select="$solutionName" />]-solution,[<xsl:value-of select="/dnpb:Prebuild/dnpb:Solution[@name=$solutionName]/@version" />])
AC_CONFIG_AUX_DIR(.)
AM_INIT_AUTOMAKE([1.9 tar-ustar foreign])
EXTRA_DIST="install-sh missing"
SOLUTION_NAME=<xsl:value-of select="$solutionName" />
SOLUTION_VERSION=$VERSION
SOLUTION_DESCRIPTION="<xsl:value-of select="/dnpb:Prebuild/dnpb:Solution[@name=$solutionName]/dnpb:Description" />"
AC_SUBST(DESCRIPTION)

AM_MAINTAINER_MODE

dnl AC_PROG_INTLTOOL([0.25])

AC_PROG_INSTALL

AC_MSG_CHECKING([whether we're building from an RCS])
if test -f "$srcdir/.cvs_version" ; then
        from_rcs=cvs
else
  if test -f "$srcdir/.svn/entries" ; then
                from_rcs=svn
  else
        from_rcs=no
  fi
fi

AC_MSG_RESULT($from_rcs)

CONFIG="Release"
AC_SUBST(CONFIG)
<!-- TODO: Ensure that these SUBDIRS are processed in dependency order -->
AC_CONFIG_SUBDIRS(<xsl:for-each select="/dnpb:Prebuild/dnpb:Solution[@name=$solutionName]/dnpb:Project"><xsl:text disable-output-escaping="yes"> </xsl:text><xsl:value-of select="@name" />
</xsl:for-each>)
<xsl:text disable-output-escaping="yes">

AC_OUTPUT([
Makefile
])

echo "==="
echo ""
echo "Solution configuration summary"
echo ""
echo "   * Solution Name:       $SOLUTION_NAME"
echo "   * Version:       $SOLUTION_VERSION"
echo "   * Packages:"</xsl:text>
<xsl:for-each select="/dnpb:Prebuild/dnpb:Solution[@name=$solutionName]/dnpb:Project">echo "    - <xsl:value-of select="@name" />"
</xsl:for-each><xsl:text disable-output-escaping="yes">echo ""
echo "==="
</xsl:text>
</xsl:template>
</xsl:stylesheet>
        </SolutionConfigureAc>
        
        <SolutionMakefileAm>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                                xmlns:dnpb="http://dnpb.sourceforge.net/schemas/prebuild-1.7.xsd"
                                exclude-result-prefixes="dnpb"
                                xml:space="preserve"
                                >
        <xsl:param name="solutionName" />
        <xsl:template match="/">SUBDIRS =<xsl:for-each select="//dnpb:Solution[@name=$solutionName]/dnpb:Project"><xsl:text disable-output-escaping="yes"> </xsl:text><xsl:value-of select="@name" /></xsl:for-each>
</xsl:template>
</xsl:stylesheet>
        </SolutionMakefileAm>
        <ProjectWrapperScriptIn>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                                xmlns:dnpb="http://dnpb.sourceforge.net/schemas/prebuild-1.7.xsd"
                                exclude-result-prefixes="dnpb"
                                xml:space="preserve"
                                >
        <!-- Removes the xml version header in the generated file -->
        <xsl:output method="text"/>
        <xsl:param name="projectName" />
        <xsl:param name="assemblyName" />
        <xsl:param name="solutionName" />
        <xsl:param name="monoPath" />
        <xsl:variable name="lcProjectName"><xsl:value-of select="translate($projectName, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz')"/></xsl:variable>
<xsl:template match="/"><xsl:for-each select="//dnpb:Solution[@name=$solutionName]/dnpb:Project[@name=$projectName]">#! /bin/sh

PACKAGE=<xsl:value-of select="$assemblyName" />
prefix=@prefix@
exec_prefix=@exec_prefix@

# %%$@%$# why oh why isn't it $sharedir/<xsl:value-of select="$lcProjectName" />
# Day changed to 30 Mar 2007
# ...
# 07:50 &lt; cj> why are we installing .exe assemblies to $prefix/lib/$package/ and 
#             not $prefix/share/$package ?
# 07:50 &lt; jonp> momentum.
# 07:50 &lt; jonp> and it's hard to say that a .exe isn't platform specific
# 07:50 &lt; jonp> as it can still contain DllImport's which make platform 
#               assumptions

packagedir=$prefix/lib/<xsl:value-of select="$lcProjectName" />
export MONO_PATH=$MONO_PATH<xsl:value-of select="$monoPath" /> 

exec @RUNTIME@ $packagedir/$PACKAGE.exe "$@"
</xsl:for-each>
</xsl:template>
</xsl:stylesheet>
        </ProjectWrapperScriptIn>
</Autotools>