OpenWrt – Rev 1

Subversion Repositories:
Rev:
/*   This program is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU General Public License as published by
 *   the Free Software Foundation; version 2 of the License
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU General Public License for more details.
 *
 *   Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
 *   Copyright (C) 2009-2015 Felix Fietkau <nbd@nbd.name>
 *   Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
 */

#include <linux/module.h>

#include <asm/mach-ralink/ralink_regs.h>

#include "mtk_eth_soc.h"
#include "mdio_rt2880.h"

#define RT3883_RSTCTRL_FE               BIT(21)

static void rt3883_fe_reset(void)
{
        fe_reset(RT3883_RSTCTRL_FE);
}

static int rt3883_fwd_config(struct fe_priv *priv)
{
        int ret;

        ret = fe_set_clock_cycle(priv);
        if (ret)
                return ret;

        fe_fwd_config(priv);
        fe_w32(FE_PSE_FQFC_CFG_256Q, FE_PSE_FQ_CFG);
        fe_csum_config(priv);

        return ret;
}

static void rt3883_init_data(struct fe_soc_data *data,
                             struct net_device *netdev)
{
        struct fe_priv *priv = netdev_priv(netdev);

        priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_PADDING_BUG |
                FE_FLAG_JUMBO_FRAME | FE_FLAG_CALIBRATE_CLK;
        netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
                NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX;
}

static struct fe_soc_data rt3883_data = {
        .init_data = rt3883_init_data,
        .reset_fe = rt3883_fe_reset,
        .fwd_config = rt3883_fwd_config,
        .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
        .rx_int = FE_RX_DONE_INT,
        .tx_int = FE_TX_DONE_INT,
        .status_int = FE_CNT_GDM_AF,
        .checksum_bit = RX_DMA_L4VALID,
        .mdio_read = rt2880_mdio_read,
        .mdio_write = rt2880_mdio_write,
        .mdio_adjust_link = rt2880_mdio_link_adjust,
        .port_init = rt2880_port_init,
};

const struct of_device_id of_fe_match[] = {
        { .compatible = "ralink,rt3883-eth", .data = &rt3883_data },
        {},
};

MODULE_DEVICE_TABLE(of, of_fe_match);