OpenWrt – Rev 1

?pathlinks?

Blame – Last modification – View Log – Download

/dts-v1/;

#include "mt7628an.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "buffalo,wcr-1166ds", "mediatek,mt7628an-soc";
        model = "Buffalo WCR-1166DS";

        aliases {
                led-boot = &led_power;
                led-failsafe = &led_power;
                led-running = &led_power;
                led-upgrade = &led_power;
        };

        keys {
                compatible = "gpio-keys-polled";
                poll-interval = <20>;

                aoss {
                        label = "aoss";
                        gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WPS_BUTTON>;
                };

                ap {
                        label = "ap";
                        gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_0>;
                        linux,input-type = <EV_SW>;
                };

                reset {
                        label = "reset";
                        gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };

        leds {
                compatible = "gpio-leds";

                router_o {
                        label = "wcr-1166ds:orange:router";
                        gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
                };

                router_g {
                        label = "wcr-1166ds:green:router";
                        gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
                };

                internet_o {
                        label = "wcr-1166ds:orange:internet";
                        gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
                };

                internet_g {
                        label = "wcr-1166ds:green:internet";
                        gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
                };

                wireless_o {
                        label = "wcr-1166ds:orange:wireless";
                        gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
                };

                wireless_g {
                        label = "wcr-1166ds:green:wireless";
                        gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
                };

                diag {
                        label = "wcr-1166ds:orange:diag";
                        gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
                };

                led_power: power {
                        label = "wcr-1166ds:green:power";
                        gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
                };
        };
};

&ehci {
        status = "disabled";
};

&esw {
        mediatek,portmap = <0x2f>;
        mediatek,portdisable = <0x27>;
};

&ohci {
        status = "disabled";
};

&pcie {
        status = "okay";
};

&pcie0 {
        mt76@0,0 {
                reg = <0x0000 0 0 0 0>;
                mediatek,mtd-eeprom = <&factory 0x8000>;
                ieee80211-freq-limit = <5000000 6000000>;
        };
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "uart1", "wled_an", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt", "refclk", "gpio", "i2s";
                        ralink,function = "gpio";
                };
        };
};

&spi0 {
        status = "okay";

        m25p80@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "u-boot";
                                reg = <0x0 0x30000>;
                                read-only;
                        };

                        partition@30000 {
                                label = "u-boot-env";
                                reg = <0x30000 0x10000>;
                                read-only;
                        };

                        factory: partition@40000 {
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
                        };

                        partition@50000 {
                                compatible = "openwrt,trx";
                                label = "firmware";
                                reg = <0x50000 0x7c0000>;
                        };

                        partition@810000 {
                                label = "firmware2";
                                reg = <0x810000 0x7c0000>;
                        };

                        partition@fd0000 {
                                label = "glbcfg";
                                reg = <0xfd0000 0x10000>;
                                read-only;
                        };

                        partition@fe0000 {
                                label = "board_data";
                                reg = <0xfe0000 0x10000>;
                                read-only;
                        };
                };
        };
};

&wmac {
        status = "okay";
};