OpenWrt – Rev 1

Subversion Repositories:
Rev:
/dts-v1/;

#include "mt7620a.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
        model = "Ralink MT7620a + MT7610e evaluation board";

        keys {
                compatible = "gpio-keys";
                poll-interval = <20>;

                s2 {
                        label = "S2";
                        gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_0>;
                };

                s3 {
                        label = "S3";
                        gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_1>;
                };
        };
};

&spi0 {
        status = "okay";

        m25p80@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "u-boot";
                                reg = <0x0 0x30000>;
                                read-only;
                        };

                        partition@30000 {
                                label = "u-boot-env";
                                reg = <0x30000 0x10000>;
                                read-only;
                        };

                        factory: partition@40000 {
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
                        };

                        partition@50000 {
                                compatible = "denx,uimage";
                                label = "firmware";
                                reg = <0x50000 0x7b0000>;
                        };
                };
        };
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "i2c", "uartf";
                        ralink,function = "gpio";
                };
        };
};

&ethernet {
        status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
        mediatek,portmap = "llllw";

        port@4 {
                status = "okay";
                phy-mode = "rgmii";
                phy-handle = <&phy4>;
        };

        port@5 {
                status = "okay";
                phy-mode = "rgmii";
                phy-handle = <&phy5>;
        };

        mdio-bus {
                status = "okay";

                phy4: ethernet-phy@4 {
                        reg = <4>;
                        phy-mode = "rgmii";
                };

                phy5: ethernet-phy@5 {
                        reg = <5>;
                        phy-mode = "rgmii";
                };
        };
};

&gsw {
        mediatek,port4 = "gmac";
};

&sdhci {
        status = "okay";
};

&pcie {
        status = "okay";
};

&ehci {
        status = "okay";
};

&ohci {
        status = "okay";
};