OpenWrt – Rev 1

Subversion Repositories:
Rev:
/dts-v1/;

#include "mt7621.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "dlink,dir-860l-b1", "mediatek,mt7621-soc";
        model = "D-Link DIR-860L B1";

        aliases {
                led-boot = &led_power_green;
                led-failsafe = &led_power_green;
                led-running = &led_power_green;
                led-upgrade = &led_power_green;
        };

        memory@0 {
                device_type = "memory";
                reg = <0x0 0x8000000>;
        };

        chosen {
                bootargs = "console=ttyS0,57600";
        };

        leds {
                compatible = "gpio-leds";

                power {
                        label = "dir-860l-b1:orange:power";
                        gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };

                led_power_green: power2 {
                        label = "dir-860l-b1:green:power";
                        gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
                };

                net {
                        label = "dir-860l-b1:orange:net";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };

                net2 {
                        label = "dir-860l-b1:green:net";
                        gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
                };
        };

        keys {
                compatible = "gpio-keys-polled";
                poll-interval = <20>;

                reset {
                        label = "reset";
                        gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };

                wps {
                        label = "wps";
                        gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };
};

&spi0 {
        status = "okay";

        m25p80@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "u-boot";
                                reg = <0x0 0x30000>;
                                read-only;
                        };

                        partition@30000 {
                                label = "u-boot-env";
                                reg = <0x30000 0x4000>;
                                read-only;
                        };

                        radio: partition@34000 {
                                label = "radio";
                                reg = <0x34000 0x4000>;
                                read-only;
                        };

                        factory: partition@38000 {
                                label = "factory";
                                reg = <0x38000 0x8000>;
                                read-only;
                        };

                        partition@40000 {
                                label = "defaults";
                                reg = <0x40000 0x10000>;
                                read-only;
                        };

                        partition@50000 {
                                compatible = "seama";
                                label = "firmware";
                                reg = <0x50000 0xfb0000>;
                        };
                };
        };
};

&pcie {
        status = "okay";
};

&pcie0 {
        mt76@0,0 {
                reg = <0x0000 0 0 0 0>;
                mediatek,mtd-eeprom = <&radio 0x2000>;
                ieee80211-freq-limit = <5000000 6000000>;
        };
};

&pcie1 {
        mt76@0,0 {
                reg = <0x0000 0 0 0 0>;
                mediatek,mtd-eeprom = <&radio 0>;
                ieee80211-freq-limit = <2400000 2500000>;
        };
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
                        ralink,function = "gpio";
                };
        };
};