OpenWrt – Rev 1
?pathlinks?
From 13a1b2e927893cbb046a1ec5a55ec3516873a3f6 Mon Sep 17 00:00:00 2001
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
Date: Fri, 13 Oct 2017 16:26:36 +0800
Subject: [PATCH 129/224] usb: xhci-mtk: support option to disable usb3 ports
Add support to disable specific usb3 ports, it's useful when
usb3 phy is shared with PCIe or SATA, because we should disable
the corresponding usb3 port if the phy is used by PCIe or SATA.
Sometimes it's helpful to analyse and solve problems.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci-mtk.c | 18 +++++++++++++++---
drivers/usb/host/xhci-mtk.h | 1 +
2 files changed, 16 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -92,6 +92,7 @@ static int xhci_mtk_host_enable(struct x
{
struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
u32 value, check_val;
+ int u3_ports_disabed = 0;
int ret;
int i;
@@ -103,8 +104,13 @@ static int xhci_mtk_host_enable(struct x
value &= ~CTRL1_IP_HOST_PDN;
writel(value, &ippc->ip_pw_ctr1);
- /* power on and enable all u3 ports */
+ /* power on and enable u3 ports except skipped ones */
for (i = 0; i < mtk->num_u3_ports; i++) {
+ if ((0x1 << i) & mtk->u3p_dis_msk) {
+ u3_ports_disabed++;
+ continue;
+ }
+
value = readl(&ippc->u3_ctrl_p[i]);
value &= ~(CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS);
value |= CTRL_U3_PORT_HOST_SEL;
@@ -126,7 +132,7 @@ static int xhci_mtk_host_enable(struct x
check_val = STS1_SYSPLL_STABLE | STS1_REF_RST |
STS1_SYS125_RST | STS1_XHCI_RST;
- if (mtk->num_u3_ports)
+ if (mtk->num_u3_ports > u3_ports_disabed)
check_val |= STS1_U3_MAC_RST;
ret = readl_poll_timeout(&ippc->ip_pw_sts1, value,
@@ -149,8 +155,11 @@ static int xhci_mtk_host_disable(struct
if (!mtk->has_ippc)
return 0;
- /* power down all u3 ports */
+ /* power down u3 ports except skipped ones */
for (i = 0; i < mtk->num_u3_ports; i++) {
+ if ((0x1 << i) & mtk->u3p_dis_msk)
+ continue;
+
value = readl(&ippc->u3_ctrl_p[i]);
value |= CTRL_U3_PORT_PDN;
writel(value, &ippc->u3_ctrl_p[i]);
@@ -573,6 +582,9 @@ static int xhci_mtk_probe(struct platfor
}
mtk->lpm_support = of_property_read_bool(node, "usb3-lpm-capable");
+ /* optional property, ignore the error if it does not exist */
+ of_property_read_u32(node, "mediatek,u3p-dis-msk",
+ &mtk->u3p_dis_msk);
ret = usb_wakeup_of_property_parse(mtk, node);
if (ret)
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -121,6 +121,7 @@ struct xhci_hcd_mtk {
bool has_ippc;
int num_u2_ports;
int num_u3_ports;
+ int u3p_dis_msk;
struct regulator *vusb33;
struct regulator *vbus;
struct clk *sys_clk; /* sys and mac clock */