OpenWrt – Rev 1
?pathlinks?
From 0bafdb711c1a61fbe5bb5b4d4bb5e32425d95a72 Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Fri, 16 Nov 2018 15:36:03 +0800
Subject: [PATCH] config: support layerscape
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This is an integrated patch of config for layerscape
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
drivers/irqchip/Makefile | 1 +
drivers/net/ethernet/freescale/Kconfig | 14 ++++----
drivers/net/ethernet/freescale/Makefile | 3 ++
drivers/ptp/Kconfig | 29 +++++++++++++++++
drivers/soc/Kconfig | 1 +
drivers/soc/fsl/Kconfig | 11 +++++++
drivers/soc/fsl/Kconfig.arm | 16 +++++++++
drivers/soc/fsl/Makefile | 3 ++
drivers/soc/fsl/layerscape/Kconfig | 10 ++++++
drivers/soc/fsl/layerscape/Makefile | 1 +
drivers/staging/Kconfig | 4 +++
drivers/staging/Makefile | 2 ++
drivers/staging/fsl-dpaa2/Kconfig | 43 ++++++++++++++++++++++++-
drivers/staging/fsl-dpaa2/Makefile | 4 +++
14 files changed, 135 insertions(+), 7 deletions(-)
create mode 100644 drivers/soc/fsl/Kconfig.arm
create mode 100644 drivers/soc/fsl/layerscape/Kconfig
create mode 100644 drivers/soc/fsl/layerscape/Makefile
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -80,3 +80,4 @@ obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed
obj-$(CONFIG_STM32_EXTI) += irq-stm32-exti.o
obj-$(CONFIG_QCOM_IRQ_COMBINER) += qcom-irq-combiner.o
obj-$(CONFIG_IRQ_UNIPHIER_AIDET) += irq-uniphier-aidet.o
+obj-$(CONFIG_QUICC_ENGINE) += irq-qeic.o
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -5,10 +5,11 @@
config NET_VENDOR_FREESCALE
bool "Freescale devices"
default y
- depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
- M523x || M527x || M5272 || M528x || M520x || M532x || \
- ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM) || \
- ARCH_LAYERSCAPE || COMPILE_TEST
+ depends on FSL_SOC || (QUICC_ENGINE && PPC32) || CPM1 || CPM2 || \
+ PPC_MPC512x || M523x || M527x || M5272 || M528x || M520x || \
+ M532x || ARCH_MXC || ARCH_MXS || \
+ (PPC_MPC52xx && PPC_BESTCOMM) || ARCH_LAYERSCAPE || \
+ COMPILE_TEST
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
@@ -73,7 +74,7 @@ config FSL_XGMAC_MDIO
config UCC_GETH
tristate "Freescale QE Gigabit Ethernet"
- depends on QUICC_ENGINE
+ depends on QUICC_ENGINE && FSL_SOC && PPC32
select FSL_PQ_MDIO
select PHYLIB
---help---
@@ -94,7 +95,8 @@ config GIANFAR
This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
and MPC86xx family of chips, the eTSEC on LS1021A and the FEC
on the 8540.
-
+source "drivers/net/ethernet/freescale/sdk_fman/Kconfig"
+source "drivers/net/ethernet/freescale/sdk_dpaa/Kconfig"
source "drivers/net/ethernet/freescale/dpaa/Kconfig"
endif # NET_VENDOR_FREESCALE
--- a/drivers/net/ethernet/freescale/Makefile
+++ b/drivers/net/ethernet/freescale/Makefile
@@ -20,5 +20,8 @@ gianfar_driver-objs := gianfar.o \
obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o
+obj-$(if $(CONFIG_FSL_SDK_FMAN),y) += sdk_fman/
+obj-$(if $(CONFIG_FSL_SDK_DPAA_ETH),y) += sdk_dpaa/
+
obj-$(CONFIG_FSL_FMAN) += fman/
obj-$(CONFIG_FSL_DPAA_ETH) += dpaa/
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -55,6 +55,35 @@ config PTP_1588_CLOCK_GIANFAR
To compile this driver as a module, choose M here: the module
will be called gianfar_ptp.
+config PTP_1588_CLOCK_DPAA
+ tristate "Freescale DPAA as PTP clock"
+ depends on FSL_SDK_DPAA_ETH
+ select PTP_1588_CLOCK
+ select FSL_DPAA_TS
+ default n
+ help
+ This driver adds support for using the DPAA 1588 timer module
+ as a PTP clock. This clock is only useful if your PTP programs are
+ getting hardware time stamps on the PTP Ethernet packets
+ using the SO_TIMESTAMPING API.
+
+ To compile this driver as a module, choose M here: the module
+ will be called dpaa_ptp.
+
+config PTP_1588_CLOCK_DPAA2
+ tristate "Freescale DPAA2 as PTP clock"
+ depends on FSL_DPAA2_ETH
+ select PTP_1588_CLOCK
+ default y
+ help
+ This driver adds support for using the DPAA2 1588 timer module
+ as a PTP clock. This clock is only useful if your PTP programs are
+ getting hardware time stamps on the PTP Ethernet packets
+ using the SO_TIMESTAMPING API.
+
+ To compile this driver as a module, choose M here: the module
+ will be called dpaa2-rtc.
+
config PTP_1588_CLOCK_IXP46X
tristate "Intel IXP46x as PTP clock"
depends on IXP4XX_ETH
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -5,6 +5,7 @@ source "drivers/soc/amlogic/Kconfig"
source "drivers/soc/atmel/Kconfig"
source "drivers/soc/bcm/Kconfig"
source "drivers/soc/fsl/Kconfig"
+source "drivers/soc/fsl/ls2-console/Kconfig"
source "drivers/soc/imx/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
--- a/drivers/soc/fsl/Kconfig
+++ b/drivers/soc/fsl/Kconfig
@@ -16,3 +16,14 @@ config FSL_GUTS
Initially only reading SVR and registering soc device are supported.
Other guts accesses, such as reading RCW, should eventually be moved
into this driver as well.
+
+config FSL_SLEEP_FSM
+ bool
+ help
+ This driver configures a hardware FSM (Finite State Machine) for deep sleep.
+ The FSM is used to finish clean-ups at the last stage of system entering deep
+ sleep, and also wakes up system when a wake up event happens.
+
+if ARM || ARM64
+source "drivers/soc/fsl/Kconfig.arm"
+endif
--- /dev/null
+++ b/drivers/soc/fsl/Kconfig.arm
@@ -0,0 +1,16 @@
+#
+# Freescale ARM SOC Drivers
+#
+
+config LS_SOC_DRIVERS
+ bool "Layerscape Soc Drivers"
+ depends on ARCH_LAYERSCAPE || SOC_LS1021A
+ default n
+ help
+ Say y here to enable Freescale Layerscape Soc Device Drivers support.
+ The Soc Drivers provides the device driver that is a specific block
+ or feature on Layerscape platform.
+
+if LS_SOC_DRIVERS
+ source "drivers/soc/fsl/layerscape/Kconfig"
+endif
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -6,3 +6,6 @@ obj-$(CONFIG_FSL_DPAA) +
obj-$(CONFIG_QUICC_ENGINE) += qe/
obj-$(CONFIG_CPM) += qe/
obj-$(CONFIG_FSL_GUTS) += guts.o
+obj-$(CONFIG_FSL_LS2_CONSOLE) += ls2-console/
+obj-$(CONFIG_LS_SOC_DRIVERS) += layerscape/
+obj-$(CONFIG_FSL_SLEEP_FSM) += sleep_fsm.o
--- /dev/null
+++ b/drivers/soc/fsl/layerscape/Kconfig
@@ -0,0 +1,10 @@
+#
+# Layerscape Soc drivers
+#
+config FTM_ALARM
+ bool "FTM alarm driver"
+ default n
+ help
+ Say y here to enable FTM alarm support. The FTM alarm provides
+ alarm functions for wakeup system from deep sleep. There is only
+ one FTM can be used in ALARM(FTM 0).
--- /dev/null
+++ b/drivers/soc/fsl/layerscape/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_FTM_ALARM) += ftm_alarm.o
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -118,4 +118,8 @@ source "drivers/staging/vboxvideo/Kconfi
source "drivers/staging/pi433/Kconfig"
+source "drivers/staging/fsl_qbman/Kconfig"
+
+source "drivers/staging/fsl_ppfe/Kconfig"
+
endif # STAGING
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -50,3 +50,5 @@ obj-$(CONFIG_BCM2835_VCHIQ) += vc04_serv
obj-$(CONFIG_CRYPTO_DEV_CCREE) += ccree/
obj-$(CONFIG_DRM_VBOXVIDEO) += vboxvideo/
obj-$(CONFIG_PI433) += pi433/
+obj-$(CONFIG_FSL_SDK_DPA) += fsl_qbman/
+obj-$(CONFIG_FSL_PPFE) += fsl_ppfe/
--- a/drivers/staging/fsl-dpaa2/Kconfig
+++ b/drivers/staging/fsl-dpaa2/Kconfig
@@ -4,7 +4,7 @@
config FSL_DPAA2
bool "Freescale DPAA2 devices"
- depends on FSL_MC_BUS && ARCH_LAYERSCAPE
+ depends on FSL_MC_BUS
---help---
Build drivers for Freescale DataPath Acceleration
Architecture (DPAA2) family of SoCs.
@@ -16,3 +16,44 @@ config FSL_DPAA2_ETH
---help---
Ethernet driver for Freescale DPAA2 SoCs, using the
Freescale MC bus driver
+
+if FSL_DPAA2_ETH
+config FSL_DPAA2_ETH_USE_ERR_QUEUE
+ bool "Enable Rx error queue"
+ default n
+ ---help---
+ Allow Rx error frames to be enqueued on an error queue
+ and processed by the driver (by default they are dropped
+ in hardware).
+ This may impact performance, recommended for debugging
+ purposes only.
+
+# QBMAN_DEBUG requires some additional DPIO APIs
+config FSL_DPAA2_ETH_DEBUGFS
+ depends on DEBUG_FS
+ bool "Enable debugfs support"
+ default y
+ ---help---
+ Enable advanced statistics through debugfs interface.
+
+config FSL_DPAA2_ETH_DCB
+ bool "Data Center Bridging (DCB) Support"
+ default n
+ depends on DCB
+ ---help---
+ Say Y here if you want to use Data Center Bridging (DCB) features
+ (PFC) in the driver.
+
+ If unsure, say N.
+endif
+
+source "drivers/staging/fsl-dpaa2/mac/Kconfig"
+source "drivers/staging/fsl-dpaa2/evb/Kconfig"
+
+config FSL_DPAA2_ETHSW
+ tristate "Freescale DPAA2 Ethernet Switch"
+ depends on FSL_DPAA2
+ depends on NET_SWITCHDEV
+ ---help---
+ Driver for Freescale DPAA2 Ethernet Switch. Select
+ BRIDGE to have support for bridge tools.
--- a/drivers/staging/fsl-dpaa2/Makefile
+++ b/drivers/staging/fsl-dpaa2/Makefile
@@ -3,3 +3,7 @@
#
obj-$(CONFIG_FSL_DPAA2_ETH) += ethernet/
+obj-$(CONFIG_FSL_DPAA2_MAC) += mac/
+obj-$(CONFIG_FSL_DPAA2_EVB) += evb/
+obj-$(CONFIG_PTP_1588_CLOCK_DPAA2) += rtc/
+obj-$(CONFIG_FSL_DPAA2_ETHSW) += ethsw/
Generated by GNU Enscript 1.6.5.90.