OpenWrt – Rev 1
?pathlinks?
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,xway", "lantiq,ar9";
aliases {
serial0 = &asc1;
};
chosen {
stdout-path = "serial0:115200n8";
};
cpus {
cpu@0 {
compatible = "mips,mips34K";
};
};
memory@0 {
device_type = "memory";
};
biu@1f800000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,biu", "simple-bus";
reg = <0x1f800000 0x800000>;
ranges = <0x0 0x1f800000 0x7fffff>;
icu0: icu@80200 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
reg = <0x80200 0x28
0x80228 0x28
0x80250 0x28
0x80278 0x28
0x802a0 0x28>;
};
watchdog@803f0 {
compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
reg = <0x803f0 0x10>;
regmap = <&rcu0>;
};
};
sram@1f000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sram", "simple-bus";
reg = <0x1f000000 0x800000>;
ranges = <0x0 0x1f000000 0x7fffff>;
eiu0: eiu@101000 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,eiu-xway";
reg = <0x101000 0x1000>;
interrupt-parent = <&icu0>;
lantiq,eiu-irqs = <166 135 66 40 41 42>;
};
pmu0: pmu@102000 {
compatible = "lantiq,pmu-xway";
reg = <0x102000 0x1000>;
};
cgu0: cgu@103000 {
compatible = "lantiq,cgu-xway";
reg = <0x103000 0x1000>;
#clock-cells = <1>;
};
rcu0: rcu@203000 {
compatible = "lantiq,xrx100-rcu", "simple-mfd", "syscon";
reg = <0x203000 0x1000>;
ranges = <0x0 0x203000 0x100>;
big-endian;
reset: reset-controller@10 {
compatible = "lantiq,xrx100-reset", "lantiq,danube-reset";
reg = <0x10 4>, <0x14 4>;
#reset-cells = <2>;
};
usb_phy0: usb2-phy@18 {
compatible = "lantiq,xrx100-usb2-phy";
reg = <0x18 4>;
status = "disabled";
resets = <&reset 4 4>;
reset-names = "ctrl";
#phy-cells = <0>;
};
usb_phy1: usb2-phy@34 {
compatible = "lantiq,xrx100-usb2-phy";
reg = <0x34 4>;
status = "disabled";
resets = <&reset 28 28>;
reset-names = "ctrl";
#phy-cells = <0>;
};
reboot@10 {
compatible = "syscon-reboot";
reg = <0x10 4>;
regmap = <&rcu0>;
offset = <0x10>;
mask = <0x40000000>;
};
};
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
ranges = <0x0 0x10000000 0xeefffff>;
reg = <0x10000000 0xef00000>;
localbus: localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
1 0 0x4000000 0x4000010>; /* addsel1 */
compatible = "lantiq,localbus", "simple-bus";
};
gptu@e100a00 {
compatible = "lantiq,gptu-xway";
reg = <0xe100a00 0x100>;
interrupt-parent = <&icu0>;
interrupts = <126 127 128 129 130 131>;
};
asc0: serial@e100400 {
compatible = "lantiq,asc";
reg = <0xe100400 0x400>;
interrupt-parent = <&icu0>;
interrupts = <104 105 106>;
status = "disabled";
};
spi: spi@e100800 {
compatible = "lantiq,xrx100-spi";
reg = <0xe100800 0x100>;
interrupt-parent = <&icu0>;
interrupts = <22 23 24>;
interrupt-names = "spi_rx", "spi_tx", "spi_err",
"spi_frm";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
gpio: pinmux@e100b10 {
compatible = "lantiq,xrx100-pinctrl";
#gpio-cells = <2>;
gpio-controller;
reg = <0xe100b10 0xa0>;
};
stp: stp@e100bb0 {
#gpio-cells = <2>;
compatible = "lantiq,gpio-stp-xway";
gpio-controller;
reg = <0xe100bb0 0x40>;
status = "disabled";
};
asc1: serial@e100c00 {
compatible = "lantiq,asc";
reg = <0xe100c00 0x400>;
interrupt-parent = <&icu0>;
interrupts = <112 113 114>;
};
usb0: usb@e101000 {
compatible = "lantiq,arx100-usb";
reg = <0xe101000 0x1000
0xe120000 0x3f000>;
interrupt-parent = <&icu0>;
interrupts = <62 91>;
dr_mode = "host";
phys = <&usb_phy0>;
phy-names = "usb2-phy";
status = "disabled";
};
usb1: usb@e106000 {
compatible = "lantiq,arx100-usb";
reg = <0xe106000 0x1000
0xe1e0000 0x3f000>;
interrupt-parent = <&icu0>;
interrupts = <91>;
dr_mode = "host";
phys = <&usb_phy1>;
phy-names = "usb2-phy";
status = "disabled";
};
deu@e103100 {
compatible = "lantiq,deu-arx100";
reg = <0xe103100 0xf00>;
};
dma0: dma@e104100 {
compatible = "lantiq,dma-xway";
reg = <0xe104100 0x800>;
};
ebu0: ebu@e105300 {
compatible = "lantiq,ebu-xway";
reg = <0xe105300 0x100>;
};
mei@e116000 {
compatible = "lantiq,mei-xway";
interrupt-parent = <&icu0>;
interrupts = <63>;
};
gsw: etop@e180000 {
compatible = "lantiq,etop-xway";
reg = <0xe180000 0x40000
0xe108000 0x200>;
interrupt-parent = <&icu0>;
interrupts = <73 72>;
mac-address = [ 00 11 22 33 44 55 ];
};
ppe@e234000 {
compatible = "lantiq,ppe-arx100";
interrupt-parent = <&icu0>;
interrupts = <96>;
};
pci0: pci@e105400 {
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "lantiq,pci-xway";
bus-range = <0x0 0x0>;
ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
reg = <0x7000000 0x8000 /* config space */
0xe105400 0x400>; /* pci bridge */
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
req-mask = <0x1>;
};
};
adsl {
compatible = "lantiq,adsl-arx100";
};
};