OpenWrt – Rev 1

?pathlinks?

Blame – Last modification – View Log – Download

#include "vr9.dtsi"

#include <dt-bindings/input/input.h>
#include <dt-bindings/mips/lantiq_rcu_gphy.h>

/ {
        memory@0 {
                reg = <0x0 0x7f00000>;
        };

        usb_vbus: regulator-usb-vbus {
                compatible = "regulator-fixed";

                regulator-name = "USB_VBUS";

                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;

                gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
                enable-active-high;
        };
};

&eth0 {
        lan: interface@0 {
                compatible = "lantiq,xrx200-pdi";
                #address-cells = <1>;
                #size-cells = <0>;
                reg = <0>;
                mtd-mac-address = <&romfile 0xf100>;
                lantiq,switch;

                ethernet@0 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <0>;
                        phy-mode = "rgmii";
                        phy-handle = <&phy0>;
                        // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
                };
                ethernet@5 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <5>;
                        phy-mode = "rgmii";
                        phy-handle = <&phy5>;
                };
                ethernet@2 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <2>;
                        phy-mode = "gmii";
                        phy-handle = <&phy11>;
                };
                ethernet@3 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <4>;
                        phy-mode = "gmii";
                        phy-handle = <&phy13>;
                };
        };

        mdio@0 {
                #address-cells = <1>;
                #size-cells = <0>;
                compatible = "lantiq,xrx200-mdio";
                reg = <0>;

                phy0: ethernet-phy@0 {
                        reg = <0x0>;
                        compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
                };
                phy5: ethernet-phy@5 {
                        reg = <0x5>;
                        compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
                };
                phy11: ethernet-phy@11 {
                        reg = <0x11>;
                        compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
                };
                phy13: ethernet-phy@13 {
                        reg = <0x13>;
                        compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
                };
        };
};

&gphy0 {
        lantiq,gphy-mode = <GPHY_MODE_GE>;
};

&gphy1 {
        lantiq,gphy-mode = <GPHY_MODE_GE>;
};

&gpio {
        pinctrl-names = "default";
        pinctrl-0 = <&state_default>;

        state_default: pinmux {
                mdio {
                        lantiq,groups = "mdio";
                        lantiq,function = "mdio";
                };
                gphy-leds {
                        lantiq,groups = "gphy0 led1", "gphy1 led1";
                        lantiq,function = "gphy";
                        lantiq,pull = <2>;
                        lantiq,open-drain = <0>;
                        lantiq,output = <1>;
                };
                phy-rst {
                        lantiq,pins = "io42";
                        lantiq,pull = <0>;
                        lantiq,open-drain = <0>;
                        lantiq,output = <1>;
                };
                pcie-rst {
                        lantiq,pins = "io38";
                        lantiq,pull = <0>;
                        lantiq,output = <1>;
                };
        };
        pins_spi_default: pins_spi_default {
                spi_in {
                        lantiq,groups = "spi_di";
                        lantiq,function = "spi";
                };
                spi_out {
                        lantiq,groups = "spi_do", "spi_clk",
                                "spi_cs4";
                        lantiq,function = "spi";
                        lantiq,output = <1>;
                };
        };
};

&pci0 {
        status = "okay";
        gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};

&spi {
        status = "okay";

        pinctrl-names = "default";
        pinctrl-0 = <&pins_spi_default>;

        m25p80@4 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <4 0>;
                spi-max-frequency = <33250000>;
                m25p,fast-read;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                reg = <0x0 0x20000>;
                                label = "u-boot";
                                read-only;
                        };

                        partition@20000 {
                                reg = <0x20000 0xf90000>;
                                label = "firmware";
                        };

                        partition@fb0000 {
                                reg = <0xfb0000 0x10000>;
                                label = "radioDECT";
                                read-only;
                        };

                        partition@fc0000 {
                                reg = <0xfc0000 0x10000>;
                                label = "config";
                                read-only;
                        };

                        romfile: partition@fd0000 {
                                reg = <0xfd0000 0x10000>;
                                label = "romfile";
                                read-only;
                        };

                        partition@fe0000 {
                                reg = <0xfe0000 0x10000>;
                                label = "rom";
                                read-only;
                        };

                        partition@ff0000 {
                                reg = <0xff0000 0x10000>;
                                label = "radio";
                                read-only;
                        };
                };
        };
};

&usb_phy0 {
        status = "okay";
};

&usb_phy1 {
        status = "okay";
};

&usb0 {
        status = "okay";
        vbus-supply = <&usb_vbus>;
};

&usb1 {
        status = "okay";
        vbus-supply = <&usb_vbus>;
};