OpenWrt – Rev 1

Subversion Repositories:
Rev:
/dts-v1/;

#include "danube.dtsi"

#include <dt-bindings/input/input.h>

/ {
        compatible = "arcadyan,arv7518pw", "lantiq,xway", "lantiq,danube";
        model = "Astoria Networks ARV7518PW";

        chosen {
                bootargs = "console=ttyLTQ0,115200";
        };

        aliases {
                led-boot = &power_green;
                led-failsafe = &power_red;
                led-running = &power_green;
                led-upgrade = &power_green;

                led-dsl = &dsl;
                led-internet = &online_green;
                led-usb = &led_usb;
                led-wifi = &wifi;
        };

        memory@0 {
                reg = <0x0 0x4000000>;
        };

        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <100>;

                rfkill {
                        label = "rfkill";
                        gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RFKILL>;
                };
                reset {
                        label = "reset";
                        gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };

        gpio-leds {
                compatible = "gpio-leds";
                power_green: power {
                        label = "arv7518pw:green:power";
                        gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
                        default-state = "keep";
                };
                dsl: dsl {
                        label = "arv7518pw:green:dsl";
                        gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
                };
                online_green: online {
                        label = "arv7518pw:green:internet";
                        gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
                };
                wifi: wifi {
                        label = "arv7518pw:green:wlan";
                        gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
                };
                power_red: power2 {
                        label = "arv7518pw:red:power";
                        gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
                };
                online2 {
                        label = "arv7518pw:red:internet";
                        gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
                };
                led_usb: usb {
                        label = "arv7518pw:green:usb";
                        gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
                };
                voice {
                        label = "arv7518pw:green:voip";
                        gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
                };
                fxs1 {
                        label = "arv7518pw:green:phone1";
                        gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
                };
                fxs2 {
                        label = "arv7518pw:green:phone2";
                        gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
                };
                unlabeled {
                        label = "arv7518pw:amber:unlabeled";
                        gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
                };
                wps {
                        label = "arv7518pw:amber:wps";
                        gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
                };
                wps2 {
                        label = "arv7518pw:green:wps";
                        gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
                };
                wps3 {
                        label = "arv7518pw:red:wps";
                        gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
                };
        };
};

&gpio {
        pinctrl-names = "default";
        pinctrl-0 = <&state_default>;

        state_default: pinmux {
                ebu {
                        lantiq,groups = "ebu cs1";
                        lantiq,function = "ebu";
                };
                pci_in {
                        lantiq,groups = "req1";
                        lantiq,function = "pci";
                        lantiq,open-drain = <1>;
                        lantiq,pull = <2>;
                        lantiq,output = <0>;
                };
                pci_out {
                        lantiq,groups = "gnt1";
                        lantiq,function = "pci";
                        lantiq,pull = <0>;
                        lantiq,output = <1>;
                };
                pci_rst {
                        lantiq,pins = "io21";
                        lantiq,pull = <2>;
                        lantiq,output = <1>;
                };
                leds {
                        lantiq,pins = "io2", "io4", "io5", "io6", "io7", "io8", "io19";
                        lantiq,output = <1>;
                };
                keys {
                        lantiq,pins = "io28", "io30";
                        lantiq,output = <0>;
                        lantiq,pull = <2>;
                        lantiq,open-drain = <1>;
                };
        };

        usb_vbus: regulator-usb-vbus {
                compatible = "regulator-fixed";

                regulator-name = "USB_VBUS";

                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;

                gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
                enable-active-high;
        };
};

&gpiomm {
        status = "okay";
        lantiq,shadow = <0x0>;
};

/*
#define SWITCH_RESET          13
*/
&gsw {
        phy-mode = "mii";
        mtd-mac-address = <&boardconfig 0x16>;
};

&localbus {
        nor@0 {
                compatible = "lantiq,nor";
                bank-width = <2>;
                reg = <0 0x0 0x2000000>;
                #address-cells = <1>;
                #size-cells = <1>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "uboot";
                                reg = <0x00000 0x10000>;
                                read-only;
                        };

                        partition@10000 {
                                label = "uboot_env";
                                reg = <0x10000 0x10000>;
                        };

                        partition@20000 {
                                label = "firmware";
                                reg = <0x20000 0x7d0000>;
                        };

                        boardconfig: partition@400000 {
                                label = "boardconfig";
                                reg = <0x7f0000 0x10000>;
                                read-only;
                        };
                };
        };
};

&pci0 {
        status = "okay";
        gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
        lantiq,external-clock;
        req-mask = <0xf>;

        wifi@168c,0029 {
                compatible = "pci168c,0029";
                reg = <0x7000 0 0 0 0>;
                qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
                mtd-mac-address = <&boardconfig 0x16>;
                mtd-mac-address-increment = <1>;
        };
};

&usb_phy {
        status = "okay";
};

&usb {
        status = "okay";
        vbus-supply = <&usb_vbus>;
};

&vmmc {
        status = "okay";
};