OpenWrt – Rev 1
?pathlinks?
From d27c303e828d7e42f339a459d2abfe30c51698e9 Mon Sep 17 00:00:00 2001
From: Sham Muthayyan <smuthayy@codeaurora.org>
Date: Tue, 26 Jul 2016 12:28:31 +0530
Subject: PCI: qcom: Programming the PCIE iATU for IPQ806x
Resolved PCIE EP detection errors caused due to missing iATU programming.
Change-Id: Ie95c0f8cb940abc0192a8a3c4e825ddba54b72fe
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
---
drivers/pci/host/pcie-qcom.c | 77 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -83,6 +83,30 @@
#define PCIE20_CAP_LINK_1 (PCIE20_CAP + 0x14)
#define PCIE_CAP_LINK1_VAL 0x2FD7F
+#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
+
+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818
+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c
+
+#define PCIE20_PLR_IATU_VIEWPORT 0x900
+#define PCIE20_PLR_IATU_REGION_OUTBOUND (0x0 << 31)
+#define PCIE20_PLR_IATU_REGION_INDEX(x) (x << 0)
+
+#define PCIE20_PLR_IATU_CTRL1 0x904
+#define PCIE20_PLR_IATU_TYPE_CFG0 (0x4 << 0)
+#define PCIE20_PLR_IATU_TYPE_MEM (0x0 << 0)
+
+#define PCIE20_PLR_IATU_CTRL2 0x908
+#define PCIE20_PLR_IATU_ENABLE BIT(31)
+
+#define PCIE20_PLR_IATU_LBAR 0x90C
+#define PCIE20_PLR_IATU_UBAR 0x910
+#define PCIE20_PLR_IATU_LAR 0x914
+#define PCIE20_PLR_IATU_LTAR 0x918
+#define PCIE20_PLR_IATU_UTAR 0x91c
+
+#define MSM_PCIE_DEV_CFG_ADDR 0x01000000
+
#define PCIE20_PARF_Q2A_FLUSH 0x1AC
#define PCIE20_MISC_CONTROL_1_REG 0x8BC
@@ -251,6 +275,57 @@ static void qcom_pcie_2_1_0_ltssm_enable
writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
}
+static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev)
+{
+ struct pcie_port *pp = &pcie->pci->pp;
+
+ /*
+ * program and enable address translation region 0 (device config
+ * address space); region type config;
+ * axi config address range to device config address range
+ */
+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
+ PCIE20_PLR_IATU_REGION_INDEX(0),
+ pcie->pci->dbi_base + PCIE20_PLR_IATU_VIEWPORT);
+
+ writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL1);
+ writel(PCIE20_PLR_IATU_ENABLE, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL2);
+ writel(pp->cfg0_base, pcie->pci->dbi_base + PCIE20_PLR_IATU_LBAR);
+ writel((pp->cfg0_base >> 32), pcie->pci->dbi_base + PCIE20_PLR_IATU_UBAR);
+ writel((pp->cfg0_base + pp->cfg0_size - 1),
+ pcie->pci->dbi_base + PCIE20_PLR_IATU_LAR);
+ writel(busdev, pcie->pci->dbi_base + PCIE20_PLR_IATU_LTAR);
+ writel(0, pcie->pci->dbi_base + PCIE20_PLR_IATU_UTAR);
+}
+
+static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie)
+{
+ struct pcie_port *pp = &pcie->pci->pp;
+
+ /*
+ * program and enable address translation region 2 (device resource
+ * address space); region type memory;
+ * axi device bar address range to device bar address range
+ */
+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
+ PCIE20_PLR_IATU_REGION_INDEX(2),
+ pcie->pci->dbi_base + PCIE20_PLR_IATU_VIEWPORT);
+
+ writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL1);
+ writel(PCIE20_PLR_IATU_ENABLE, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL2);
+ writel(pp->mem_base, pcie->pci->dbi_base + PCIE20_PLR_IATU_LBAR);
+ writel((pp->mem_base >> 32), pcie->pci->dbi_base + PCIE20_PLR_IATU_UBAR);
+ writel(pp->mem_base + pp->mem_size - 1,
+ pcie->pci->dbi_base + PCIE20_PLR_IATU_LAR);
+ writel(pp->mem_bus_addr, pcie->pci->dbi_base + PCIE20_PLR_IATU_LTAR);
+ writel(upper_32_bits(pp->mem_bus_addr),
+ pcie->pci->dbi_base + PCIE20_PLR_IATU_UTAR);
+
+ /* 256B PCIE buffer setting */
+ writel(0x1, pcie->pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0);
+ writel(0x1, pcie->pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
+}
+
static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
@@ -465,6 +540,9 @@ static int qcom_pcie_init_2_1_0(struct q
writel(CFG_BRIDGE_SB_INIT,
pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
+ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR);
+ qcom_pcie_prog_viewport_mem2_outbound(pcie);
+
return 0;
err_deassert_ahb: