OpenWrt – Rev 1

Subversion Repositories:
Rev:
From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Thu, 19 Jan 2017 02:01:31 +0100
Subject: [PATCH 33/38] NET: add qualcomm essedma ethernet driver

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
 drivers/net/ethernet/qualcomm/Kconfig  | 9 +++++++++
 drivers/net/ethernet/qualcomm/Makefile | 1 +
 2 files changed, 10 insertions(+)

--- a/drivers/net/ethernet/qualcomm/Kconfig
+++ b/drivers/net/ethernet/qualcomm/Kconfig
@@ -61,4 +61,13 @@ config QCOM_EMAC
 
 source "drivers/net/ethernet/qualcomm/rmnet/Kconfig"
 
+config ESSEDMA
+       tristate "Qualcomm Atheros ESS Edma support"
+       ---help---
+         This driver supports ethernet edma adapter.
+         Say Y to build this driver.
+
+         To compile this driver as a module, choose M here. The module
+         will be called essedma.ko.
+
 endif # NET_VENDOR_QUALCOMM
--- a/drivers/net/ethernet/qualcomm/Makefile
+++ b/drivers/net/ethernet/qualcomm/Makefile
@@ -10,5 +10,6 @@ obj-$(CONFIG_QCA7000_UART) += qcauart.o
 qcauart-objs := qca_uart.o
 
 obj-y += emac/
+obj-$(CONFIG_ESSEDMA) += essedma/
 
 obj-$(CONFIG_RMNET) += rmnet/
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/essedma/Makefile
@@ -0,0 +1,9 @@
+#
+## Makefile for the Qualcomm Atheros ethernet edma driver
+#
+
+
+obj-$(CONFIG_ESSEDMA) += essedma.o
+
+essedma-objs := edma_axi.o edma.o edma_ethtool.o
+
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c
@@ -0,0 +1,2143 @@
+/*
+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all copies.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/if_vlan.h>
+#include "ess_edma.h"
+#include "edma.h"
+
+extern struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED];
+bool edma_stp_rstp;
+u16 edma_ath_eth_type;
+
+/* edma_skb_priority_offset()
+ *     get edma skb priority
+ */
+static unsigned int edma_skb_priority_offset(struct sk_buff *skb)
+{
+       return (skb->priority >> 2) & 1;
+}
+
+/* edma_alloc_tx_ring()
+ *     Allocate Tx descriptors ring
+ */
+static int edma_alloc_tx_ring(struct edma_common_info *edma_cinfo,
+                             struct edma_tx_desc_ring *etdr)
+{
+       struct platform_device *pdev = edma_cinfo->pdev;
+
+       /* Initialize ring */
+       etdr->size = sizeof(struct edma_sw_desc) * etdr->count;
+       etdr->sw_next_to_fill = 0;
+       etdr->sw_next_to_clean = 0;
+
+       /* Allocate SW descriptors */
+       etdr->sw_desc = vzalloc(etdr->size);
+       if (!etdr->sw_desc) {
+               dev_err(&pdev->dev, "buffer alloc of tx ring failed=%p", etdr);
+               return -ENOMEM;
+       }
+
+       /* Allocate HW descriptors */
+       etdr->hw_desc = dma_alloc_coherent(&pdev->dev, etdr->size, &etdr->dma,
+                                         GFP_KERNEL);
+       if (!etdr->hw_desc) {
+               dev_err(&pdev->dev, "descriptor allocation for tx ring failed");
+               vfree(etdr->sw_desc);
+               return -ENOMEM;
+       }
+
+       return 0;
+}
+
+/* edma_free_tx_ring()
+ *     Free tx rings allocated by edma_alloc_tx_rings
+ */
+static void edma_free_tx_ring(struct edma_common_info *edma_cinfo,
+                             struct edma_tx_desc_ring *etdr)
+{
+       struct platform_device *pdev = edma_cinfo->pdev;
+
+       if (likely(etdr->dma))
+               dma_free_coherent(&pdev->dev, etdr->size, etdr->hw_desc,
+                                etdr->dma);
+
+       vfree(etdr->sw_desc);
+       etdr->sw_desc = NULL;
+}
+
+/* edma_alloc_rx_ring()
+ *     allocate rx descriptor ring
+ */
+static int edma_alloc_rx_ring(struct edma_common_info *edma_cinfo,
+                            struct edma_rfd_desc_ring *erxd)
+{
+       struct platform_device *pdev = edma_cinfo->pdev;
+
+       erxd->size = sizeof(struct edma_sw_desc) * erxd->count;
+       erxd->sw_next_to_fill = 0;
+       erxd->sw_next_to_clean = 0;
+
+       /* Allocate SW descriptors */
+       erxd->sw_desc = vzalloc(erxd->size);
+       if (!erxd->sw_desc)
+               return -ENOMEM;
+
+       /* Alloc HW descriptors */
+       erxd->hw_desc = dma_alloc_coherent(&pdev->dev, erxd->size, &erxd->dma,
+                       GFP_KERNEL);
+       if (!erxd->hw_desc) {
+               vfree(erxd->sw_desc);
+               return -ENOMEM;
+       }
+
+       return 0;
+}
+
+/* edma_free_rx_ring()
+ *     Free rx ring allocated by alloc_rx_ring
+ */
+static void edma_free_rx_ring(struct edma_common_info *edma_cinfo,
+                            struct edma_rfd_desc_ring *rxdr)
+{
+       struct platform_device *pdev = edma_cinfo->pdev;
+
+       if (likely(rxdr->dma))
+               dma_free_coherent(&pdev->dev, rxdr->size, rxdr->hw_desc,
+                                rxdr->dma);
+
+       vfree(rxdr->sw_desc);
+       rxdr->sw_desc = NULL;
+}
+
+/* edma_configure_tx()
+ *     Configure transmission control data
+ */
+static void edma_configure_tx(struct edma_common_info *edma_cinfo)
+{
+       u32 txq_ctrl_data;
+
+       txq_ctrl_data = (EDMA_TPD_BURST << EDMA_TXQ_NUM_TPD_BURST_SHIFT);
+       txq_ctrl_data |= EDMA_TXQ_CTRL_TPD_BURST_EN;
+       txq_ctrl_data |= (EDMA_TXF_BURST << EDMA_TXQ_TXF_BURST_NUM_SHIFT);
+       edma_write_reg(EDMA_REG_TXQ_CTRL, txq_ctrl_data);
+}
+
+
+/* edma_configure_rx()
+ *     configure reception control data
+ */
+static void edma_configure_rx(struct edma_common_info *edma_cinfo)
+{
+       struct edma_hw *hw = &edma_cinfo->hw;
+       u32 rss_type, rx_desc1, rxq_ctrl_data;
+
+       /* Set RSS type */
+       rss_type = hw->rss_type;
+       edma_write_reg(EDMA_REG_RSS_TYPE, rss_type);
+
+       /* Set RFD burst number */
+       rx_desc1 = (EDMA_RFD_BURST << EDMA_RXQ_RFD_BURST_NUM_SHIFT);
+
+       /* Set RFD prefetch threshold */
+       rx_desc1 |= (EDMA_RFD_THR << EDMA_RXQ_RFD_PF_THRESH_SHIFT);
+
+       /* Set RFD in host ring low threshold to generte interrupt */
+       rx_desc1 |= (EDMA_RFD_LTHR << EDMA_RXQ_RFD_LOW_THRESH_SHIFT);
+       edma_write_reg(EDMA_REG_RX_DESC1, rx_desc1);
+
+       /* Set Rx FIFO threshold to start to DMA data to host */
+       rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE;
+
+       /* Set RX remove vlan bit */
+       rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN;
+
+       edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data);
+}
+
+/* edma_alloc_rx_buf()
+ *     does skb allocation for the received packets.
+ */
+static int edma_alloc_rx_buf(struct edma_common_info
+                            *edma_cinfo,
+                            struct edma_rfd_desc_ring *erdr,
+                            int cleaned_count, int queue_id)
+{
+       struct platform_device *pdev = edma_cinfo->pdev;
+       struct edma_rx_free_desc *rx_desc;
+       struct edma_sw_desc *sw_desc;
+       struct sk_buff *skb;
+       unsigned int i;
+       u16 prod_idx, length;
+       u32 reg_data;
+
+       if (cleaned_count > erdr->count) {
+               dev_err(&pdev->dev, "Incorrect cleaned_count %d",
+                      cleaned_count);
+               return -1;
+       }
+
+       i = erdr->sw_next_to_fill;
+
+       while (cleaned_count) {
+               sw_desc = &erdr->sw_desc[i];
+               length = edma_cinfo->rx_head_buffer_len;
+
+               if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_REUSE) {
+                       skb = sw_desc->skb;
+               } else {
+                       /* alloc skb */
+                       skb = netdev_alloc_skb(edma_netdev[0], length);
+                       if (!skb) {
+                               /* Better luck next round */
+                               break;
+                       }
+               }
+
+               if (edma_cinfo->page_mode) {
+                       struct page *pg = alloc_page(GFP_ATOMIC);
+
+                       if (!pg) {
+                               dev_kfree_skb_any(skb);
+                               break;
+                       }
+
+                       sw_desc->dma = dma_map_page(&pdev->dev, pg, 0,
+                                                  edma_cinfo->rx_page_buffer_len,
+                                                  DMA_FROM_DEVICE);
+                       if (dma_mapping_error(&pdev->dev,
+                                   sw_desc->dma)) {
+                               __free_page(pg);
+                               dev_kfree_skb_any(skb);
+                               break;
+                       }
+
+                       skb_fill_page_desc(skb, 0, pg, 0,
+                                          edma_cinfo->rx_page_buffer_len);
+                       sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_FRAG;
+                       sw_desc->length = edma_cinfo->rx_page_buffer_len;
+               } else {
+                       sw_desc->dma = dma_map_single(&pdev->dev, skb->data,
+                                                    length, DMA_FROM_DEVICE);
+                       if (dma_mapping_error(&pdev->dev,
+                          sw_desc->dma)) {
+                               dev_kfree_skb_any(skb);
+                               break;
+                       }
+
+                       sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_HEAD;
+                       sw_desc->length = length;
+               }
+
+               /* Update the buffer info */
+               sw_desc->skb = skb;
+               rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[i]);
+               rx_desc->buffer_addr = cpu_to_le64(sw_desc->dma);
+               if (++i == erdr->count)
+                       i = 0;
+               cleaned_count--;
+       }
+
+       erdr->sw_next_to_fill = i;
+
+       if (i == 0)
+               prod_idx = erdr->count - 1;
+       else
+               prod_idx = i - 1;
+
+       /* Update the producer index */
+       edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &reg_data);
+       reg_data &= ~EDMA_RFD_PROD_IDX_BITS;
+       reg_data |= prod_idx;
+       edma_write_reg(EDMA_REG_RFD_IDX_Q(queue_id), reg_data);
+       return cleaned_count;
+}
+
+/* edma_init_desc()
+ *     update descriptor ring size, buffer and producer/consumer index
+ */
+static void edma_init_desc(struct edma_common_info *edma_cinfo)
+{
+       struct edma_rfd_desc_ring *rfd_ring;
+       struct edma_tx_desc_ring *etdr;
+       int i = 0, j = 0;
+       u32 data = 0;
+       u16 hw_cons_idx = 0;
+
+       /* Set the base address of every TPD ring. */
+       for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
+               etdr = edma_cinfo->tpd_ring[i];
+
+               /* Update descriptor ring base address */
+               edma_write_reg(EDMA_REG_TPD_BASE_ADDR_Q(i), (u32)etdr->dma);
+               edma_read_reg(EDMA_REG_TPD_IDX_Q(i), &data);
+
+               /* Calculate hardware consumer index */
+               hw_cons_idx = (data >> EDMA_TPD_CONS_IDX_SHIFT) & 0xffff;
+               etdr->sw_next_to_fill = hw_cons_idx;
+               etdr->sw_next_to_clean = hw_cons_idx;
+               data &= ~(EDMA_TPD_PROD_IDX_MASK << EDMA_TPD_PROD_IDX_SHIFT);
+               data |= hw_cons_idx;
+
+               /* update producer index */
+               edma_write_reg(EDMA_REG_TPD_IDX_Q(i), data);
+
+               /* update SW consumer index register */
+               edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(i), hw_cons_idx);
+
+               /* Set TPD ring size */
+               edma_write_reg(EDMA_REG_TPD_RING_SIZE,
+                              edma_cinfo->tx_ring_count &
+                                   EDMA_TPD_RING_SIZE_MASK);
+       }
+
+       for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
+               rfd_ring = edma_cinfo->rfd_ring[j];
+               /* Update Receive Free descriptor ring base address */
+               edma_write_reg(EDMA_REG_RFD_BASE_ADDR_Q(j),
+                       (u32)(rfd_ring->dma));
+               j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
+       }
+
+       data = edma_cinfo->rx_head_buffer_len;
+       if (edma_cinfo->page_mode)
+               data = edma_cinfo->rx_page_buffer_len;
+
+       data &= EDMA_RX_BUF_SIZE_MASK;
+       data <<= EDMA_RX_BUF_SIZE_SHIFT;
+
+       /* Update RFD ring size and RX buffer size */
+       data |= (edma_cinfo->rx_ring_count & EDMA_RFD_RING_SIZE_MASK)
+               << EDMA_RFD_RING_SIZE_SHIFT;
+
+       edma_write_reg(EDMA_REG_RX_DESC0, data);
+
+       /* Disable TX FIFO low watermark and high watermark */
+       edma_write_reg(EDMA_REG_TXF_WATER_MARK, 0);
+
+       /* Load all of base address above */
+       edma_read_reg(EDMA_REG_TX_SRAM_PART, &data);
+       data |= 1 << EDMA_LOAD_PTR_SHIFT;
+       edma_write_reg(EDMA_REG_TX_SRAM_PART, data);
+}
+
+/* edma_receive_checksum
+ *     Api to check checksum on receive packets
+ */
+static void edma_receive_checksum(struct edma_rx_return_desc *rd,
+                                                struct sk_buff *skb)
+{
+       skb_checksum_none_assert(skb);
+
+       /* check the RRD IP/L4 checksum bit to see if
+        * its set, which in turn indicates checksum
+        * failure.
+        */
+       if (rd->rrd6 & EDMA_RRD_CSUM_FAIL_MASK)
+               return;
+
+       skb->ip_summed = CHECKSUM_UNNECESSARY;
+}
+
+/* edma_clean_rfd()
+ *     clean up rx resourcers on error
+ */
+static void edma_clean_rfd(struct edma_rfd_desc_ring *erdr, u16 index)
+{
+       struct edma_rx_free_desc *rx_desc;
+       struct edma_sw_desc *sw_desc;
+
+       rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[index]);
+       sw_desc = &erdr->sw_desc[index];
+       if (sw_desc->skb) {
+               dev_kfree_skb_any(sw_desc->skb);
+               sw_desc->skb = NULL;
+       }
+
+       memset(rx_desc, 0, sizeof(struct edma_rx_free_desc));
+}
+
+/* edma_rx_complete_fraglist()
+ *     Complete Rx processing for fraglist skbs
+ */
+static void edma_rx_complete_stp_rstp(struct sk_buff *skb, int port_id, struct edma_rx_return_desc *rd)
+{
+       int i;
+       u32 priority;
+       u16 port_type;
+       u8 mac_addr[EDMA_ETH_HDR_LEN];
+
+       port_type = (rd->rrd1 >> EDMA_RRD_PORT_TYPE_SHIFT)
+                               & EDMA_RRD_PORT_TYPE_MASK;
+       /* if port type is 0x4, then only proceed with
+        * other stp/rstp calculation
+        */
+       if (port_type == EDMA_RX_ATH_HDR_RSTP_PORT_TYPE) {
+               u8 bpdu_mac[6] = {0x01, 0x80, 0xc2, 0x00, 0x00, 0x00};
+
+               /* calculate the frame priority */
+               priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT)
+                       & EDMA_RRD_PRIORITY_MASK;
+
+               for (i = 0; i < EDMA_ETH_HDR_LEN; i++)
+                       mac_addr[i] = skb->data[i];
+
+               /* Check if destination mac addr is bpdu addr */
+               if (!memcmp(mac_addr, bpdu_mac, 6)) {
+                       /* destination mac address is BPDU
+                        * destination mac address, then add
+                        * atheros header to the packet.
+                        */
+                       u16 athr_hdr = (EDMA_RX_ATH_HDR_VERSION << EDMA_RX_ATH_HDR_VERSION_SHIFT) |
+                               (priority << EDMA_RX_ATH_HDR_PRIORITY_SHIFT) |
+                               (EDMA_RX_ATH_HDR_RSTP_PORT_TYPE << EDMA_RX_ATH_PORT_TYPE_SHIFT) | port_id;
+                       skb_push(skb, 4);
+                       memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN);
+                       *(uint16_t *)&skb->data[12] = htons(edma_ath_eth_type);
+                       *(uint16_t *)&skb->data[14] = htons(athr_hdr);
+               }
+       }
+}
+
+/*
+ * edma_rx_complete_fraglist()
+ *     Complete Rx processing for fraglist skbs
+ */
+static int edma_rx_complete_fraglist(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean,
+                                       u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo)
+{
+       struct platform_device *pdev = edma_cinfo->pdev;
+       struct edma_hw *hw = &edma_cinfo->hw;
+       struct sk_buff *skb_temp;
+       struct edma_sw_desc *sw_desc;
+       int i;
+       u16 size_remaining;
+
+       skb->data_len = 0;
+       skb->tail += (hw->rx_head_buff_size - 16);
+       skb->len = skb->truesize = length;
+       size_remaining = length - (hw->rx_head_buff_size - 16);
+
+       /* clean-up all related sw_descs */
+       for (i = 1; i < num_rfds; i++) {
+               struct sk_buff *skb_prev;
+               sw_desc = &erdr->sw_desc[sw_next_to_clean];
+               skb_temp = sw_desc->skb;
+
+               dma_unmap_single(&pdev->dev, sw_desc->dma,
+                       sw_desc->length, DMA_FROM_DEVICE);
+
+               if (size_remaining < hw->rx_head_buff_size)
+                       skb_put(skb_temp, size_remaining);
+               else
+                       skb_put(skb_temp, hw->rx_head_buff_size);
+
+               /*
+                * If we are processing the first rfd, we link
+                * skb->frag_list to the skb corresponding to the
+                * first RFD
+                */
+               if (i == 1)
+                       skb_shinfo(skb)->frag_list = skb_temp;
+               else
+                       skb_prev->next = skb_temp;
+               skb_prev = skb_temp;
+               skb_temp->next = NULL;
+
+               skb->data_len += skb_temp->len;
+               size_remaining -= skb_temp->len;
+
+               /* Increment SW index */
+               sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
+               (*cleaned_count)++;
+       }
+
+       return sw_next_to_clean;
+}
+
+/* edma_rx_complete_paged()
+ *     Complete Rx processing for paged skbs
+ */
+static int edma_rx_complete_paged(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean,
+                                       u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo)
+{
+       struct platform_device *pdev = edma_cinfo->pdev;
+       struct sk_buff *skb_temp;
+       struct edma_sw_desc *sw_desc;
+       int i;
+       u16 size_remaining;
+
+       skb_frag_t *frag = &skb_shinfo(skb)->frags[0];
+
+       /* Setup skbuff fields */
+       skb->len = length;
+
+       if (likely(num_rfds <= 1)) {
+               skb->data_len = length;
+               skb->truesize += edma_cinfo->rx_page_buffer_len;
+               skb_fill_page_desc(skb, 0, skb_frag_page(frag),
+                               16, length);
+       } else {
+               frag->size -= 16;
+               skb->data_len = frag->size;
+               skb->truesize += edma_cinfo->rx_page_buffer_len;
+               size_remaining = length - frag->size;
+
+               skb_fill_page_desc(skb, 0, skb_frag_page(frag),
+                               16, frag->size);
+
+               /* clean-up all related sw_descs */
+               for (i = 1; i < num_rfds; i++) {
+                       sw_desc = &erdr->sw_desc[sw_next_to_clean];
+                       skb_temp = sw_desc->skb;
+                       frag = &skb_shinfo(skb_temp)->frags[0];
+                       dma_unmap_page(&pdev->dev, sw_desc->dma,
+                               sw_desc->length, DMA_FROM_DEVICE);
+
+                       if (size_remaining < edma_cinfo->rx_page_buffer_len)
+                               frag->size = size_remaining;
+
+                       skb_fill_page_desc(skb, i, skb_frag_page(frag),
+                                       0, frag->size);
+
+                       skb_shinfo(skb_temp)->nr_frags = 0;
+                       dev_kfree_skb_any(skb_temp);
+
+                       skb->data_len += frag->size;
+                       skb->truesize += edma_cinfo->rx_page_buffer_len;
+                       size_remaining -= frag->size;
+
+                       /* Increment SW index */
+                       sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
+                       (*cleaned_count)++;
+               }
+       }
+
+       return sw_next_to_clean;
+}
+
+/*
+ * edma_rx_complete()
+ *     Main api called from the poll function to process rx packets.
+ */
+static void edma_rx_complete(struct edma_common_info *edma_cinfo,
+                           int *work_done, int work_to_do, int queue_id,
+                           struct napi_struct *napi)
+{
+       struct platform_device *pdev = edma_cinfo->pdev;
+       struct edma_rfd_desc_ring *erdr = edma_cinfo->rfd_ring[queue_id];
+       struct net_device *netdev;
+       struct edma_adapter *adapter;
+       struct edma_sw_desc *sw_desc;
+       struct sk_buff *skb;
+       struct edma_rx_return_desc *rd;
+       u16 hash_type, rrd[8], cleaned_count = 0, length = 0, num_rfds = 1,
+           sw_next_to_clean, hw_next_to_clean = 0, vlan = 0, ret_count = 0;
+       u32 data = 0;
+       u8 *vaddr;
+       int port_id, i, drop_count = 0;
+       u32 priority;
+       u16 count = erdr->count, rfd_avail;
+       u8 queue_to_rxid[8] = {0, 0, 1, 1, 2, 2, 3, 3};
+
+       sw_next_to_clean = erdr->sw_next_to_clean;
+
+       edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data);
+       hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) &
+                          EDMA_RFD_CONS_IDX_MASK;
+
+       do {
+               while (sw_next_to_clean != hw_next_to_clean) {
+                       if (!work_to_do)
+                               break;
+
+                       sw_desc = &erdr->sw_desc[sw_next_to_clean];
+                       skb = sw_desc->skb;
+
+                       /* Unmap the allocated buffer */
+                       if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD))
+                               dma_unmap_single(&pdev->dev, sw_desc->dma,
+                                               sw_desc->length, DMA_FROM_DEVICE);
+                       else
+                               dma_unmap_page(&pdev->dev, sw_desc->dma,
+                                             sw_desc->length, DMA_FROM_DEVICE);
+
+                       /* Get RRD */
+                       if (edma_cinfo->page_mode) {
+                               vaddr = kmap_atomic(skb_frag_page(&skb_shinfo(skb)->frags[0]));
+                               memcpy((uint8_t *)&rrd[0], vaddr, 16);
+                               rd = (struct edma_rx_return_desc *)rrd;
+                               kunmap_atomic(vaddr);
+                       } else {
+                               rd = (struct edma_rx_return_desc *)skb->data;
+                       }
+
+                       /* Check if RRD is valid */
+                       if (!(rd->rrd7 & EDMA_RRD_DESC_VALID)) {
+                               edma_clean_rfd(erdr, sw_next_to_clean);
+                               sw_next_to_clean = (sw_next_to_clean + 1) &
+                                                  (erdr->count - 1);
+                               cleaned_count++;
+                               continue;
+                       }
+
+                       /* Get the number of RFDs from RRD */
+                       num_rfds = rd->rrd1 & EDMA_RRD_NUM_RFD_MASK;
+
+                       /* Get Rx port ID from switch */
+                       port_id = (rd->rrd1 >> EDMA_PORT_ID_SHIFT) & EDMA_PORT_ID_MASK;
+                       if ((!port_id) || (port_id > EDMA_MAX_PORTID_SUPPORTED)) {
+                               dev_err(&pdev->dev, "Invalid RRD source port bit set");
+                               for (i = 0; i < num_rfds; i++) {
+                                       edma_clean_rfd(erdr, sw_next_to_clean);
+                                       sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
+                                       cleaned_count++;
+                               }
+                               continue;
+                       }
+
+                       /* check if we have a sink for the data we receive.
+                        * If the interface isn't setup, we have to drop the
+                        * incoming data for now.
+                        */
+                       netdev = edma_cinfo->portid_netdev_lookup_tbl[port_id];
+                       if (!netdev) {
+                               edma_clean_rfd(erdr, sw_next_to_clean);
+                               sw_next_to_clean = (sw_next_to_clean + 1) &
+                                                  (erdr->count - 1);
+                               cleaned_count++;
+                               continue;
+                       }
+                       adapter = netdev_priv(netdev);
+
+                       /* This code is added to handle a usecase where high
+                        * priority stream and a low priority stream are
+                        * received simultaneously on DUT. The problem occurs
+                        * if one of the  Rx rings is full and the corresponding
+                        * core is busy with other stuff. This causes ESS CPU
+                        * port to backpressure all incoming traffic including
+                        * high priority one. We monitor free descriptor count
+                        * on each CPU and whenever it reaches threshold (< 80),
+                        * we drop all low priority traffic and let only high
+                        * priotiy traffic pass through. We can hence avoid
+                        * ESS CPU port to send backpressure on high priroity
+                        * stream.
+                        */
+                       priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT)
+                               & EDMA_RRD_PRIORITY_MASK;
+                       if (likely(!priority && !edma_cinfo->page_mode && (num_rfds <= 1))) {
+                               rfd_avail = (count + sw_next_to_clean - hw_next_to_clean - 1) & (count - 1);
+                               if (rfd_avail < EDMA_RFD_AVAIL_THR) {
+                                       sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_REUSE;
+                                       sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
+                                       adapter->stats.rx_dropped++;
+                                       cleaned_count++;
+                                       drop_count++;
+                                       if (drop_count == 3) {
+                                               work_to_do--;
+                                               (*work_done)++;
+                                               drop_count = 0;
+                                       }
+                                       if (cleaned_count == EDMA_RX_BUFFER_WRITE) {
+                                               /* If buffer clean count reaches 16, we replenish HW buffers. */
+                                               ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
+                                               edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
+                                                             sw_next_to_clean);
+                                               cleaned_count = ret_count;
+                                       }
+                                       continue;
+                               }
+                       }
+
+                       work_to_do--;
+                       (*work_done)++;
+
+                       /* Increment SW index */
+                       sw_next_to_clean = (sw_next_to_clean + 1) &
+                                          (erdr->count - 1);
+
+                       cleaned_count++;
+
+                       /* Get the packet size and allocate buffer */
+                       length = rd->rrd6 & EDMA_RRD_PKT_SIZE_MASK;
+
+                       if (edma_cinfo->page_mode) {
+                               /* paged skb */
+                               sw_next_to_clean = edma_rx_complete_paged(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo);
+                               if (!pskb_may_pull(skb, ETH_HLEN)) {
+                                       dev_kfree_skb_any(skb);
+                                       continue;
+                               }
+                       } else {
+                               /* single or fraglist skb */
+
+                               /* Addition of 16 bytes is required, as in the packet
+                                * first 16 bytes are rrd descriptors, so actual data
+                                * starts from an offset of 16.
+                                */
+                               skb_reserve(skb, 16);
+                               if (likely((num_rfds <= 1) || !edma_cinfo->fraglist_mode)) {
+                                       skb_put(skb, length);
+                               } else {
+                                       sw_next_to_clean = edma_rx_complete_fraglist(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo);
+                               }
+                       }
+
+                       if (edma_stp_rstp) {
+                               edma_rx_complete_stp_rstp(skb, port_id, rd);
+                       }
+
+                       skb->protocol = eth_type_trans(skb, netdev);
+
+                       /* Record Rx queue for RFS/RPS and fill flow hash from HW */
+                       skb_record_rx_queue(skb, queue_to_rxid[queue_id]);
+                       if (netdev->features & NETIF_F_RXHASH) {
+                               hash_type = (rd->rrd5 >> EDMA_HASH_TYPE_SHIFT);
+                               if ((hash_type > EDMA_HASH_TYPE_START) && (hash_type < EDMA_HASH_TYPE_END))
+                                       skb_set_hash(skb, rd->rrd2, PKT_HASH_TYPE_L4);
+                       }
+
+#ifdef CONFIG_NF_FLOW_COOKIE
+                       skb->flow_cookie = rd->rrd3 & EDMA_RRD_FLOW_COOKIE_MASK;
+#endif
+                       edma_receive_checksum(rd, skb);
+
+                       /* Process VLAN HW acceleration indication provided by HW */
+                       if (unlikely(adapter->default_vlan_tag != rd->rrd4)) {
+                               vlan = rd->rrd4;
+                               if (likely(rd->rrd7 & EDMA_RRD_CVLAN))
+                                       __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan);
+                               else if (rd->rrd1 & EDMA_RRD_SVLAN)
+                                       __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), vlan);
+                       }
+
+                       /* Update rx statistics */
+                       adapter->stats.rx_packets++;
+                       adapter->stats.rx_bytes += length;
+
+                       /* Check if we reached refill threshold */
+                       if (cleaned_count == EDMA_RX_BUFFER_WRITE) {
+                               ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
+                               edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
+                                             sw_next_to_clean);
+                               cleaned_count = ret_count;
+                       }
+
+                       /* At this point skb should go to stack */
+                       napi_gro_receive(napi, skb);
+               }
+
+               /* Check if we still have NAPI budget */
+               if (!work_to_do)
+                       break;
+
+               /* Read index once again since we still have NAPI budget */
+               edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data);
+               hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) &
+                       EDMA_RFD_CONS_IDX_MASK;
+       } while (hw_next_to_clean != sw_next_to_clean);
+
+       erdr->sw_next_to_clean = sw_next_to_clean;
+
+       /* Refill here in case refill threshold wasn't reached */
+       if (likely(cleaned_count)) {
+               ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
+               if (ret_count)
+                       dev_dbg(&pdev->dev, "Not all buffers was reallocated");
+               edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
+                             erdr->sw_next_to_clean);
+       }
+}
+
+/* edma_delete_rfs_filter()
+ *     Remove RFS filter from switch
+ */
+static int edma_delete_rfs_filter(struct edma_adapter *adapter,
+                                struct edma_rfs_filter_node *filter_node)
+{
+       int res = -1;
+
+       struct flow_keys *keys = &filter_node->keys;
+
+       if (likely(adapter->set_rfs_rule))
+               res = (*adapter->set_rfs_rule)(adapter->netdev,
+                       flow_get_u32_src(keys), flow_get_u32_dst(keys),
+                       keys->ports.src, keys->ports.dst,
+                       keys->basic.ip_proto, filter_node->rq_id, 0);
+
+       return res;
+}
+
+/* edma_add_rfs_filter()
+ *     Add RFS filter to switch
+ */
+static int edma_add_rfs_filter(struct edma_adapter *adapter,
+                              struct flow_keys *keys, u16 rq,
+                              struct edma_rfs_filter_node *filter_node)
+{
+       int res = -1;
+
+       struct flow_keys *dest_keys = &filter_node->keys;
+
+       memcpy(dest_keys, &filter_node->keys, sizeof(*dest_keys));
+/*
+       dest_keys->control = keys->control;
+       dest_keys->basic = keys->basic;
+       dest_keys->addrs = keys->addrs;
+       dest_keys->ports = keys->ports;
+       dest_keys.ip_proto = keys->ip_proto;
+*/
+       /* Call callback registered by ESS driver */
+       if (likely(adapter->set_rfs_rule))
+               res = (*adapter->set_rfs_rule)(adapter->netdev, flow_get_u32_src(keys),
+                     flow_get_u32_dst(keys), keys->ports.src, keys->ports.dst,
+                     keys->basic.ip_proto, rq, 1);
+
+       return res;
+}
+
+/* edma_rfs_key_search()
+ *     Look for existing RFS entry
+ */
+static struct edma_rfs_filter_node *edma_rfs_key_search(struct hlist_head *h,
+                                                      struct flow_keys *key)
+{
+       struct edma_rfs_filter_node *p;
+
+       hlist_for_each_entry(p, h, node)
+               if (flow_get_u32_src(&p->keys) == flow_get_u32_src(key) &&
+                   flow_get_u32_dst(&p->keys) == flow_get_u32_dst(key) &&
+                   p->keys.ports.src == key->ports.src &&
+                   p->keys.ports.dst == key->ports.dst &&
+                   p->keys.basic.ip_proto == key->basic.ip_proto)
+                       return p;
+       return NULL;
+}
+
+/* edma_initialise_rfs_flow_table()
+ *     Initialise EDMA RFS flow table
+ */
+static void edma_initialise_rfs_flow_table(struct edma_adapter *adapter)
+{
+       int i;
+
+       spin_lock_init(&adapter->rfs.rfs_ftab_lock);
+
+       /* Initialize EDMA flow hash table */
+       for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++)
+               INIT_HLIST_HEAD(&adapter->rfs.hlist_head[i]);
+
+       adapter->rfs.max_num_filter = EDMA_RFS_FLOW_ENTRIES;
+       adapter->rfs.filter_available = adapter->rfs.max_num_filter;
+       adapter->rfs.hashtoclean = 0;
+
+       /* Add timer to get periodic RFS updates from OS */
+       timer_setup(&adapter->rfs.expire_rfs, edma_flow_may_expire, 0);
+       mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4);
+}
+
+/* edma_free_rfs_flow_table()
+ *     Free EDMA RFS flow table
+ */
+static void edma_free_rfs_flow_table(struct edma_adapter *adapter)
+{
+       int i;
+
+       /* Remove sync timer */
+       del_timer_sync(&adapter->rfs.expire_rfs);
+       spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
+
+       /* Free EDMA RFS table entries */
+       adapter->rfs.filter_available = 0;
+
+       /* Clean-up EDMA flow hash table */
+       for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++) {
+               struct hlist_head *hhead;
+               struct hlist_node *tmp;
+               struct edma_rfs_filter_node *filter_node;
+               int res;
+
+               hhead = &adapter->rfs.hlist_head[i];
+               hlist_for_each_entry_safe(filter_node, tmp, hhead, node) {
+                       res  = edma_delete_rfs_filter(adapter, filter_node);
+                       if (res < 0)
+                               dev_warn(&adapter->netdev->dev,
+                                       "EDMA going down but RFS entry %d not allowed to be flushed by Switch",
+                                       filter_node->flow_id);
+                       hlist_del(&filter_node->node);
+                       kfree(filter_node);
+               }
+       }
+       spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
+}
+
+/* edma_tx_unmap_and_free()
+ *     clean TX buffer
+ */
+static inline void edma_tx_unmap_and_free(struct platform_device *pdev,
+                                        struct edma_sw_desc *sw_desc)
+{
+       struct sk_buff *skb = sw_desc->skb;
+
+       if (likely((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD) ||
+                       (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAGLIST)))
+               /* unmap_single for skb head area */
+               dma_unmap_single(&pdev->dev, sw_desc->dma,
+                               sw_desc->length, DMA_TO_DEVICE);
+       else if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)
+               /* unmap page for paged fragments */
+               dma_unmap_page(&pdev->dev, sw_desc->dma,
+                             sw_desc->length, DMA_TO_DEVICE);
+
+       if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_LAST))
+               dev_kfree_skb_any(skb);
+
+       sw_desc->flags = 0;
+}
+
+/* edma_tx_complete()
+ *     Used to clean tx queues and update hardware and consumer index
+ */
+static void edma_tx_complete(struct edma_common_info *edma_cinfo, int queue_id)
+{
+       struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
+       struct edma_sw_desc *sw_desc;
+       struct platform_device *pdev = edma_cinfo->pdev;
+       int i;
+
+       u16 sw_next_to_clean = etdr->sw_next_to_clean;
+       u16 hw_next_to_clean;
+       u32 data = 0;
+
+       edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &data);
+       hw_next_to_clean = (data >> EDMA_TPD_CONS_IDX_SHIFT) & EDMA_TPD_CONS_IDX_MASK;
+
+       /* clean the buffer here */
+       while (sw_next_to_clean != hw_next_to_clean) {
+               sw_desc = &etdr->sw_desc[sw_next_to_clean];
+               edma_tx_unmap_and_free(pdev, sw_desc);
+               sw_next_to_clean = (sw_next_to_clean + 1) & (etdr->count - 1);
+       }
+
+       etdr->sw_next_to_clean = sw_next_to_clean;
+
+       /* update the TPD consumer index register */
+       edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(queue_id), sw_next_to_clean);
+
+       /* Wake the queue if queue is stopped and netdev link is up */
+       for (i = 0; i < EDMA_MAX_NETDEV_PER_QUEUE && etdr->nq[i] ; i++) {
+               if (netif_tx_queue_stopped(etdr->nq[i])) {
+                       if ((etdr->netdev[i]) && netif_carrier_ok(etdr->netdev[i]))
+                               netif_tx_wake_queue(etdr->nq[i]);
+               }
+       }
+}
+
+/* edma_get_tx_buffer()
+ *     Get sw_desc corresponding to the TPD
+ */
+static struct edma_sw_desc *edma_get_tx_buffer(struct edma_common_info *edma_cinfo,
+                                              struct edma_tx_desc *tpd, int queue_id)
+{
+       struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
+       return &etdr->sw_desc[tpd - (struct edma_tx_desc *)etdr->hw_desc];
+}
+
+/* edma_get_next_tpd()
+ *     Return a TPD descriptor for transfer
+ */
+static struct edma_tx_desc *edma_get_next_tpd(struct edma_common_info *edma_cinfo,
+                                            int queue_id)
+{
+       struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
+       u16 sw_next_to_fill = etdr->sw_next_to_fill;
+       struct edma_tx_desc *tpd_desc =
+               (&((struct edma_tx_desc *)(etdr->hw_desc))[sw_next_to_fill]);
+
+       etdr->sw_next_to_fill = (etdr->sw_next_to_fill + 1) & (etdr->count - 1);
+
+       return tpd_desc;
+}
+
+/* edma_tpd_available()
+ *     Check number of free TPDs
+ */
+static inline u16 edma_tpd_available(struct edma_common_info *edma_cinfo,
+                                   int queue_id)
+{
+       struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
+
+       u16 sw_next_to_fill;
+       u16 sw_next_to_clean;
+       u16 count = 0;
+
+       sw_next_to_clean = etdr->sw_next_to_clean;
+       sw_next_to_fill = etdr->sw_next_to_fill;
+
+       if (likely(sw_next_to_clean <= sw_next_to_fill))
+               count = etdr->count;
+
+       return count + sw_next_to_clean - sw_next_to_fill - 1;
+}
+
+/* edma_tx_queue_get()
+ *     Get the starting number of  the queue
+ */
+static inline int edma_tx_queue_get(struct edma_adapter *adapter,
+                                  struct sk_buff *skb, int txq_id)
+{
+       /* skb->priority is used as an index to skb priority table
+        * and based on packet priority, correspong queue is assigned.
+        */
+       return adapter->tx_start_offset[txq_id] + edma_skb_priority_offset(skb);
+}
+
+/* edma_tx_update_hw_idx()
+ *     update the producer index for the ring transmitted
+ */
+static void edma_tx_update_hw_idx(struct edma_common_info *edma_cinfo,
+                                struct sk_buff *skb, int queue_id)
+{
+       struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
+       u32 tpd_idx_data;
+
+       /* Read and update the producer index */
+       edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &tpd_idx_data);
+       tpd_idx_data &= ~EDMA_TPD_PROD_IDX_BITS;
+       tpd_idx_data |= (etdr->sw_next_to_fill & EDMA_TPD_PROD_IDX_MASK)
+               << EDMA_TPD_PROD_IDX_SHIFT;
+
+       edma_write_reg(EDMA_REG_TPD_IDX_Q(queue_id), tpd_idx_data);
+}
+
+/* edma_rollback_tx()
+ *     Function to retrieve tx resources in case of error
+ */
+static void edma_rollback_tx(struct edma_adapter *adapter,
+                           struct edma_tx_desc *start_tpd, int queue_id)
+{
+       struct edma_tx_desc_ring *etdr = adapter->edma_cinfo->tpd_ring[queue_id];
+       struct edma_sw_desc *sw_desc;
+       struct edma_tx_desc *tpd = NULL;
+       u16 start_index, index;
+
+       start_index = start_tpd - (struct edma_tx_desc *)(etdr->hw_desc);
+
+       index = start_index;
+       while (index != etdr->sw_next_to_fill) {
+               tpd = (&((struct edma_tx_desc *)(etdr->hw_desc))[index]);
+               sw_desc = &etdr->sw_desc[index];
+               edma_tx_unmap_and_free(adapter->pdev, sw_desc);
+               memset(tpd, 0, sizeof(struct edma_tx_desc));
+               if (++index == etdr->count)
+                       index = 0;
+       }
+       etdr->sw_next_to_fill = start_index;
+}
+
+/* edma_tx_map_and_fill()
+ *     gets called from edma_xmit_frame
+ *
+ * This is where the dma of the buffer to be transmitted
+ * gets mapped
+ */
+static int edma_tx_map_and_fill(struct edma_common_info *edma_cinfo,
+                              struct edma_adapter *adapter, struct sk_buff *skb, int queue_id,
+                              unsigned int flags_transmit, u16 from_cpu, u16 dp_bitmap,
+                              bool packet_is_rstp, int nr_frags)
+{
+       struct edma_sw_desc *sw_desc = NULL;
+       struct platform_device *pdev = edma_cinfo->pdev;
+       struct edma_tx_desc *tpd = NULL, *start_tpd = NULL;
+       struct sk_buff *iter_skb;
+       int i = 0;
+       u32 word1 = 0, word3 = 0, lso_word1 = 0, svlan_tag = 0;
+       u16 buf_len, lso_desc_len = 0;
+
+       /* It should either be a nr_frags skb or fraglist skb but not both */
+       BUG_ON(nr_frags && skb_has_frag_list(skb));
+
+       if (skb_is_gso(skb)) {
+               /* TODO: What additional checks need to be performed here */
+               if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) {
+                       lso_word1 |= EDMA_TPD_IPV4_EN;
+                       ip_hdr(skb)->check = 0;
+                       tcp_hdr(skb)->check = ~csum_tcpudp_magic(ip_hdr(skb)->saddr,
+                               ip_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
+               } else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) {
+                       lso_word1 |= EDMA_TPD_LSO_V2_EN;
+                       ipv6_hdr(skb)->payload_len = 0;
+                       tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+                               &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
+               } else
+                       return -EINVAL;
+
+               lso_word1 |= EDMA_TPD_LSO_EN | ((skb_shinfo(skb)->gso_size & EDMA_TPD_MSS_MASK) << EDMA_TPD_MSS_SHIFT) |
+                               (skb_transport_offset(skb) << EDMA_TPD_HDR_SHIFT);
+       } else if (flags_transmit & EDMA_HW_CHECKSUM) {
+                       u8 css, cso;
+                       cso = skb_checksum_start_offset(skb);
+                       css = cso  + skb->csum_offset;
+
+                       word1 |= (EDMA_TPD_CUSTOM_CSUM_EN);
+                       word1 |= (cso >> 1) << EDMA_TPD_HDR_SHIFT;
+                       word1 |= ((css >> 1) << EDMA_TPD_CUSTOM_CSUM_SHIFT);
+       }
+
+       if (skb->protocol == htons(ETH_P_PPP_SES))
+               word1 |= EDMA_TPD_PPPOE_EN;
+
+       if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_FLAG) {
+               switch(skb->vlan_proto) {
+               case htons(ETH_P_8021Q):
+                       word3 |= (1 << EDMA_TX_INS_CVLAN);
+                       word3 |= skb_vlan_tag_get(skb) << EDMA_TX_CVLAN_TAG_SHIFT;
+                       break;
+               case htons(ETH_P_8021AD):
+                       word1 |= (1 << EDMA_TX_INS_SVLAN);
+                       svlan_tag = skb_vlan_tag_get(skb) << EDMA_TX_SVLAN_TAG_SHIFT;
+                       break;
+               default:
+                       dev_err(&pdev->dev, "no ctag or stag present\n");
+                       goto vlan_tag_error;
+               }
+       } else if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG) {
+               word3 |= (1 << EDMA_TX_INS_CVLAN);
+               word3 |= (adapter->default_vlan_tag) << EDMA_TX_CVLAN_TAG_SHIFT;
+       }
+
+       if (packet_is_rstp) {
+               word3 |= dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT;
+               word3 |= from_cpu << EDMA_TPD_FROM_CPU_SHIFT;
+       } else {
+               word3 |= adapter->dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT;
+       }
+
+       buf_len = skb_headlen(skb);
+
+       if (lso_word1) {
+               if (lso_word1 & EDMA_TPD_LSO_V2_EN) {
+
+                       /* IPv6 LSOv2 descriptor */
+                       start_tpd = tpd = edma_get_next_tpd(edma_cinfo, queue_id);
+                       sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
+                       sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_NONE;
+
+                       /* LSOv2 descriptor overrides addr field to pass length */
+                       tpd->addr = cpu_to_le16(skb->len);
+                       tpd->svlan_tag = svlan_tag;
+                       tpd->word1 = word1 | lso_word1;
+                       tpd->word3 = word3;
+               }
+
+               tpd = edma_get_next_tpd(edma_cinfo, queue_id);
+               if (!start_tpd)
+                       start_tpd = tpd;
+               sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
+
+               /* The last buffer info contain the skb address,
+                * so skb will be freed after unmap
+                */
+               sw_desc->length = lso_desc_len;
+               sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
+
+               sw_desc->dma = dma_map_single(&adapter->pdev->dev,
+                                       skb->data, buf_len, DMA_TO_DEVICE);
+               if (dma_mapping_error(&pdev->dev, sw_desc->dma))
+                       goto dma_error;
+
+               tpd->addr = cpu_to_le32(sw_desc->dma);
+               tpd->len  = cpu_to_le16(buf_len);
+
+               tpd->svlan_tag = svlan_tag;
+               tpd->word1 = word1 | lso_word1;
+               tpd->word3 = word3;
+
+               /* The last buffer info contain the skb address,
+                * so it will be freed after unmap
+                */
+               sw_desc->length = lso_desc_len;
+               sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
+
+               buf_len = 0;
+       }
+
+       if (likely(buf_len)) {
+
+               /* TODO Do not dequeue descriptor if there is a potential error */
+               tpd = edma_get_next_tpd(edma_cinfo, queue_id);
+
+               if (!start_tpd)
+                       start_tpd = tpd;
+
+               sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
+
+               /* The last buffer info contain the skb address,
+                * so it will be free after unmap
+                */
+               sw_desc->length = buf_len;
+               sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
+               sw_desc->dma = dma_map_single(&adapter->pdev->dev,
+                       skb->data, buf_len, DMA_TO_DEVICE);
+               if (dma_mapping_error(&pdev->dev, sw_desc->dma))
+                       goto dma_error;
+
+               tpd->addr = cpu_to_le32(sw_desc->dma);
+               tpd->len  = cpu_to_le16(buf_len);
+
+               tpd->svlan_tag = svlan_tag;
+               tpd->word1 = word1 | lso_word1;
+               tpd->word3 = word3;
+       }
+
+       /* Walk through all paged fragments */
+       while (nr_frags--) {
+               skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+               buf_len = skb_frag_size(frag);
+               tpd = edma_get_next_tpd(edma_cinfo, queue_id);
+               sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
+               sw_desc->length = buf_len;
+               sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAG;
+
+               sw_desc->dma = skb_frag_dma_map(&pdev->dev, frag, 0, buf_len, DMA_TO_DEVICE);
+
+               if (dma_mapping_error(NULL, sw_desc->dma))
+                       goto dma_error;
+
+               tpd->addr = cpu_to_le32(sw_desc->dma);
+               tpd->len  = cpu_to_le16(buf_len);
+
+               tpd->svlan_tag = svlan_tag;
+               tpd->word1 = word1 | lso_word1;
+               tpd->word3 = word3;
+               i++;
+       }
+
+       /* Walk through all fraglist skbs */
+       skb_walk_frags(skb, iter_skb) {
+               buf_len = iter_skb->len;
+               tpd = edma_get_next_tpd(edma_cinfo, queue_id);
+               sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
+               sw_desc->length = buf_len;
+               sw_desc->dma =  dma_map_single(&adapter->pdev->dev,
+                               iter_skb->data, buf_len, DMA_TO_DEVICE);
+
+               if (dma_mapping_error(NULL, sw_desc->dma))
+                       goto dma_error;
+
+               tpd->addr = cpu_to_le32(sw_desc->dma);
+               tpd->len  = cpu_to_le16(buf_len);
+               tpd->svlan_tag = svlan_tag;
+               tpd->word1 = word1 | lso_word1;
+               tpd->word3 = word3;
+               sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAGLIST;
+       }
+
+       if (tpd)
+               tpd->word1 |= 1 << EDMA_TPD_EOP_SHIFT;
+
+       sw_desc->skb = skb;
+       sw_desc->flags |= EDMA_SW_DESC_FLAG_LAST;
+
+       return 0;
+
+dma_error:
+       edma_rollback_tx(adapter, start_tpd, queue_id);
+       dev_err(&pdev->dev, "TX DMA map failed\n");
+vlan_tag_error:
+       return -ENOMEM;
+}
+
+/* edma_check_link()
+ *     check Link status
+ */
+static int edma_check_link(struct edma_adapter *adapter)
+{
+       struct phy_device *phydev = adapter->phydev;
+
+       if (!(adapter->poll_required))
+               return __EDMA_LINKUP;
+
+       if (phydev->link)
+               return __EDMA_LINKUP;
+
+       return __EDMA_LINKDOWN;
+}
+
+/* edma_adjust_link()
+ *     check for edma link status
+ */
+void edma_adjust_link(struct net_device *netdev)
+{
+       int status;
+       struct edma_adapter *adapter = netdev_priv(netdev);
+       struct phy_device *phydev = adapter->phydev;
+
+       if (!test_bit(__EDMA_UP, &adapter->state_flags))
+               return;
+
+       status = edma_check_link(adapter);
+
+       if (status == __EDMA_LINKUP && adapter->link_state == __EDMA_LINKDOWN) {
+               dev_info(&adapter->pdev->dev, "%s: GMAC Link is up with phy_speed=%d\n", netdev->name, phydev->speed);
+               adapter->link_state = __EDMA_LINKUP;
+               netif_carrier_on(netdev);
+               if (netif_running(netdev))
+                       netif_tx_wake_all_queues(netdev);
+       } else if (status == __EDMA_LINKDOWN && adapter->link_state == __EDMA_LINKUP) {
+               dev_info(&adapter->pdev->dev, "%s: GMAC Link is down\n", netdev->name);
+               adapter->link_state = __EDMA_LINKDOWN;
+               netif_carrier_off(netdev);
+               netif_tx_stop_all_queues(netdev);
+       }
+}
+
+/* edma_get_stats()
+ *     Statistics api used to retreive the tx/rx statistics
+ */
+struct net_device_stats *edma_get_stats(struct net_device *netdev)
+{
+       struct edma_adapter *adapter = netdev_priv(netdev);
+
+       return &adapter->stats;
+}
+
+/* edma_xmit()
+ *     Main api to be called by the core for packet transmission
+ */
+netdev_tx_t edma_xmit(struct sk_buff *skb,
+                    struct net_device *net_dev)
+{
+       struct edma_adapter *adapter = netdev_priv(net_dev);
+       struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
+       struct edma_tx_desc_ring *etdr;
+       u16 from_cpu, dp_bitmap, txq_id;
+       int ret, nr_frags = 0, num_tpds_needed = 1, queue_id;
+       unsigned int flags_transmit = 0;
+       bool packet_is_rstp = false;
+       struct netdev_queue *nq = NULL;
+
+       if (skb_shinfo(skb)->nr_frags) {
+               nr_frags = skb_shinfo(skb)->nr_frags;
+               num_tpds_needed += nr_frags;
+       } else if (skb_has_frag_list(skb)) {
+               struct sk_buff *iter_skb;
+
+               skb_walk_frags(skb, iter_skb)
+                       num_tpds_needed++;
+       }
+
+       if (num_tpds_needed > EDMA_MAX_SKB_FRAGS) {
+               dev_err(&net_dev->dev,
+                       "skb received with fragments %d which is more than %lu",
+                       num_tpds_needed, EDMA_MAX_SKB_FRAGS);
+               dev_kfree_skb_any(skb);
+               adapter->stats.tx_errors++;
+               return NETDEV_TX_OK;
+       }
+
+       if (edma_stp_rstp) {
+               u16 ath_hdr, ath_eth_type;
+               u8 mac_addr[EDMA_ETH_HDR_LEN];
+               ath_eth_type = ntohs(*(uint16_t *)&skb->data[12]);
+               if (ath_eth_type == edma_ath_eth_type) {
+                       packet_is_rstp = true;
+                       ath_hdr = htons(*(uint16_t *)&skb->data[14]);
+                       dp_bitmap = ath_hdr & EDMA_TX_ATH_HDR_PORT_BITMAP_MASK;
+                       from_cpu = (ath_hdr & EDMA_TX_ATH_HDR_FROM_CPU_MASK) >> EDMA_TX_ATH_HDR_FROM_CPU_SHIFT;
+                       memcpy(mac_addr, skb->data, EDMA_ETH_HDR_LEN);
+
+                       skb_pull(skb, 4);
+
+                       memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN);
+               }
+       }
+
+       /* this will be one of the 4 TX queues exposed to linux kernel */
+       txq_id = skb_get_queue_mapping(skb);
+       queue_id = edma_tx_queue_get(adapter, skb, txq_id);
+       etdr = edma_cinfo->tpd_ring[queue_id];
+       nq = netdev_get_tx_queue(net_dev, txq_id);
+
+       local_bh_disable();
+       /* Tx is not handled in bottom half context. Hence, we need to protect
+        * Tx from tasks and bottom half
+        */
+
+       if (num_tpds_needed > edma_tpd_available(edma_cinfo, queue_id)) {
+               /* not enough descriptor, just stop queue */
+               netif_tx_stop_queue(nq);
+               local_bh_enable();
+               dev_dbg(&net_dev->dev, "Not enough descriptors available");
+               edma_cinfo->edma_ethstats.tx_desc_error++;
+               return NETDEV_TX_BUSY;
+       }
+
+       /* Check and mark VLAN tag offload */
+       if (skb_vlan_tag_present(skb))
+               flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG;
+       else if (adapter->default_vlan_tag)
+               flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG;
+
+       /* Check and mark checksum offload */
+       if (likely(skb->ip_summed == CHECKSUM_PARTIAL))
+               flags_transmit |= EDMA_HW_CHECKSUM;
+
+       /* Map and fill descriptor for Tx */
+       ret = edma_tx_map_and_fill(edma_cinfo, adapter, skb, queue_id,
+               flags_transmit, from_cpu, dp_bitmap, packet_is_rstp, nr_frags);
+       if (ret) {
+               dev_kfree_skb_any(skb);
+               adapter->stats.tx_errors++;
+               goto netdev_okay;
+       }
+
+       /* Update SW producer index */
+       edma_tx_update_hw_idx(edma_cinfo, skb, queue_id);
+
+       /* update tx statistics */
+       adapter->stats.tx_packets++;
+       adapter->stats.tx_bytes += skb->len;
+
+netdev_okay:
+       local_bh_enable();
+       return NETDEV_TX_OK;
+}
+
+/*
+ * edma_flow_may_expire()
+ *     Timer function called periodically to delete the node
+ */
+void edma_flow_may_expire(struct timer_list *t)
+{
+       struct edma_rfs_flow_table *table = from_timer(table, t, expire_rfs);
+       struct edma_adapter *adapter =
+               container_of(table, typeof(*adapter), rfs);
+       int j;
+
+       spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
+       for (j = 0; j < EDMA_RFS_EXPIRE_COUNT_PER_CALL; j++) {
+               struct hlist_head *hhead;
+               struct hlist_node *tmp;
+               struct edma_rfs_filter_node *n;
+               bool res;
+
+               hhead = &adapter->rfs.hlist_head[adapter->rfs.hashtoclean++];
+               hlist_for_each_entry_safe(n, tmp, hhead, node) {
+                       res = rps_may_expire_flow(adapter->netdev, n->rq_id,
+                                       n->flow_id, n->filter_id);
+                       if (res) {
+                               int ret;
+                               ret = edma_delete_rfs_filter(adapter, n);
+                               if (ret < 0)
+                                       dev_dbg(&adapter->netdev->dev,
+                                                       "RFS entry %d not allowed to be flushed by Switch",
+                                                       n->flow_id);
+                               else {
+                                       hlist_del(&n->node);
+                                       kfree(n);
+                                       adapter->rfs.filter_available++;
+                               }
+                       }
+               }
+       }
+
+       adapter->rfs.hashtoclean = adapter->rfs.hashtoclean & (EDMA_RFS_FLOW_ENTRIES - 1);
+       spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
+       mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4);
+}
+
+/* edma_rx_flow_steer()
+ *     Called by core to to steer the flow to CPU
+ */
+int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
+                      u16 rxq, u32 flow_id)
+{
+       struct flow_keys keys;
+       struct edma_rfs_filter_node *filter_node;
+       struct edma_adapter *adapter = netdev_priv(dev);
+       u16 hash_tblid;
+       int res;
+
+       if (skb->protocol == htons(ETH_P_IPV6)) {
+               dev_err(&adapter->pdev->dev, "IPv6 not supported\n");
+               res = -EINVAL;
+               goto no_protocol_err;
+       }
+
+       /* Dissect flow parameters
+        * We only support IPv4 + TCP/UDP
+        */
+       res = skb_flow_dissect_flow_keys(skb, &keys, 0);
+       if (!((keys.basic.ip_proto == IPPROTO_TCP) || (keys.basic.ip_proto == IPPROTO_UDP))) {
+               res = -EPROTONOSUPPORT;
+               goto no_protocol_err;
+       }
+
+       /* Check if table entry exists */
+       hash_tblid = skb_get_hash_raw(skb) & EDMA_RFS_FLOW_ENTRIES_MASK;
+
+       spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
+       filter_node = edma_rfs_key_search(&adapter->rfs.hlist_head[hash_tblid], &keys);
+
+       if (filter_node) {
+               if (rxq == filter_node->rq_id) {
+                       res = -EEXIST;
+                       goto out;
+               } else {
+                       res = edma_delete_rfs_filter(adapter, filter_node);
+                       if (res < 0)
+                               dev_warn(&adapter->netdev->dev,
+                                               "Cannot steer flow %d to different queue",
+                                               filter_node->flow_id);
+                       else {
+                               adapter->rfs.filter_available++;
+                               res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node);
+                               if (res < 0) {
+                                       dev_warn(&adapter->netdev->dev,
+                                                       "Cannot steer flow %d to different queue",
+                                                       filter_node->flow_id);
+                               } else {
+                                       adapter->rfs.filter_available--;
+                                       filter_node->rq_id = rxq;
+                                       filter_node->filter_id = res;
+                               }
+                       }
+               }
+       } else {
+               if (adapter->rfs.filter_available == 0) {
+                       res = -EBUSY;
+                       goto out;
+               }
+
+               filter_node = kmalloc(sizeof(*filter_node), GFP_ATOMIC);
+               if (!filter_node) {
+                       res = -ENOMEM;
+                       goto out;
+               }
+
+               res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node);
+               if (res < 0) {
+                       kfree(filter_node);
+                       goto out;
+               }
+
+               adapter->rfs.filter_available--;
+               filter_node->rq_id = rxq;
+               filter_node->filter_id = res;
+               filter_node->flow_id = flow_id;
+               filter_node->keys = keys;
+               INIT_HLIST_NODE(&filter_node->node);
+               hlist_add_head(&filter_node->node, &adapter->rfs.hlist_head[hash_tblid]);
+       }
+
+out:
+       spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
+no_protocol_err:
+       return res;
+}
+
+/* edma_register_rfs_filter()
+ *     Add RFS filter callback
+ */
+int edma_register_rfs_filter(struct net_device *netdev,
+                           set_rfs_filter_callback_t set_filter)
+{
+       struct edma_adapter *adapter = netdev_priv(netdev);
+
+       spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
+
+       if (adapter->set_rfs_rule) {
+               spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
+               return -1;
+       }
+
+       adapter->set_rfs_rule = set_filter;
+       spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
+
+       return 0;
+}
+
+/* edma_alloc_tx_rings()
+ *     Allocate rx rings
+ */
+int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo)
+{
+       struct platform_device *pdev = edma_cinfo->pdev;
+       int i, err = 0;
+
+       for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
+               err = edma_alloc_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]);
+               if (err) {
+                       dev_err(&pdev->dev, "Tx Queue alloc %u failed\n", i);
+                       return err;
+               }
+       }
+
+       return 0;
+}
+
+/* edma_free_tx_rings()
+ *     Free tx rings
+ */
+void edma_free_tx_rings(struct edma_common_info *edma_cinfo)
+{
+       int i;
+
+       for (i = 0; i < edma_cinfo->num_tx_queues; i++)
+               edma_free_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]);
+}
+
+/* edma_free_tx_resources()
+ *     Free buffers associated with tx rings
+ */
+void edma_free_tx_resources(struct edma_common_info *edma_cinfo)
+{
+       struct edma_tx_desc_ring *etdr;
+       struct edma_sw_desc *sw_desc;
+       struct platform_device *pdev = edma_cinfo->pdev;
+       int i, j;
+
+       for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
+               etdr = edma_cinfo->tpd_ring[i];
+               for (j = 0; j < EDMA_TX_RING_SIZE; j++) {
+                       sw_desc = &etdr->sw_desc[j];
+                       if (sw_desc->flags & (EDMA_SW_DESC_FLAG_SKB_HEAD |
+                               EDMA_SW_DESC_FLAG_SKB_FRAG | EDMA_SW_DESC_FLAG_SKB_FRAGLIST))
+                               edma_tx_unmap_and_free(pdev, sw_desc);
+               }
+       }
+}
+
+/* edma_alloc_rx_rings()
+ *     Allocate rx rings
+ */
+int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo)
+{
+       struct platform_device *pdev = edma_cinfo->pdev;
+       int i, j, err = 0;
+
+       for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
+               err = edma_alloc_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]);
+               if (err) {
+                       dev_err(&pdev->dev, "Rx Queue alloc%u failed\n", i);
+                       return err;
+               }
+               j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
+       }
+
+       return 0;
+}
+
+/* edma_free_rx_rings()
+ *     free rx rings
+ */
+void edma_free_rx_rings(struct edma_common_info *edma_cinfo)
+{
+       int i, j;
+
+       for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
+               edma_free_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]);
+               j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
+       }
+}
+
+/* edma_free_queues()
+ *     Free the queues allocaated
+ */
+void edma_free_queues(struct edma_common_info *edma_cinfo)
+{
+       int i , j;
+
+       for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
+               if (edma_cinfo->tpd_ring[i])
+                       kfree(edma_cinfo->tpd_ring[i]);
+               edma_cinfo->tpd_ring[i] = NULL;
+       }
+
+       for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
+               if (edma_cinfo->rfd_ring[j])
+                       kfree(edma_cinfo->rfd_ring[j]);
+               edma_cinfo->rfd_ring[j] = NULL;
+               j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
+       }
+
+       edma_cinfo->num_rx_queues = 0;
+       edma_cinfo->num_tx_queues = 0;
+
+       return;
+}
+
+/* edma_free_rx_resources()
+ *     Free buffers associated with tx rings
+ */
+void edma_free_rx_resources(struct edma_common_info *edma_cinfo)
+{
+        struct edma_rfd_desc_ring *erdr;
+       struct edma_sw_desc *sw_desc;
+       struct platform_device *pdev = edma_cinfo->pdev;
+       int i, j, k;
+
+       for (i = 0, k = 0; i < edma_cinfo->num_rx_queues; i++) {
+               erdr = edma_cinfo->rfd_ring[k];
+               for (j = 0; j < EDMA_RX_RING_SIZE; j++) {
+                       sw_desc = &erdr->sw_desc[j];
+                       if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD)) {
+                               dma_unmap_single(&pdev->dev, sw_desc->dma,
+                                       sw_desc->length, DMA_FROM_DEVICE);
+                               edma_clean_rfd(erdr, j);
+                       } else if ((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)) {
+                               dma_unmap_page(&pdev->dev, sw_desc->dma,
+                                       sw_desc->length, DMA_FROM_DEVICE);
+                               edma_clean_rfd(erdr, j);
+                       }
+               }
+               k += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
+
+       }
+}
+
+/* edma_alloc_queues_tx()
+ *     Allocate memory for all rings
+ */
+int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo)
+{
+       int i;
+
+       for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
+               struct edma_tx_desc_ring *etdr;
+               etdr = kzalloc(sizeof(struct edma_tx_desc_ring), GFP_KERNEL);
+               if (!etdr)
+                       goto err;
+               etdr->count = edma_cinfo->tx_ring_count;
+               edma_cinfo->tpd_ring[i] = etdr;
+       }
+
+       return 0;
+err:
+       edma_free_queues(edma_cinfo);
+       return -1;
+}
+
+/* edma_alloc_queues_rx()
+ *     Allocate memory for all rings
+ */
+int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo)
+{
+       int i, j;
+
+       for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
+               struct edma_rfd_desc_ring *rfd_ring;
+               rfd_ring = kzalloc(sizeof(struct edma_rfd_desc_ring),
+                               GFP_KERNEL);
+               if (!rfd_ring)
+                       goto err;
+               rfd_ring->count = edma_cinfo->rx_ring_count;
+               edma_cinfo->rfd_ring[j] = rfd_ring;
+               j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
+       }
+       return 0;
+err:
+       edma_free_queues(edma_cinfo);
+       return -1;
+}
+
+/* edma_clear_irq_status()
+ *     Clear interrupt status
+ */
+void edma_clear_irq_status()
+{
+       edma_write_reg(EDMA_REG_RX_ISR, 0xff);
+       edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
+       edma_write_reg(EDMA_REG_MISC_ISR, 0x1fff);
+       edma_write_reg(EDMA_REG_WOL_ISR, 0x1);
+};
+
+/* edma_configure()
+ *     Configure skb, edma interrupts and control register.
+ */
+int edma_configure(struct edma_common_info *edma_cinfo)
+{
+       struct edma_hw *hw = &edma_cinfo->hw;
+       u32 intr_modrt_data;
+       u32 intr_ctrl_data = 0;
+       int i, j, ret_count;
+
+       edma_read_reg(EDMA_REG_INTR_CTRL, &intr_ctrl_data);
+       intr_ctrl_data &= ~(1 << EDMA_INTR_SW_IDX_W_TYP_SHIFT);
+       intr_ctrl_data |= hw->intr_sw_idx_w << EDMA_INTR_SW_IDX_W_TYP_SHIFT;
+       edma_write_reg(EDMA_REG_INTR_CTRL, intr_ctrl_data);
+
+       edma_clear_irq_status();
+
+       /* Clear any WOL status */
+       edma_write_reg(EDMA_REG_WOL_CTRL, 0);
+       intr_modrt_data = (EDMA_TX_IMT << EDMA_IRQ_MODRT_TX_TIMER_SHIFT);
+       intr_modrt_data |= (EDMA_RX_IMT << EDMA_IRQ_MODRT_RX_TIMER_SHIFT);
+       edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data);
+       edma_configure_tx(edma_cinfo);
+       edma_configure_rx(edma_cinfo);
+
+       /* Allocate the RX buffer */
+       for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
+               struct edma_rfd_desc_ring *ring = edma_cinfo->rfd_ring[j];
+               ret_count = edma_alloc_rx_buf(edma_cinfo, ring, ring->count, j);
+               if (ret_count) {
+                       dev_dbg(&edma_cinfo->pdev->dev, "not all rx buffers allocated\n");
+               }
+               j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
+       }
+
+       /* Configure descriptor Ring */
+       edma_init_desc(edma_cinfo);
+       return 0;
+}
+
+/* edma_irq_enable()
+ *     Enable default interrupt generation settings
+ */
+void edma_irq_enable(struct edma_common_info *edma_cinfo)
+{
+       struct edma_hw *hw = &edma_cinfo->hw;
+       int i, j;
+
+       edma_write_reg(EDMA_REG_RX_ISR, 0xff);
+       for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
+               edma_write_reg(EDMA_REG_RX_INT_MASK_Q(j), hw->rx_intr_mask);
+               j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
+       }
+       edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
+       for (i = 0; i < edma_cinfo->num_tx_queues; i++)
+               edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), hw->tx_intr_mask);
+}
+
+/* edma_irq_disable()
+ *     Disable Interrupt
+ */
+void edma_irq_disable(struct edma_common_info *edma_cinfo)
+{
+       int i;
+
+       for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++)
+               edma_write_reg(EDMA_REG_RX_INT_MASK_Q(i), 0x0);
+
+       for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++)
+               edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), 0x0);
+       edma_write_reg(EDMA_REG_MISC_IMR, 0);
+       edma_write_reg(EDMA_REG_WOL_IMR, 0);
+}
+
+/* edma_free_irqs()
+ *     Free All IRQs
+ */
+void edma_free_irqs(struct edma_adapter *adapter)
+{
+       struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
+       int i, j;
+       int k = ((edma_cinfo->num_rx_queues == 4) ? 1 : 2);
+
+       for (i = 0; i < CONFIG_NR_CPUS; i++) {
+               for (j = edma_cinfo->edma_percpu_info[i].tx_start; j < (edma_cinfo->edma_percpu_info[i].tx_start + 4); j++)
+                       free_irq(edma_cinfo->tx_irq[j], &edma_cinfo->edma_percpu_info[i]);
+
+               for (j = edma_cinfo->edma_percpu_info[i].rx_start; j < (edma_cinfo->edma_percpu_info[i].rx_start + k); j++)
+                       free_irq(edma_cinfo->rx_irq[j], &edma_cinfo->edma_percpu_info[i]);
+       }
+}
+
+/* edma_enable_rx_ctrl()
+ *     Enable RX queue control
+ */
+void edma_enable_rx_ctrl(struct edma_hw *hw)
+{
+       u32 data;
+
+       edma_read_reg(EDMA_REG_RXQ_CTRL, &data);
+       data |= EDMA_RXQ_CTRL_EN;
+       edma_write_reg(EDMA_REG_RXQ_CTRL, data);
+}
+
+
+/* edma_enable_tx_ctrl()
+ *     Enable TX queue control
+ */
+void edma_enable_tx_ctrl(struct edma_hw *hw)
+{
+       u32 data;
+
+       edma_read_reg(EDMA_REG_TXQ_CTRL, &data);
+       data |= EDMA_TXQ_CTRL_TXQ_EN;
+       edma_write_reg(EDMA_REG_TXQ_CTRL, data);
+}
+
+/* edma_stop_rx_tx()
+ *     Disable RX/TQ Queue control
+ */
+void edma_stop_rx_tx(struct edma_hw *hw)
+{
+       u32 data;
+
+       edma_read_reg(EDMA_REG_RXQ_CTRL, &data);
+       data &= ~EDMA_RXQ_CTRL_EN;
+       edma_write_reg(EDMA_REG_RXQ_CTRL, data);
+       edma_read_reg(EDMA_REG_TXQ_CTRL, &data);
+       data &= ~EDMA_TXQ_CTRL_TXQ_EN;
+       edma_write_reg(EDMA_REG_TXQ_CTRL, data);
+}
+
+/* edma_reset()
+ *     Reset the EDMA
+ */
+int edma_reset(struct edma_common_info *edma_cinfo)
+{
+       struct edma_hw *hw = &edma_cinfo->hw;
+
+       edma_irq_disable(edma_cinfo);
+
+       edma_clear_irq_status();
+
+       edma_stop_rx_tx(hw);
+
+       return 0;
+}
+
+/* edma_fill_netdev()
+ *     Fill netdev for each etdr
+ */
+int edma_fill_netdev(struct edma_common_info *edma_cinfo, int queue_id,
+                   int dev, int txq_id)
+{
+       struct edma_tx_desc_ring *etdr;
+       int i = 0;
+
+       etdr = edma_cinfo->tpd_ring[queue_id];
+
+       while (etdr->netdev[i])
+               i++;
+
+       if (i >= EDMA_MAX_NETDEV_PER_QUEUE)
+               return -1;
+
+       /* Populate the netdev associated with the tpd ring */
+       etdr->netdev[i] = edma_netdev[dev];
+       etdr->nq[i] = netdev_get_tx_queue(edma_netdev[dev], txq_id);
+
+       return 0;
+}
+
+/* edma_set_mac()
+ *     Change the Ethernet Address of the NIC
+ */
+int edma_set_mac_addr(struct net_device *netdev, void *p)
+{
+       struct sockaddr *addr = p;
+
+       if (!is_valid_ether_addr(addr->sa_data))
+               return -EINVAL;
+
+       if (netif_running(netdev))
+               return -EBUSY;
+
+       memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+       return 0;
+}
+
+/* edma_set_stp_rstp()
+ *     set stp/rstp
+ */
+void edma_set_stp_rstp(bool rstp)
+{
+       edma_stp_rstp = rstp;
+}
+
+/* edma_assign_ath_hdr_type()
+ *     assign atheros header eth type
+ */
+void edma_assign_ath_hdr_type(int eth_type)
+{
+       edma_ath_eth_type = eth_type & EDMA_ETH_TYPE_MASK;
+}
+
+/* edma_get_default_vlan_tag()
+ *     Used by other modules to get the default vlan tag
+ */
+int edma_get_default_vlan_tag(struct net_device *netdev)
+{
+       struct edma_adapter *adapter = netdev_priv(netdev);
+
+       if (adapter->default_vlan_tag)
+               return adapter->default_vlan_tag;
+
+       return 0;
+}
+
+/* edma_open()
+ *     gets called when netdevice is up, start the queue.
+ */
+int edma_open(struct net_device *netdev)
+{
+       struct edma_adapter *adapter = netdev_priv(netdev);
+       struct platform_device *pdev = adapter->edma_cinfo->pdev;
+
+       netif_tx_start_all_queues(netdev);
+       edma_initialise_rfs_flow_table(adapter);
+       set_bit(__EDMA_UP, &adapter->state_flags);
+
+       /* if Link polling is enabled, in our case enabled for WAN, then
+        * do a phy start, else always set link as UP
+        */
+       if (adapter->poll_required) {
+               if (!IS_ERR(adapter->phydev)) {
+                       phy_start(adapter->phydev);
+                       phy_start_aneg(adapter->phydev);
+                       adapter->link_state = __EDMA_LINKDOWN;
+               } else {
+                       dev_dbg(&pdev->dev, "Invalid PHY device for a link polled interface\n");
+               }
+       } else {
+               adapter->link_state = __EDMA_LINKUP;
+               netif_carrier_on(netdev);
+       }
+
+       return 0;
+}
+
+
+/* edma_close()
+ *     gets called when netdevice is down, stops the queue.
+ */
+int edma_close(struct net_device *netdev)
+{
+       struct edma_adapter *adapter = netdev_priv(netdev);
+
+       edma_free_rfs_flow_table(adapter);
+       netif_carrier_off(netdev);
+       netif_tx_stop_all_queues(netdev);
+
+       if (adapter->poll_required) {
+               if (!IS_ERR(adapter->phydev))
+                       phy_stop(adapter->phydev);
+       }
+
+       adapter->link_state = __EDMA_LINKDOWN;
+
+       /* Set GMAC state to UP before link state is checked
+        */
+       clear_bit(__EDMA_UP, &adapter->state_flags);
+
+       return 0;
+}
+
+/* edma_poll
+ *     polling function that gets called when the napi gets scheduled.
+ *
+ * Main sequence of task performed in this api
+ * is clear irq status -> clear_tx_irq -> clean_rx_irq->
+ * enable interrupts.
+ */
+int edma_poll(struct napi_struct *napi, int budget)
+{
+       struct edma_per_cpu_queues_info *edma_percpu_info = container_of(napi,
+               struct edma_per_cpu_queues_info, napi);
+       struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo;
+       u32 reg_data;
+       u32 shadow_rx_status, shadow_tx_status;
+       int queue_id;
+       int i, work_done = 0;
+
+       /* Store the Rx/Tx status by ANDing it with
+        * appropriate CPU RX?TX mask
+        */
+       edma_read_reg(EDMA_REG_RX_ISR, &reg_data);
+       edma_percpu_info->rx_status |= reg_data & edma_percpu_info->rx_mask;
+       shadow_rx_status = edma_percpu_info->rx_status;
+       edma_read_reg(EDMA_REG_TX_ISR, &reg_data);
+       edma_percpu_info->tx_status |= reg_data & edma_percpu_info->tx_mask;
+       shadow_tx_status = edma_percpu_info->tx_status;
+
+       /* Every core will have a start, which will be computed
+        * in probe and stored in edma_percpu_info->tx_start variable.
+        * We will shift the status bit by tx_start to obtain
+        * status bits for the core on which the current processing
+        * is happening. Since, there are 4 tx queues per core,
+        * we will run the loop till we get the correct queue to clear.
+        */
+       while (edma_percpu_info->tx_status) {
+               queue_id = ffs(edma_percpu_info->tx_status) - 1;
+               edma_tx_complete(edma_cinfo, queue_id);
+               edma_percpu_info->tx_status &= ~(1 << queue_id);
+       }
+
+       /* Every core will have a start, which will be computed
+        * in probe and stored in edma_percpu_info->tx_start variable.
+        * We will shift the status bit by tx_start to obtain
+        * status bits for the core on which the current processing
+        * is happening. Since, there are 4 tx queues per core, we
+        * will run the loop till we get the correct queue to clear.
+        */
+       while (edma_percpu_info->rx_status) {
+               queue_id = ffs(edma_percpu_info->rx_status) - 1;
+               edma_rx_complete(edma_cinfo, &work_done,
+                               budget, queue_id, napi);
+
+               if (likely(work_done < budget))
+                       edma_percpu_info->rx_status &= ~(1 << queue_id);
+               else
+                       break;
+       }
+
+       /* Clear the status register, to avoid the interrupts to
+        * reoccur.This clearing of interrupt status register is
+        * done here as writing to status register only takes place
+        * once the  producer/consumer index has been updated to
+        * reflect that the packet transmission/reception went fine.
+        */
+       edma_write_reg(EDMA_REG_RX_ISR, shadow_rx_status);
+       edma_write_reg(EDMA_REG_TX_ISR, shadow_tx_status);
+
+       /* If budget not fully consumed, exit the polling mode */
+       if (likely(work_done < budget)) {
+               napi_complete(napi);
+
+               /* re-enable the interrupts */
+               for (i = 0; i < edma_cinfo->num_rxq_per_core; i++)
+                       edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x1);
+               for (i = 0; i < edma_cinfo->num_txq_per_core; i++)
+                       edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x1);
+       }
+
+       return work_done;
+}
+
+/* edma interrupt()
+ *     interrupt handler
+ */
+irqreturn_t edma_interrupt(int irq, void *dev)
+{
+       struct edma_per_cpu_queues_info *edma_percpu_info = (struct edma_per_cpu_queues_info *) dev;
+       struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo;
+       int i;
+
+       /* Unmask the TX/RX interrupt register */
+       for (i = 0; i < edma_cinfo->num_rxq_per_core; i++)
+               edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x0);
+
+       for (i = 0; i < edma_cinfo->num_txq_per_core; i++)
+               edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x0);
+
+       napi_schedule(&edma_percpu_info->napi);
+
+       return IRQ_HANDLED;
+}
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h
@@ -0,0 +1,447 @@
+/*
+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all copies.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _EDMA_H_
+#define _EDMA_H_
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/io.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/smp.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/sysctl.h>
+#include <linux/phy.h>
+#include <linux/of_net.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <asm-generic/bug.h>
+#include "ess_edma.h"
+
+#define EDMA_CPU_CORES_SUPPORTED 4
+#define EDMA_MAX_PORTID_SUPPORTED 5
+#define EDMA_MAX_VLAN_SUPPORTED  EDMA_MAX_PORTID_SUPPORTED
+#define EDMA_MAX_PORTID_BITMAP_INDEX (EDMA_MAX_PORTID_SUPPORTED + 1)
+#define EDMA_MAX_PORTID_BITMAP_SUPPORTED 0x1f  /* 0001_1111 = 0x1f */
+#define EDMA_MAX_NETDEV_PER_QUEUE 4 /* 3 Netdev per queue, 1 space for indexing */
+
+#define EDMA_MAX_RECEIVE_QUEUE 8
+#define EDMA_MAX_TRANSMIT_QUEUE 16
+
+/* WAN/LAN adapter number */
+#define EDMA_WAN 0
+#define EDMA_LAN 1
+
+/* VLAN tag */
+#define EDMA_LAN_DEFAULT_VLAN 1
+#define EDMA_WAN_DEFAULT_VLAN 2
+
+#define EDMA_DEFAULT_GROUP1_VLAN 1
+#define EDMA_DEFAULT_GROUP2_VLAN 2
+#define EDMA_DEFAULT_GROUP3_VLAN 3
+#define EDMA_DEFAULT_GROUP4_VLAN 4
+#define EDMA_DEFAULT_GROUP5_VLAN 5
+
+/* Queues exposed to linux kernel */
+#define EDMA_NETDEV_TX_QUEUE 4
+#define EDMA_NETDEV_RX_QUEUE 4
+
+/* Number of queues per core */
+#define EDMA_NUM_TXQ_PER_CORE 4
+#define EDMA_NUM_RXQ_PER_CORE 2
+
+#define EDMA_TPD_EOP_SHIFT 31
+
+#define EDMA_PORT_ID_SHIFT 12
+#define EDMA_PORT_ID_MASK 0x7
+
+/* tpd word 3 bit 18-28 */
+#define EDMA_TPD_PORT_BITMAP_SHIFT 18
+
+#define EDMA_TPD_FROM_CPU_SHIFT 25
+
+#define EDMA_FROM_CPU_MASK 0x80
+#define EDMA_SKB_PRIORITY_MASK 0x38
+
+/* TX/RX descriptor ring count */
+/* should be a power of 2 */
+#define EDMA_RX_RING_SIZE 128
+#define EDMA_TX_RING_SIZE 128
+
+/* Flags used in paged/non paged mode */
+#define EDMA_RX_HEAD_BUFF_SIZE_JUMBO 256
+#define EDMA_RX_HEAD_BUFF_SIZE 1540
+
+/* MAX frame size supported by switch */
+#define EDMA_MAX_JUMBO_FRAME_SIZE 9216
+
+/* Configurations */
+#define EDMA_INTR_CLEAR_TYPE 0
+#define EDMA_INTR_SW_IDX_W_TYPE 0
+#define EDMA_FIFO_THRESH_TYPE 0
+#define EDMA_RSS_TYPE 0
+#define EDMA_RX_IMT 0x0020
+#define EDMA_TX_IMT 0x0050
+#define EDMA_TPD_BURST 5
+#define EDMA_TXF_BURST 0x100
+#define EDMA_RFD_BURST 8
+#define EDMA_RFD_THR 16
+#define EDMA_RFD_LTHR 0
+
+/* RX/TX per CPU based mask/shift */
+#define EDMA_TX_PER_CPU_MASK 0xF
+#define EDMA_RX_PER_CPU_MASK 0x3
+#define EDMA_TX_PER_CPU_MASK_SHIFT 0x2
+#define EDMA_RX_PER_CPU_MASK_SHIFT 0x1
+#define EDMA_TX_CPU_START_SHIFT 0x2
+#define EDMA_RX_CPU_START_SHIFT 0x1
+
+/* FLags used in transmit direction */
+#define EDMA_HW_CHECKSUM 0x00000001
+#define EDMA_VLAN_TX_TAG_INSERT_FLAG 0x00000002
+#define EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG 0x00000004
+
+#define EDMA_SW_DESC_FLAG_LAST 0x1
+#define EDMA_SW_DESC_FLAG_SKB_HEAD 0x2
+#define EDMA_SW_DESC_FLAG_SKB_FRAG 0x4
+#define EDMA_SW_DESC_FLAG_SKB_FRAGLIST 0x8
+#define EDMA_SW_DESC_FLAG_SKB_NONE 0x10
+#define EDMA_SW_DESC_FLAG_SKB_REUSE 0x20
+
+
+#define EDMA_MAX_SKB_FRAGS (MAX_SKB_FRAGS + 1)
+
+/* Ethtool specific list of EDMA supported features */
+#define EDMA_SUPPORTED_FEATURES (SUPPORTED_10baseT_Half \
+                                       | SUPPORTED_10baseT_Full \
+                                       | SUPPORTED_100baseT_Half \
+                                       | SUPPORTED_100baseT_Full \
+                                       | SUPPORTED_1000baseT_Full)
+
+/* Recevie side atheros Header */
+#define EDMA_RX_ATH_HDR_VERSION 0x2
+#define EDMA_RX_ATH_HDR_VERSION_SHIFT 14
+#define EDMA_RX_ATH_HDR_PRIORITY_SHIFT 11
+#define EDMA_RX_ATH_PORT_TYPE_SHIFT 6
+#define EDMA_RX_ATH_HDR_RSTP_PORT_TYPE 0x4
+
+/* Transmit side atheros Header */
+#define EDMA_TX_ATH_HDR_PORT_BITMAP_MASK 0x7F
+#define EDMA_TX_ATH_HDR_FROM_CPU_MASK 0x80
+#define EDMA_TX_ATH_HDR_FROM_CPU_SHIFT 7
+
+#define EDMA_TXQ_START_CORE0 8
+#define EDMA_TXQ_START_CORE1 12
+#define EDMA_TXQ_START_CORE2 0
+#define EDMA_TXQ_START_CORE3 4
+
+#define EDMA_TXQ_IRQ_MASK_CORE0 0x0F00
+#define EDMA_TXQ_IRQ_MASK_CORE1 0xF000
+#define EDMA_TXQ_IRQ_MASK_CORE2 0x000F
+#define EDMA_TXQ_IRQ_MASK_CORE3 0x00F0
+
+#define EDMA_ETH_HDR_LEN 12
+#define EDMA_ETH_TYPE_MASK 0xFFFF
+
+#define EDMA_RX_BUFFER_WRITE 16
+#define EDMA_RFD_AVAIL_THR 80
+
+#define EDMA_GMAC_NO_MDIO_PHY  PHY_MAX_ADDR
+
+extern int ssdk_rfs_ipct_rule_set(__be32 ip_src, __be32 ip_dst,
+                                 __be16 sport, __be16 dport,
+                                 uint8_t proto, u16 loadbalance, bool action);
+struct edma_ethtool_statistics {
+       u32 tx_q0_pkt;
+       u32 tx_q1_pkt;
+       u32 tx_q2_pkt;
+       u32 tx_q3_pkt;
+       u32 tx_q4_pkt;
+       u32 tx_q5_pkt;
+       u32 tx_q6_pkt;
+       u32 tx_q7_pkt;
+       u32 tx_q8_pkt;
+       u32 tx_q9_pkt;
+       u32 tx_q10_pkt;
+       u32 tx_q11_pkt;
+       u32 tx_q12_pkt;
+       u32 tx_q13_pkt;
+       u32 tx_q14_pkt;
+       u32 tx_q15_pkt;
+       u32 tx_q0_byte;
+       u32 tx_q1_byte;
+       u32 tx_q2_byte;
+       u32 tx_q3_byte;
+       u32 tx_q4_byte;
+       u32 tx_q5_byte;
+       u32 tx_q6_byte;
+       u32 tx_q7_byte;
+       u32 tx_q8_byte;
+       u32 tx_q9_byte;
+       u32 tx_q10_byte;
+       u32 tx_q11_byte;
+       u32 tx_q12_byte;
+       u32 tx_q13_byte;
+       u32 tx_q14_byte;
+       u32 tx_q15_byte;
+       u32 rx_q0_pkt;
+       u32 rx_q1_pkt;
+       u32 rx_q2_pkt;
+       u32 rx_q3_pkt;
+       u32 rx_q4_pkt;
+       u32 rx_q5_pkt;
+       u32 rx_q6_pkt;
+       u32 rx_q7_pkt;
+       u32 rx_q0_byte;
+       u32 rx_q1_byte;
+       u32 rx_q2_byte;
+       u32 rx_q3_byte;
+       u32 rx_q4_byte;
+       u32 rx_q5_byte;
+       u32 rx_q6_byte;
+       u32 rx_q7_byte;
+       u32 tx_desc_error;
+};
+
+struct edma_mdio_data {
+       struct mii_bus  *mii_bus;
+       void __iomem    *membase;
+       int phy_irq[PHY_MAX_ADDR];
+};
+
+/* EDMA LINK state */
+enum edma_link_state {
+       __EDMA_LINKUP, /* Indicate link is UP */
+       __EDMA_LINKDOWN /* Indicate link is down */
+};
+
+/* EDMA GMAC state */
+enum edma_gmac_state {
+       __EDMA_UP /* use to indicate GMAC is up */
+};
+
+/* edma transmit descriptor */
+struct edma_tx_desc {
+       __le16  len; /* full packet including CRC */
+       __le16  svlan_tag; /* vlan tag */
+       __le32  word1; /* byte 4-7 */
+       __le32  addr; /* address of buffer */
+       __le32  word3; /* byte 12 */
+};
+
+/* edma receive return descriptor */
+struct edma_rx_return_desc {
+       u16 rrd0;
+       u16 rrd1;
+       u16 rrd2;
+       u16 rrd3;
+       u16 rrd4;
+       u16 rrd5;
+       u16 rrd6;
+       u16 rrd7;
+};
+
+/* RFD descriptor */
+struct edma_rx_free_desc {
+       __le32  buffer_addr; /* buffer address */
+};
+
+/* edma hw specific data */
+struct edma_hw {
+       u32  __iomem *hw_addr; /* inner register address */
+       struct edma_adapter *adapter; /* netdevice adapter */
+       u32 rx_intr_mask; /*rx interrupt mask */
+       u32 tx_intr_mask; /* tx interrupt nask */
+       u32 misc_intr_mask; /* misc interrupt mask */
+       u32 wol_intr_mask; /* wake on lan interrupt mask */
+       bool intr_clear_type; /* interrupt clear */
+       bool intr_sw_idx_w; /* interrupt software index */
+       u32 rx_head_buff_size; /* Rx buffer size */
+       u8 rss_type; /* rss protocol type */
+};
+
+/* edma_sw_desc stores software descriptor
+ * SW descriptor has 1:1 map with HW descriptor
+ */
+struct edma_sw_desc {
+       struct sk_buff *skb;
+       dma_addr_t dma; /* dma address */
+       u16 length; /* Tx/Rx buffer length */
+       u32 flags;
+};
+
+/* per core related information */
+struct edma_per_cpu_queues_info {
+       struct napi_struct napi; /* napi associated with the core */
+       u32 tx_mask; /* tx interrupt mask */
+       u32 rx_mask; /* rx interrupt mask */
+       u32 tx_status; /* tx interrupt status */
+       u32 rx_status; /* rx interrupt status */
+       u32 tx_start; /* tx queue start */
+       u32 rx_start; /* rx queue start */
+       struct edma_common_info *edma_cinfo; /* edma common info */
+};
+
+/* edma specific common info */
+struct edma_common_info {
+       struct edma_tx_desc_ring *tpd_ring[16]; /* 16 Tx queues */
+       struct edma_rfd_desc_ring *rfd_ring[8]; /* 8 Rx queues */
+       struct platform_device *pdev; /* device structure */
+       struct net_device *netdev[EDMA_MAX_PORTID_SUPPORTED];
+       struct net_device *portid_netdev_lookup_tbl[EDMA_MAX_PORTID_BITMAP_INDEX];
+       struct ctl_table_header *edma_ctl_table_hdr;
+       int num_gmac;
+       struct edma_ethtool_statistics edma_ethstats; /* ethtool stats */
+       int num_rx_queues; /* number of rx queue */
+       u32 num_tx_queues; /* number of tx queue */
+       u32 tx_irq[16]; /* number of tx irq */
+       u32 rx_irq[8]; /* number of rx irq */
+       u32 from_cpu; /* from CPU TPD field */
+       u32 num_rxq_per_core; /* Rx queues per core */
+       u32 num_txq_per_core; /* Tx queues per core */
+       u16 tx_ring_count; /* Tx ring count */
+       u16 rx_ring_count; /* Rx ring*/
+       u16 rx_head_buffer_len; /* rx buffer length */
+       u16 rx_page_buffer_len; /* rx buffer length */
+       u32 page_mode; /* Jumbo frame supported flag */
+       u32 fraglist_mode; /* fraglist supported flag */
+       struct edma_hw hw; /* edma hw specific structure */
+       struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */
+       spinlock_t stats_lock; /* protect edma stats area for updation */
+       struct timer_list edma_stats_timer;
+};
+
+/* transimit packet descriptor (tpd) ring */
+struct edma_tx_desc_ring {
+       struct netdev_queue *nq[EDMA_MAX_NETDEV_PER_QUEUE]; /* Linux queue index */
+       struct net_device *netdev[EDMA_MAX_NETDEV_PER_QUEUE];
+                       /* Array of netdevs associated with the tpd ring */
+       void *hw_desc; /* descriptor ring virtual address */
+       struct edma_sw_desc *sw_desc; /* buffer associated with ring */
+       int netdev_bmp; /* Bitmap for per-ring netdevs */
+       u32 size; /* descriptor ring length in bytes */
+       u16 count; /* number of descriptors in the ring */
+       dma_addr_t dma; /* descriptor ring physical address */
+       u16 sw_next_to_fill; /* next Tx descriptor to fill */
+       u16 sw_next_to_clean; /* next Tx descriptor to clean */
+};
+
+/* receive free descriptor (rfd) ring */
+struct edma_rfd_desc_ring {
+       void *hw_desc; /* descriptor ring virtual address */
+       struct edma_sw_desc *sw_desc; /* buffer associated with ring */
+       u16 size; /* bytes allocated to sw_desc */
+       u16 count; /* number of descriptors in the ring */
+       dma_addr_t dma; /* descriptor ring physical address */
+       u16 sw_next_to_fill; /* next descriptor to fill */
+       u16 sw_next_to_clean; /* next descriptor to clean */
+};
+
+/* edma_rfs_flter_node - rfs filter node in hash table */
+struct edma_rfs_filter_node {
+       struct flow_keys keys;
+       u32 flow_id; /* flow_id of filter provided by kernel */
+       u16 filter_id; /* filter id of filter returned by adaptor */
+       u16 rq_id; /* desired rq index */
+       struct hlist_node node; /* edma rfs list node */
+};
+
+/* edma_rfs_flow_tbl - rfs flow table */
+struct edma_rfs_flow_table {
+       u16 max_num_filter; /* Maximum number of filters edma supports */
+       u16 hashtoclean; /* hash table index to clean next */
+       int filter_available; /* Number of free filters available */
+       struct hlist_head hlist_head[EDMA_RFS_FLOW_ENTRIES];
+       spinlock_t rfs_ftab_lock;
+       struct timer_list expire_rfs; /* timer function for edma_rps_may_expire_flow */
+};
+
+/* EDMA net device structure */
+struct edma_adapter {
+       struct net_device *netdev; /* netdevice */
+       struct platform_device *pdev; /* platform device */
+       struct edma_common_info *edma_cinfo; /* edma common info */
+       struct phy_device *phydev; /* Phy device */
+       struct edma_rfs_flow_table rfs; /* edma rfs flow table */
+       struct net_device_stats stats; /* netdev statistics */
+       set_rfs_filter_callback_t set_rfs_rule;
+       u32 flags;/* status flags */
+       unsigned long state_flags; /* GMAC up/down flags */
+       u32 forced_speed; /* link force speed */
+       u32 forced_duplex; /* link force duplex */
+       u32 link_state; /* phy link state */
+       u32 phy_mdio_addr; /* PHY device address on MII interface */
+       u32 poll_required; /* check if link polling is required */
+       u32 tx_start_offset[CONFIG_NR_CPUS]; /* tx queue start */
+       u32 default_vlan_tag; /* vlan tag */
+       u32 dp_bitmap;
+       uint8_t phy_id[MII_BUS_ID_SIZE + 3];
+};
+
+int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo);
+int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo);
+int edma_open(struct net_device *netdev);
+int edma_close(struct net_device *netdev);
+void edma_free_tx_resources(struct edma_common_info *edma_c_info);
+void edma_free_rx_resources(struct edma_common_info *edma_c_info);
+int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo);
+int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo);
+void edma_free_tx_rings(struct edma_common_info *edma_cinfo);
+void edma_free_rx_rings(struct edma_common_info *edma_cinfo);
+void edma_free_queues(struct edma_common_info *edma_cinfo);
+void edma_irq_disable(struct edma_common_info *edma_cinfo);
+int edma_reset(struct edma_common_info *edma_cinfo);
+int edma_poll(struct napi_struct *napi, int budget);
+netdev_tx_t edma_xmit(struct sk_buff *skb,
+               struct net_device *netdev);
+int edma_configure(struct edma_common_info *edma_cinfo);
+void edma_irq_enable(struct edma_common_info *edma_cinfo);
+void edma_enable_tx_ctrl(struct edma_hw *hw);
+void edma_enable_rx_ctrl(struct edma_hw *hw);
+void edma_stop_rx_tx(struct edma_hw *hw);
+void edma_free_irqs(struct edma_adapter *adapter);
+irqreturn_t edma_interrupt(int irq, void *dev);
+void edma_write_reg(u16 reg_addr, u32 reg_value);
+void edma_read_reg(u16 reg_addr, volatile u32 *reg_value);
+struct net_device_stats *edma_get_stats(struct net_device *netdev);
+int edma_set_mac_addr(struct net_device *netdev, void *p);
+int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
+               u16 rxq, u32 flow_id);
+int edma_register_rfs_filter(struct net_device *netdev,
+               set_rfs_filter_callback_t set_filter);
+void edma_flow_may_expire(struct timer_list *t);
+void edma_set_ethtool_ops(struct net_device *netdev);
+void edma_set_stp_rstp(bool tag);
+void edma_assign_ath_hdr_type(int tag);
+int edma_get_default_vlan_tag(struct net_device *netdev);
+void edma_adjust_link(struct net_device *netdev);
+int edma_fill_netdev(struct edma_common_info *edma_cinfo, int qid, int num, int txq_id);
+void edma_read_append_stats(struct edma_common_info *edma_cinfo);
+void edma_change_tx_coalesce(int usecs);
+void edma_change_rx_coalesce(int usecs);
+void edma_get_tx_rx_coalesce(u32 *reg_val);
+void edma_clear_irq_status(void);
+#endif /* _EDMA_H_ */
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
@@ -0,0 +1,1216 @@
+/*
+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all copies.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/cpu_rmap.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+#include <linux/timer.h>
+#include "edma.h"
+#include "ess_edma.h"
+
+/* Weight round robin and virtual QID mask */
+#define EDMA_WRR_VID_SCTL_MASK 0xffff
+
+/* Weight round robin and virtual QID shift */
+#define EDMA_WRR_VID_SCTL_SHIFT 16
+
+char edma_axi_driver_name[] = "ess_edma";
+static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
+       NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;
+
+static u32 edma_hw_addr;
+
+char edma_tx_irq[16][64];
+char edma_rx_irq[8][64];
+struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED];
+static u16 tx_start[4] = {EDMA_TXQ_START_CORE0, EDMA_TXQ_START_CORE1,
+                       EDMA_TXQ_START_CORE2, EDMA_TXQ_START_CORE3};
+static u32 tx_mask[4] = {EDMA_TXQ_IRQ_MASK_CORE0, EDMA_TXQ_IRQ_MASK_CORE1,
+                       EDMA_TXQ_IRQ_MASK_CORE2, EDMA_TXQ_IRQ_MASK_CORE3};
+
+static u32 edma_default_ltag  __read_mostly = EDMA_LAN_DEFAULT_VLAN;
+static u32 edma_default_wtag  __read_mostly = EDMA_WAN_DEFAULT_VLAN;
+static u32 edma_default_group1_vtag  __read_mostly = EDMA_DEFAULT_GROUP1_VLAN;
+static u32 edma_default_group2_vtag  __read_mostly = EDMA_DEFAULT_GROUP2_VLAN;
+static u32 edma_default_group3_vtag  __read_mostly = EDMA_DEFAULT_GROUP3_VLAN;
+static u32 edma_default_group4_vtag  __read_mostly = EDMA_DEFAULT_GROUP4_VLAN;
+static u32 edma_default_group5_vtag  __read_mostly = EDMA_DEFAULT_GROUP5_VLAN;
+static u32 edma_rss_idt_val = EDMA_RSS_IDT_VALUE;
+static u32 edma_rss_idt_idx;
+
+static int edma_weight_assigned_to_q __read_mostly;
+static int edma_queue_to_virtual_q __read_mostly;
+static bool edma_enable_rstp  __read_mostly;
+static int edma_athr_hdr_eth_type __read_mostly;
+
+static int page_mode;
+module_param(page_mode, int, 0);
+MODULE_PARM_DESC(page_mode, "enable page mode");
+
+static int overwrite_mode;
+module_param(overwrite_mode, int, 0);
+MODULE_PARM_DESC(overwrite_mode, "overwrite default page_mode setting");
+
+static int jumbo_mru = EDMA_RX_HEAD_BUFF_SIZE;
+module_param(jumbo_mru, int, 0);
+MODULE_PARM_DESC(jumbo_mru, "enable fraglist support");
+
+static int num_rxq = 4;
+module_param(num_rxq, int, 0);
+MODULE_PARM_DESC(num_rxq, "change the number of rx queues");
+
+void edma_write_reg(u16 reg_addr, u32 reg_value)
+{
+       writel(reg_value, ((void __iomem *)(edma_hw_addr + reg_addr)));
+}
+
+void edma_read_reg(u16 reg_addr, volatile u32 *reg_value)
+{
+       *reg_value = readl((void __iomem *)(edma_hw_addr + reg_addr));
+}
+
+/* edma_change_tx_coalesce()
+ *     change tx interrupt moderation timer
+ */
+void edma_change_tx_coalesce(int usecs)
+{
+       u32 reg_value;
+
+       /* Here, we right shift the value from the user by 1, this is
+        * done because IMT resolution timer is 2usecs. 1 count
+        * of this register corresponds to 2 usecs.
+        */
+       edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, &reg_value);
+       reg_value = ((reg_value & 0xffff) | ((usecs >> 1) << 16));
+       edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value);
+}
+
+/* edma_change_rx_coalesce()
+ *     change rx interrupt moderation timer
+ */
+void edma_change_rx_coalesce(int usecs)
+{
+       u32 reg_value;
+
+       /* Here, we right shift the value from the user by 1, this is
+        * done because IMT resolution timer is 2usecs. 1 count
+        * of this register corresponds to 2 usecs.
+        */
+       edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, &reg_value);
+       reg_value = ((reg_value & 0xffff0000) | (usecs >> 1));
+       edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value);
+}
+
+/* edma_get_tx_rx_coalesce()
+ *     Get tx/rx interrupt moderation value
+ */
+void edma_get_tx_rx_coalesce(u32 *reg_val)
+{
+       edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_val);
+}
+
+void edma_read_append_stats(struct edma_common_info *edma_cinfo)
+{
+       uint32_t *p;
+       int i;
+       u32 stat;
+
+       spin_lock(&edma_cinfo->stats_lock);
+       p = (uint32_t *)&(edma_cinfo->edma_ethstats);
+
+       for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) {
+               edma_read_reg(EDMA_REG_TX_STAT_PKT_Q(i), &stat);
+               *p += stat;
+               p++;
+       }
+
+       for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) {
+               edma_read_reg(EDMA_REG_TX_STAT_BYTE_Q(i), &stat);
+               *p += stat;
+               p++;
+       }
+
+       for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) {
+               edma_read_reg(EDMA_REG_RX_STAT_PKT_Q(i), &stat);
+               *p += stat;
+               p++;
+       }
+
+       for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) {
+               edma_read_reg(EDMA_REG_RX_STAT_BYTE_Q(i), &stat);
+               *p += stat;
+               p++;
+       }
+
+       spin_unlock(&edma_cinfo->stats_lock);
+}
+
+static void edma_statistics_timer(struct timer_list *t)
+{
+       struct edma_common_info *edma_cinfo =
+               from_timer(edma_cinfo, t, edma_stats_timer);
+
+       edma_read_append_stats(edma_cinfo);
+
+       mod_timer(&edma_cinfo->edma_stats_timer, jiffies + 1*HZ);
+}
+
+static int edma_enable_stp_rstp(struct ctl_table *table, int write,
+                               void __user *buffer, size_t *lenp,
+                               loff_t *ppos)
+{
+       int ret;
+
+       ret = proc_dointvec(table, write, buffer, lenp, ppos);
+       if (write)
+               edma_set_stp_rstp(edma_enable_rstp);
+
+       return ret;
+}
+
+static int edma_ath_hdr_eth_type(struct ctl_table *table, int write,
+                                void __user *buffer, size_t *lenp,
+                                loff_t *ppos)
+{
+       int ret;
+
+       ret = proc_dointvec(table, write, buffer, lenp, ppos);
+       if (write)
+               edma_assign_ath_hdr_type(edma_athr_hdr_eth_type);
+
+       return ret;
+}
+
+static int edma_change_default_lan_vlan(struct ctl_table *table, int write,
+                                       void __user *buffer, size_t *lenp,
+                                       loff_t *ppos)
+{
+       struct edma_adapter *adapter;
+       int ret;
+
+       if (!edma_netdev[1]) {
+               pr_err("Netdevice for default_lan does not exist\n");
+               return -1;
+       }
+
+       adapter = netdev_priv(edma_netdev[1]);
+
+       ret = proc_dointvec(table, write, buffer, lenp, ppos);
+
+       if (write)
+               adapter->default_vlan_tag = edma_default_ltag;
+
+       return ret;
+}
+
+static int edma_change_default_wan_vlan(struct ctl_table *table, int write,
+                                       void __user *buffer, size_t *lenp,
+                                       loff_t *ppos)
+{
+       struct edma_adapter *adapter;
+       int ret;
+
+       if (!edma_netdev[0]) {
+               pr_err("Netdevice for default_wan does not exist\n");
+               return -1;
+       }
+
+       adapter = netdev_priv(edma_netdev[0]);
+
+       ret = proc_dointvec(table, write, buffer, lenp, ppos);
+
+       if (write)
+               adapter->default_vlan_tag = edma_default_wtag;
+
+       return ret;
+}
+
+static int edma_change_group1_vtag(struct ctl_table *table, int write,
+                                  void __user *buffer, size_t *lenp,
+                                  loff_t *ppos)
+{
+       struct edma_adapter *adapter;
+       struct edma_common_info *edma_cinfo;
+       int ret;
+
+       if (!edma_netdev[0]) {
+               pr_err("Netdevice for Group 1 does not exist\n");
+               return -1;
+       }
+
+       adapter = netdev_priv(edma_netdev[0]);
+       edma_cinfo = adapter->edma_cinfo;
+
+       ret = proc_dointvec(table, write, buffer, lenp, ppos);
+
+       if (write)
+               adapter->default_vlan_tag = edma_default_group1_vtag;
+
+       return ret;
+}
+
+static int edma_change_group2_vtag(struct ctl_table *table, int write,
+                                  void __user *buffer, size_t *lenp,
+                                  loff_t *ppos)
+{
+       struct edma_adapter *adapter;
+       struct edma_common_info *edma_cinfo;
+       int ret;
+
+       if (!edma_netdev[1]) {
+               pr_err("Netdevice for Group 2 does not exist\n");
+               return -1;
+       }
+
+       adapter = netdev_priv(edma_netdev[1]);
+       edma_cinfo = adapter->edma_cinfo;
+
+       ret = proc_dointvec(table, write, buffer, lenp, ppos);
+
+       if (write)
+               adapter->default_vlan_tag = edma_default_group2_vtag;
+
+       return ret;
+}
+
+static int edma_change_group3_vtag(struct ctl_table *table, int write,
+                                  void __user *buffer, size_t *lenp,
+                                  loff_t *ppos)
+{
+       struct edma_adapter *adapter;
+       struct edma_common_info *edma_cinfo;
+       int ret;
+
+       if (!edma_netdev[2]) {
+               pr_err("Netdevice for Group 3 does not exist\n");
+               return -1;
+       }
+
+       adapter = netdev_priv(edma_netdev[2]);
+       edma_cinfo = adapter->edma_cinfo;
+
+       ret = proc_dointvec(table, write, buffer, lenp, ppos);
+
+       if (write)
+               adapter->default_vlan_tag = edma_default_group3_vtag;
+
+       return ret;
+}
+
+static int edma_change_group4_vtag(struct ctl_table *table, int write,
+                                  void __user *buffer, size_t *lenp,
+                                  loff_t *ppos)
+{
+       struct edma_adapter *adapter;
+       struct edma_common_info *edma_cinfo;
+       int ret;
+
+       if (!edma_netdev[3]) {
+               pr_err("Netdevice for Group 4 does not exist\n");
+               return -1;
+       }
+
+       adapter = netdev_priv(edma_netdev[3]);
+       edma_cinfo = adapter->edma_cinfo;
+
+       ret = proc_dointvec(table, write, buffer, lenp, ppos);
+
+       if (write)
+               adapter->default_vlan_tag = edma_default_group4_vtag;
+
+       return ret;
+}
+
+static int edma_change_group5_vtag(struct ctl_table *table, int write,
+                                  void __user *buffer, size_t *lenp,
+                                  loff_t *ppos)
+{
+       struct edma_adapter *adapter;
+       struct edma_common_info *edma_cinfo;
+       int ret;
+
+       if (!edma_netdev[4]) {
+               pr_err("Netdevice for Group 5 does not exist\n");
+               return -1;
+       }
+
+       adapter = netdev_priv(edma_netdev[4]);
+       edma_cinfo = adapter->edma_cinfo;
+
+       ret = proc_dointvec(table, write, buffer, lenp, ppos);
+
+       if (write)
+               adapter->default_vlan_tag = edma_default_group5_vtag;
+
+       return ret;
+}
+
+static int edma_set_rss_idt_value(struct ctl_table *table, int write,
+                                 void __user *buffer, size_t *lenp,
+                                 loff_t *ppos)
+{
+       int ret;
+
+       ret = proc_dointvec(table, write, buffer, lenp, ppos);
+       if (write && !ret)
+               edma_write_reg(EDMA_REG_RSS_IDT(edma_rss_idt_idx),
+                              edma_rss_idt_val);
+       return ret;
+}
+
+static int edma_set_rss_idt_idx(struct ctl_table *table, int write,
+                               void __user *buffer, size_t *lenp,
+                               loff_t *ppos)
+{
+       int ret;
+       u32 old_value = edma_rss_idt_idx;
+
+       ret = proc_dointvec(table, write, buffer, lenp, ppos);
+       if (!write || ret)
+               return ret;
+
+       if (edma_rss_idt_idx >= EDMA_NUM_IDT) {
+               pr_err("Invalid RSS indirection table index %d\n",
+                      edma_rss_idt_idx);
+               edma_rss_idt_idx = old_value;
+               return -EINVAL;
+       }
+       return ret;
+}
+
+static int edma_weight_assigned_to_queues(struct ctl_table *table, int write,
+                                         void __user *buffer, size_t *lenp,
+                                         loff_t *ppos)
+{
+       int ret, queue_id, weight;
+       u32 reg_data, data, reg_addr;
+
+       ret = proc_dointvec(table, write, buffer, lenp, ppos);
+       if (write) {
+               queue_id = edma_weight_assigned_to_q & EDMA_WRR_VID_SCTL_MASK;
+               if (queue_id < 0 || queue_id > 15) {
+                       pr_err("queue_id not within desired range\n");
+                       return -EINVAL;
+               }
+
+               weight = edma_weight_assigned_to_q >> EDMA_WRR_VID_SCTL_SHIFT;
+               if (weight < 0 || weight > 0xF) {
+                       pr_err("queue_id not within desired range\n");
+                       return -EINVAL;
+               }
+
+               data = weight << EDMA_WRR_SHIFT(queue_id);
+
+               reg_addr = EDMA_REG_WRR_CTRL_Q0_Q3 + (queue_id & ~0x3);
+               edma_read_reg(reg_addr, &reg_data);
+               reg_data &= ~(1 << EDMA_WRR_SHIFT(queue_id));
+               edma_write_reg(reg_addr, data | reg_data);
+       }
+
+       return ret;
+}
+
+static int edma_queue_to_virtual_queue_map(struct ctl_table *table, int write,
+                                          void __user *buffer, size_t *lenp,
+                                          loff_t *ppos)
+{
+       int ret, queue_id, virtual_qid;
+       u32 reg_data, data, reg_addr;
+
+       ret = proc_dointvec(table, write, buffer, lenp, ppos);
+       if (write) {
+               queue_id = edma_queue_to_virtual_q & EDMA_WRR_VID_SCTL_MASK;
+               if (queue_id < 0 || queue_id > 15) {
+                       pr_err("queue_id not within desired range\n");
+                       return -EINVAL;
+               }
+
+               virtual_qid = edma_queue_to_virtual_q >>
+                       EDMA_WRR_VID_SCTL_SHIFT;
+               if (virtual_qid < 0 || virtual_qid > 8) {
+                       pr_err("queue_id not within desired range\n");
+                       return -EINVAL;
+               }
+
+               data = virtual_qid << EDMA_VQ_ID_SHIFT(queue_id);
+
+               reg_addr = EDMA_REG_VQ_CTRL0 + (queue_id & ~0x3);
+               edma_read_reg(reg_addr, &reg_data);
+               reg_data &= ~(1 << EDMA_VQ_ID_SHIFT(queue_id));
+               edma_write_reg(reg_addr, data | reg_data);
+       }
+
+       return ret;
+}
+
+static struct ctl_table edma_table[] = {
+       {
+               .procname       = "default_lan_tag",
+               .data           = &edma_default_ltag,
+               .maxlen         = sizeof(int),
+               .mode           = 0644,
+               .proc_handler   = edma_change_default_lan_vlan
+       },
+       {
+               .procname       = "default_wan_tag",
+               .data           = &edma_default_wtag,
+               .maxlen         = sizeof(int),
+               .mode           = 0644,
+               .proc_handler   = edma_change_default_wan_vlan
+       },
+       {
+               .procname       = "weight_assigned_to_queues",
+               .data           = &edma_weight_assigned_to_q,
+               .maxlen         = sizeof(int),
+               .mode           = 0644,
+               .proc_handler   = edma_weight_assigned_to_queues
+       },
+       {
+               .procname       = "queue_to_virtual_queue_map",
+               .data           = &edma_queue_to_virtual_q,
+               .maxlen         = sizeof(int),
+               .mode           = 0644,
+               .proc_handler   = edma_queue_to_virtual_queue_map
+       },
+       {
+               .procname       = "enable_stp_rstp",
+               .data           = &edma_enable_rstp,
+               .maxlen         = sizeof(int),
+               .mode           = 0644,
+               .proc_handler   = edma_enable_stp_rstp
+       },
+       {
+               .procname       = "athr_hdr_eth_type",
+               .data           = &edma_athr_hdr_eth_type,
+               .maxlen         = sizeof(int),
+               .mode           = 0644,
+               .proc_handler   = edma_ath_hdr_eth_type
+       },
+       {
+               .procname       = "default_group1_vlan_tag",
+               .data           = &edma_default_group1_vtag,
+               .maxlen         = sizeof(int),
+               .mode           = 0644,
+               .proc_handler   = edma_change_group1_vtag
+       },
+       {
+               .procname       = "default_group2_vlan_tag",
+               .data           = &edma_default_group2_vtag,
+               .maxlen         = sizeof(int),
+               .mode           = 0644,
+               .proc_handler   = edma_change_group2_vtag
+       },
+       {
+               .procname       = "default_group3_vlan_tag",
+               .data           = &edma_default_group3_vtag,
+               .maxlen         = sizeof(int),
+               .mode           = 0644,
+               .proc_handler   = edma_change_group3_vtag
+       },
+       {
+               .procname       = "default_group4_vlan_tag",
+               .data           = &edma_default_group4_vtag,
+               .maxlen         = sizeof(int),
+               .mode           = 0644,
+               .proc_handler   = edma_change_group4_vtag
+       },
+       {
+               .procname       = "default_group5_vlan_tag",
+               .data           = &edma_default_group5_vtag,
+               .maxlen         = sizeof(int),
+               .mode           = 0644,
+               .proc_handler   = edma_change_group5_vtag
+       },
+       {
+               .procname       = "edma_rss_idt_value",
+               .data           = &edma_rss_idt_val,
+               .maxlen         = sizeof(int),
+               .mode           = 0644,
+               .proc_handler   = edma_set_rss_idt_value
+       },
+       {
+               .procname       = "edma_rss_idt_idx",
+               .data           = &edma_rss_idt_idx,
+               .maxlen         = sizeof(int),
+               .mode           = 0644,
+               .proc_handler   = edma_set_rss_idt_idx
+       },
+       {}
+};
+
+/* edma_axi_netdev_ops
+ *     Describe the operations supported by registered netdevices
+ *
+ * static const struct net_device_ops edma_axi_netdev_ops = {
+ *     .ndo_open               = edma_open,
+ *     .ndo_stop               = edma_close,
+ *     .ndo_start_xmit         = edma_xmit_frame,
+ *     .ndo_set_mac_address    = edma_set_mac_addr,
+ * }
+ */
+static const struct net_device_ops edma_axi_netdev_ops = {
+       .ndo_open               = edma_open,
+       .ndo_stop               = edma_close,
+       .ndo_start_xmit         = edma_xmit,
+       .ndo_set_mac_address    = edma_set_mac_addr,
+#ifdef CONFIG_RFS_ACCEL
+       .ndo_rx_flow_steer      = edma_rx_flow_steer,
+       .ndo_register_rfs_filter = edma_register_rfs_filter,
+       .ndo_get_default_vlan_tag = edma_get_default_vlan_tag,
+#endif
+       .ndo_get_stats          = edma_get_stats,
+};
+
+/* edma_axi_probe()
+ *     Initialise an adapter identified by a platform_device structure.
+ *
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur in the probe.
+ */
+static int edma_axi_probe(struct platform_device *pdev)
+{
+       struct edma_common_info *edma_cinfo;
+       struct edma_hw *hw;
+       struct edma_adapter *adapter[EDMA_MAX_PORTID_SUPPORTED];
+       struct resource *res;
+       struct device_node *np = pdev->dev.of_node;
+       struct device_node *pnp;
+       struct device_node *mdio_node = NULL;
+       struct platform_device *mdio_plat = NULL;
+       struct mii_bus *miibus = NULL;
+       struct edma_mdio_data *mdio_data = NULL;
+       int i, j, k, err = 0;
+       int portid_bmp;
+       int idx = 0, idx_mac = 0;
+
+       if (CONFIG_NR_CPUS != EDMA_CPU_CORES_SUPPORTED) {
+               dev_err(&pdev->dev, "Invalid CPU Cores\n");
+               return -EINVAL;
+       }
+
+       if ((num_rxq != 4) && (num_rxq != 8)) {
+               dev_err(&pdev->dev, "Invalid RX queue, edma probe failed\n");
+               return -EINVAL;
+       }
+       edma_cinfo = kzalloc(sizeof(struct edma_common_info), GFP_KERNEL);
+       if (!edma_cinfo) {
+               err = -ENOMEM;
+               goto err_alloc;
+       }
+
+       edma_cinfo->pdev = pdev;
+
+       of_property_read_u32(np, "qcom,num_gmac", &edma_cinfo->num_gmac);
+       if (edma_cinfo->num_gmac > EDMA_MAX_PORTID_SUPPORTED) {
+               pr_err("Invalid DTSI Entry for qcom,num_gmac\n");
+               err = -EINVAL;
+               goto err_cinfo;
+       }
+
+       /* Initialize the netdev array before allocation
+        * to avoid double free
+        */
+       for (i = 0 ; i < edma_cinfo->num_gmac ; i++)
+               edma_netdev[i] = NULL;
+
+       for (i = 0 ; i < edma_cinfo->num_gmac ; i++) {
+               edma_netdev[i] = alloc_etherdev_mqs(sizeof(struct edma_adapter),
+                       EDMA_NETDEV_TX_QUEUE, EDMA_NETDEV_RX_QUEUE);
+
+               if (!edma_netdev[i]) {
+                       dev_err(&pdev->dev,
+                               "net device alloc fails for index=%d\n", i);
+                       err = -ENODEV;
+                       goto err_ioremap;
+               }
+
+               SET_NETDEV_DEV(edma_netdev[i], &pdev->dev);
+               platform_set_drvdata(pdev, edma_netdev[i]);
+               edma_cinfo->netdev[i] = edma_netdev[i];
+       }
+
+       /* Fill ring details */
+       edma_cinfo->num_tx_queues = EDMA_MAX_TRANSMIT_QUEUE;
+       edma_cinfo->num_txq_per_core = (EDMA_MAX_TRANSMIT_QUEUE / 4);
+       edma_cinfo->tx_ring_count = EDMA_TX_RING_SIZE;
+
+       /* Update num rx queues based on module parameter */
+       edma_cinfo->num_rx_queues = num_rxq;
+       edma_cinfo->num_rxq_per_core = ((num_rxq == 4) ? 1 : 2);
+
+       edma_cinfo->rx_ring_count = EDMA_RX_RING_SIZE;
+
+       hw = &edma_cinfo->hw;
+
+       /* Fill HW defaults */
+       hw->tx_intr_mask = EDMA_TX_IMR_NORMAL_MASK;
+       hw->rx_intr_mask = EDMA_RX_IMR_NORMAL_MASK;
+
+       of_property_read_u32(np, "qcom,page-mode", &edma_cinfo->page_mode);
+       of_property_read_u32(np, "qcom,rx_head_buf_size",
+                            &hw->rx_head_buff_size);
+
+       if (overwrite_mode) {
+               dev_info(&pdev->dev, "page mode overwritten");
+               edma_cinfo->page_mode = page_mode;
+       }
+
+       if (jumbo_mru)
+               edma_cinfo->fraglist_mode = 1;
+
+       if (edma_cinfo->page_mode)
+               hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE_JUMBO;
+       else if (edma_cinfo->fraglist_mode)
+               hw->rx_head_buff_size = jumbo_mru;
+       else if (!hw->rx_head_buff_size)
+               hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE;
+
+       hw->misc_intr_mask = 0;
+       hw->wol_intr_mask = 0;
+
+       hw->intr_clear_type = EDMA_INTR_CLEAR_TYPE;
+       hw->intr_sw_idx_w = EDMA_INTR_SW_IDX_W_TYPE;
+
+       /* configure RSS type to the different protocol that can be
+        * supported
+        */
+       hw->rss_type = EDMA_RSS_TYPE_IPV4TCP | EDMA_RSS_TYPE_IPV6_TCP |
+               EDMA_RSS_TYPE_IPV4_UDP | EDMA_RSS_TYPE_IPV6UDP |
+               EDMA_RSS_TYPE_IPV4 | EDMA_RSS_TYPE_IPV6;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+       edma_cinfo->hw.hw_addr = devm_ioremap_resource(&pdev->dev, res);
+       if (IS_ERR(edma_cinfo->hw.hw_addr)) {
+               err = PTR_ERR(edma_cinfo->hw.hw_addr);
+               goto err_ioremap;
+       }
+
+       edma_hw_addr = (u32)edma_cinfo->hw.hw_addr;
+
+       /* Parse tx queue interrupt number from device tree */
+       for (i = 0; i < edma_cinfo->num_tx_queues; i++)
+               edma_cinfo->tx_irq[i] = platform_get_irq(pdev, i);
+
+       /* Parse rx queue interrupt number from device tree
+        * Here we are setting j to point to the point where we
+        * left tx interrupt parsing(i.e 16) and run run the loop
+        * from 0 to 7 to parse rx interrupt number.
+        */
+       for (i = 0, j = edma_cinfo->num_tx_queues, k = 0;
+                       i < edma_cinfo->num_rx_queues; i++) {
+               edma_cinfo->rx_irq[k] = platform_get_irq(pdev, j);
+               k += ((num_rxq == 4) ?  2 : 1);
+               j += ((num_rxq == 4) ?  2 : 1);
+       }
+
+       edma_cinfo->rx_head_buffer_len = edma_cinfo->hw.rx_head_buff_size;
+       edma_cinfo->rx_page_buffer_len = PAGE_SIZE;
+
+       err = edma_alloc_queues_tx(edma_cinfo);
+       if (err) {
+               dev_err(&pdev->dev, "Allocation of TX queue failed\n");
+               goto err_tx_qinit;
+       }
+
+       err = edma_alloc_queues_rx(edma_cinfo);
+       if (err) {
+               dev_err(&pdev->dev, "Allocation of RX queue failed\n");
+               goto err_rx_qinit;
+       }
+
+       err = edma_alloc_tx_rings(edma_cinfo);
+       if (err) {
+               dev_err(&pdev->dev, "Allocation of TX resources failed\n");
+               goto err_tx_rinit;
+       }
+
+       err = edma_alloc_rx_rings(edma_cinfo);
+       if (err) {
+               dev_err(&pdev->dev, "Allocation of RX resources failed\n");
+               goto err_rx_rinit;
+       }
+
+       /* Initialize netdev and netdev bitmap for transmit descriptor rings */
+       for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
+               struct edma_tx_desc_ring *etdr =  edma_cinfo->tpd_ring[i];
+               int j;
+
+               etdr->netdev_bmp = 0;
+               for (j = 0; j < EDMA_MAX_NETDEV_PER_QUEUE; j++) {
+                       etdr->netdev[j] = NULL;
+                       etdr->nq[j] = NULL;
+               }
+       }
+
+       if (of_property_read_bool(np, "qcom,mdio_supported")) {
+               mdio_node = of_find_compatible_node(NULL, NULL,
+                                                   "qcom,ipq4019-mdio");
+               if (!mdio_node) {
+                       dev_err(&pdev->dev, "cannot find mdio node by phandle");
+                       err = -EIO;
+                       goto err_mdiobus_init_fail;
+               }
+
+               mdio_plat = of_find_device_by_node(mdio_node);
+               if (!mdio_plat) {
+                       dev_err(&pdev->dev,
+                               "cannot find platform device from mdio node");
+                       of_node_put(mdio_node);
+                       err = -EIO;
+                       goto err_mdiobus_init_fail;
+               }
+
+               mdio_data = dev_get_drvdata(&mdio_plat->dev);
+               if (!mdio_data) {
+                       dev_err(&pdev->dev,
+                               "cannot get mii bus reference from device data");
+                       of_node_put(mdio_node);
+                       err = -EIO;
+                       goto err_mdiobus_init_fail;
+               }
+
+               miibus = mdio_data->mii_bus;
+       }
+
+       for_each_available_child_of_node(np, pnp) {
+               const char *mac_addr;
+
+               /* this check is needed if parent and daughter dts have
+                * different number of gmac nodes
+                */
+               if (idx_mac == edma_cinfo->num_gmac) {
+                       of_node_put(np);
+                       break;
+               }
+
+               mac_addr = of_get_mac_address(pnp);
+               if (mac_addr)
+                       memcpy(edma_netdev[idx_mac]->dev_addr, mac_addr, ETH_ALEN);
+
+               idx_mac++;
+       }
+
+       /* Populate the adapter structure register the netdevice */
+       for (i = 0; i < edma_cinfo->num_gmac; i++) {
+               int k, m;
+
+               adapter[i] = netdev_priv(edma_netdev[i]);
+               adapter[i]->netdev = edma_netdev[i];
+               adapter[i]->pdev = pdev;
+               for (j = 0; j < CONFIG_NR_CPUS; j++) {
+                       m = i % 2;
+                       adapter[i]->tx_start_offset[j] =
+                               ((j << EDMA_TX_CPU_START_SHIFT) + (m << 1));
+                       /* Share the queues with available net-devices.
+                        * For instance , with 5 net-devices
+                        * eth0/eth2/eth4 will share q0,q1,q4,q5,q8,q9,q12,q13
+                        * and eth1/eth3 will get the remaining.
+                        */
+                       for (k = adapter[i]->tx_start_offset[j]; k <
+                            (adapter[i]->tx_start_offset[j] + 2); k++) {
+                               if (edma_fill_netdev(edma_cinfo, k, i, j)) {
+                                       pr_err("Netdev overflow Error\n");
+                                       goto err_register;
+                               }
+                       }
+               }
+
+               adapter[i]->edma_cinfo = edma_cinfo;
+               edma_netdev[i]->netdev_ops = &edma_axi_netdev_ops;
+               edma_netdev[i]->max_mtu = 9000;
+               edma_netdev[i]->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM
+                                     | NETIF_F_HW_VLAN_CTAG_TX
+                                     | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_SG |
+                                     NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GRO;
+               edma_netdev[i]->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
+                               NETIF_F_HW_VLAN_CTAG_RX
+                               | NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
+                               NETIF_F_GRO;
+               edma_netdev[i]->vlan_features = NETIF_F_HW_CSUM | NETIF_F_SG |
+                                          NETIF_F_TSO | NETIF_F_TSO6 |
+                                          NETIF_F_GRO;
+               edma_netdev[i]->wanted_features = NETIF_F_HW_CSUM | NETIF_F_SG |
+                                            NETIF_F_TSO | NETIF_F_TSO6 |
+                                            NETIF_F_GRO;
+
+#ifdef CONFIG_RFS_ACCEL
+               edma_netdev[i]->features |=  NETIF_F_RXHASH | NETIF_F_NTUPLE;
+               edma_netdev[i]->hw_features |=  NETIF_F_RXHASH | NETIF_F_NTUPLE;
+               edma_netdev[i]->vlan_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
+               edma_netdev[i]->wanted_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
+#endif
+               edma_set_ethtool_ops(edma_netdev[i]);
+
+               /* This just fill in some default MAC address
+                */
+               if (!is_valid_ether_addr(edma_netdev[i]->dev_addr)) {
+                       random_ether_addr(edma_netdev[i]->dev_addr);
+                       pr_info("EDMA using MAC@ - using");
+                       pr_info("%02x:%02x:%02x:%02x:%02x:%02x\n",
+                       *(edma_netdev[i]->dev_addr),
+                       *(edma_netdev[i]->dev_addr + 1),
+                       *(edma_netdev[i]->dev_addr + 2),
+                       *(edma_netdev[i]->dev_addr + 3),
+                       *(edma_netdev[i]->dev_addr + 4),
+                       *(edma_netdev[i]->dev_addr + 5));
+               }
+
+               err = register_netdev(edma_netdev[i]);
+               if (err)
+                       goto err_register;
+
+               /* carrier off reporting is important to
+                * ethtool even BEFORE open
+                */
+               netif_carrier_off(edma_netdev[i]);
+
+               /* Allocate reverse irq cpu mapping structure for
+               * receive queues
+               */
+#ifdef CONFIG_RFS_ACCEL
+               edma_netdev[i]->rx_cpu_rmap =
+                       alloc_irq_cpu_rmap(EDMA_NETDEV_RX_QUEUE);
+               if (!edma_netdev[i]->rx_cpu_rmap) {
+                       err = -ENOMEM;
+                       goto err_rmap_alloc_fail;
+               }
+#endif
+       }
+
+       for (i = 0; i < EDMA_MAX_PORTID_BITMAP_INDEX; i++)
+               edma_cinfo->portid_netdev_lookup_tbl[i] = NULL;
+
+       for_each_available_child_of_node(np, pnp) {
+               const uint32_t *vlan_tag = NULL;
+               int len;
+
+               /* this check is needed if parent and daughter dts have
+                * different number of gmac nodes
+                */
+               if (idx == edma_cinfo->num_gmac)
+                       break;
+
+               /* Populate port-id to netdev lookup table */
+               vlan_tag = of_get_property(pnp, "vlan_tag", &len);
+               if (!vlan_tag) {
+                       pr_err("Vlan tag parsing Failed.\n");
+                       goto err_rmap_alloc_fail;
+               }
+
+               adapter[idx]->default_vlan_tag = of_read_number(vlan_tag, 1);
+               vlan_tag++;
+               portid_bmp = of_read_number(vlan_tag, 1);
+               adapter[idx]->dp_bitmap = portid_bmp;
+
+               portid_bmp = portid_bmp >> 1; /* We ignore CPU Port bit 0 */
+               while (portid_bmp) {
+                       int port_bit = ffs(portid_bmp);
+
+                       if (port_bit > EDMA_MAX_PORTID_SUPPORTED)
+                               goto err_rmap_alloc_fail;
+                       edma_cinfo->portid_netdev_lookup_tbl[port_bit] =
+                               edma_netdev[idx];
+                       portid_bmp &= ~(1 << (port_bit - 1));
+               }
+
+               if (!of_property_read_u32(pnp, "qcom,poll_required",
+                                         &adapter[idx]->poll_required)) {
+                       if (adapter[idx]->poll_required) {
+                               of_property_read_u32(pnp, "qcom,phy_mdio_addr",
+                                                    &adapter[idx]->phy_mdio_addr);
+                               of_property_read_u32(pnp, "qcom,forced_speed",
+                                                    &adapter[idx]->forced_speed);
+                               of_property_read_u32(pnp, "qcom,forced_duplex",
+                                                    &adapter[idx]->forced_duplex);
+
+                               /* create a phyid using MDIO bus id
+                                * and MDIO bus address
+                                */
+                               snprintf(adapter[idx]->phy_id,
+                                        MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
+                                        miibus->id,
+                                        adapter[idx]->phy_mdio_addr);
+                       }
+               } else {
+                       adapter[idx]->poll_required = 0;
+                       adapter[idx]->forced_speed = SPEED_1000;
+                       adapter[idx]->forced_duplex = DUPLEX_FULL;
+               }
+
+               idx++;
+       }
+
+       edma_cinfo->edma_ctl_table_hdr = register_net_sysctl(&init_net,
+                                                            "net/edma",
+                                                            edma_table);
+       if (!edma_cinfo->edma_ctl_table_hdr) {
+               dev_err(&pdev->dev, "edma sysctl table hdr not registered\n");
+               goto err_unregister_sysctl_tbl;
+       }
+
+       /* Disable all 16 Tx and 8 rx irqs */
+       edma_irq_disable(edma_cinfo);
+
+       err = edma_reset(edma_cinfo);
+       if (err) {
+               err = -EIO;
+               goto err_reset;
+       }
+
+       /* populate per_core_info, do a napi_Add, request 16 TX irqs,
+        * 8 RX irqs, do a napi enable
+        */
+       for (i = 0; i < CONFIG_NR_CPUS; i++) {
+               u8 rx_start;
+
+               edma_cinfo->edma_percpu_info[i].napi.state = 0;
+
+               netif_napi_add(edma_netdev[0],
+                              &edma_cinfo->edma_percpu_info[i].napi,
+                              edma_poll, 64);
+               napi_enable(&edma_cinfo->edma_percpu_info[i].napi);
+               edma_cinfo->edma_percpu_info[i].tx_mask = tx_mask[i];
+               edma_cinfo->edma_percpu_info[i].rx_mask = EDMA_RX_PER_CPU_MASK
+                               << (i << EDMA_RX_PER_CPU_MASK_SHIFT);
+               edma_cinfo->edma_percpu_info[i].tx_start = tx_start[i];
+               edma_cinfo->edma_percpu_info[i].rx_start =
+                       i << EDMA_RX_CPU_START_SHIFT;
+               rx_start = i << EDMA_RX_CPU_START_SHIFT;
+               edma_cinfo->edma_percpu_info[i].tx_status = 0;
+               edma_cinfo->edma_percpu_info[i].rx_status = 0;
+               edma_cinfo->edma_percpu_info[i].edma_cinfo = edma_cinfo;
+
+               /* Request irq per core */
+               for (j = edma_cinfo->edma_percpu_info[i].tx_start;
+                    j < tx_start[i] + 4; j++) {
+                       sprintf(&edma_tx_irq[j][0], "edma_eth_tx%d", j);
+                       err = request_irq(edma_cinfo->tx_irq[j],
+                                         edma_interrupt,
+                                         0,
+                                         &edma_tx_irq[j][0],
+                                         &edma_cinfo->edma_percpu_info[i]);
+                       if (err)
+                               goto err_reset;
+               }
+
+               for (j = edma_cinfo->edma_percpu_info[i].rx_start;
+                    j < (rx_start +
+                    ((edma_cinfo->num_rx_queues == 4) ? 1 : 2));
+                    j++) {
+                       sprintf(&edma_rx_irq[j][0], "edma_eth_rx%d", j);
+                       err = request_irq(edma_cinfo->rx_irq[j],
+                                         edma_interrupt,
+                                         0,
+                                         &edma_rx_irq[j][0],
+                                         &edma_cinfo->edma_percpu_info[i]);
+                       if (err)
+                               goto err_reset;
+               }
+
+#ifdef CONFIG_RFS_ACCEL
+               for (j = edma_cinfo->edma_percpu_info[i].rx_start;
+                    j < rx_start + 2; j += 2) {
+                       err = irq_cpu_rmap_add(edma_netdev[0]->rx_cpu_rmap,
+                                              edma_cinfo->rx_irq[j]);
+                       if (err)
+                               goto err_rmap_add_fail;
+               }
+#endif
+       }
+
+       /* Used to clear interrupt status, allocate rx buffer,
+        * configure edma descriptors registers
+        */
+       err = edma_configure(edma_cinfo);
+       if (err) {
+               err = -EIO;
+               goto err_configure;
+       }
+
+       /* Configure RSS indirection table.
+        * 128 hash will be configured in the following
+        * pattern: hash{0,1,2,3} = {Q0,Q2,Q4,Q6} respectively
+        * and so on
+        */
+       for (i = 0; i < EDMA_NUM_IDT; i++)
+               edma_write_reg(EDMA_REG_RSS_IDT(i), EDMA_RSS_IDT_VALUE);
+
+       /* Configure load balance mapping table.
+        * 4 table entry will be configured according to the
+        * following pattern: load_balance{0,1,2,3} = {Q0,Q1,Q3,Q4}
+        * respectively.
+        */
+       edma_write_reg(EDMA_REG_LB_RING, EDMA_LB_REG_VALUE);
+
+       /* Configure Virtual queue for Tx rings
+        * User can also change this value runtime through
+        * a sysctl
+        */
+       edma_write_reg(EDMA_REG_VQ_CTRL0, EDMA_VQ_REG_VALUE);
+       edma_write_reg(EDMA_REG_VQ_CTRL1, EDMA_VQ_REG_VALUE);
+
+       /* Configure Max AXI Burst write size to 128 bytes*/
+       edma_write_reg(EDMA_REG_AXIW_CTRL_MAXWRSIZE,
+                      EDMA_AXIW_MAXWRSIZE_VALUE);
+
+       /* Enable All 16 tx and 8 rx irq mask */
+       edma_irq_enable(edma_cinfo);
+       edma_enable_tx_ctrl(&edma_cinfo->hw);
+       edma_enable_rx_ctrl(&edma_cinfo->hw);
+
+       for (i = 0; i < edma_cinfo->num_gmac; i++) {
+               if (adapter[i]->poll_required) {
+                       adapter[i]->phydev =
+                               phy_connect(edma_netdev[i],
+                                           (const char *)adapter[i]->phy_id,
+                                           &edma_adjust_link,
+                                           PHY_INTERFACE_MODE_SGMII);
+                       if (IS_ERR(adapter[i]->phydev)) {
+                               dev_dbg(&pdev->dev, "PHY attach FAIL");
+                               err = -EIO;
+                               goto edma_phy_attach_fail;
+                       } else {
+                               adapter[i]->phydev->advertising |=
+                                       ADVERTISED_Pause |
+                                       ADVERTISED_Asym_Pause;
+                               adapter[i]->phydev->supported |=
+                                       SUPPORTED_Pause |
+                                       SUPPORTED_Asym_Pause;
+                       }
+               } else {
+                       adapter[i]->phydev = NULL;
+               }
+       }
+
+       spin_lock_init(&edma_cinfo->stats_lock);
+
+       timer_setup(&edma_cinfo->edma_stats_timer, edma_statistics_timer, 0);
+       mod_timer(&edma_cinfo->edma_stats_timer, jiffies + 1*HZ);
+
+       return 0;
+
+edma_phy_attach_fail:
+       miibus = NULL;
+err_configure:
+#ifdef CONFIG_RFS_ACCEL
+       for (i = 0; i < edma_cinfo->num_gmac; i++) {
+               free_irq_cpu_rmap(adapter[i]->netdev->rx_cpu_rmap);
+               adapter[i]->netdev->rx_cpu_rmap = NULL;
+       }
+#endif
+err_rmap_add_fail:
+       edma_free_irqs(adapter[0]);
+       for (i = 0; i < CONFIG_NR_CPUS; i++)
+               napi_disable(&edma_cinfo->edma_percpu_info[i].napi);
+err_reset:
+err_unregister_sysctl_tbl:
+err_rmap_alloc_fail:
+       for (i = 0; i < edma_cinfo->num_gmac; i++)
+               unregister_netdev(edma_netdev[i]);
+err_register:
+err_mdiobus_init_fail:
+       edma_free_rx_rings(edma_cinfo);
+err_rx_rinit:
+       edma_free_tx_rings(edma_cinfo);
+err_tx_rinit:
+       edma_free_queues(edma_cinfo);
+err_rx_qinit:
+err_tx_qinit:
+       iounmap(edma_cinfo->hw.hw_addr);
+err_ioremap:
+       for (i = 0; i < edma_cinfo->num_gmac; i++) {
+               if (edma_netdev[i])
+                       free_netdev(edma_netdev[i]);
+       }
+err_cinfo:
+       kfree(edma_cinfo);
+err_alloc:
+       return err;
+}
+
+/* edma_axi_remove()
+ *     Device Removal Routine
+ *
+ * edma_axi_remove is called by the platform subsystem to alert the driver
+ * that it should release a platform device.
+ */
+static int edma_axi_remove(struct platform_device *pdev)
+{
+       struct edma_adapter *adapter = netdev_priv(edma_netdev[0]);
+       struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
+       struct edma_hw *hw = &edma_cinfo->hw;
+       int i;
+
+       for (i = 0; i < edma_cinfo->num_gmac; i++)
+               unregister_netdev(edma_netdev[i]);
+
+       edma_stop_rx_tx(hw);
+       for (i = 0; i < CONFIG_NR_CPUS; i++)
+               napi_disable(&edma_cinfo->edma_percpu_info[i].napi);
+
+       edma_irq_disable(edma_cinfo);
+       edma_write_reg(EDMA_REG_RX_ISR, 0xff);
+       edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
+#ifdef CONFIG_RFS_ACCEL
+       for (i = 0; i < edma_cinfo->num_gmac; i++) {
+               free_irq_cpu_rmap(edma_netdev[i]->rx_cpu_rmap);
+               edma_netdev[i]->rx_cpu_rmap = NULL;
+       }
+#endif
+
+       for (i = 0; i < edma_cinfo->num_gmac; i++) {
+               struct edma_adapter *adapter = netdev_priv(edma_netdev[i]);
+
+               if (adapter->phydev)
+                       phy_disconnect(adapter->phydev);
+       }
+
+       del_timer_sync(&edma_cinfo->edma_stats_timer);
+       edma_free_irqs(adapter);
+       unregister_net_sysctl_table(edma_cinfo->edma_ctl_table_hdr);
+       edma_free_tx_resources(edma_cinfo);
+       edma_free_rx_resources(edma_cinfo);
+       edma_free_tx_rings(edma_cinfo);
+       edma_free_rx_rings(edma_cinfo);
+       edma_free_queues(edma_cinfo);
+       for (i = 0; i < edma_cinfo->num_gmac; i++)
+               free_netdev(edma_netdev[i]);
+
+       kfree(edma_cinfo);
+
+       return 0;
+}
+
+static const struct of_device_id edma_of_mtable[] = {
+       {.compatible = "qcom,ess-edma" },
+       {}
+};
+MODULE_DEVICE_TABLE(of, edma_of_mtable);
+
+static struct platform_driver edma_axi_driver = {
+       .driver = {
+               .name    = edma_axi_driver_name,
+               .of_match_table = edma_of_mtable,
+       },
+       .probe    = edma_axi_probe,
+       .remove   = edma_axi_remove,
+};
+
+module_platform_driver(edma_axi_driver);
+
+MODULE_AUTHOR("Qualcomm Atheros Inc");
+MODULE_DESCRIPTION("QCA ESS EDMA driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c
@@ -0,0 +1,374 @@
+/*
+ * Copyright (c) 2015 - 2016, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all copies.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+#include <linux/string.h>
+#include "edma.h"
+
+struct edma_ethtool_stats {
+       uint8_t stat_string[ETH_GSTRING_LEN];
+       uint32_t stat_offset;
+};
+
+#define EDMA_STAT(m)    offsetof(struct edma_ethtool_statistics, m)
+#define DRVINFO_LEN    32
+
+/* Array of strings describing statistics
+ */
+static const struct edma_ethtool_stats edma_gstrings_stats[] = {
+       {"tx_q0_pkt", EDMA_STAT(tx_q0_pkt)},
+       {"tx_q1_pkt", EDMA_STAT(tx_q1_pkt)},
+       {"tx_q2_pkt", EDMA_STAT(tx_q2_pkt)},
+       {"tx_q3_pkt", EDMA_STAT(tx_q3_pkt)},
+       {"tx_q4_pkt", EDMA_STAT(tx_q4_pkt)},
+       {"tx_q5_pkt", EDMA_STAT(tx_q5_pkt)},
+       {"tx_q6_pkt", EDMA_STAT(tx_q6_pkt)},
+       {"tx_q7_pkt", EDMA_STAT(tx_q7_pkt)},
+       {"tx_q8_pkt", EDMA_STAT(tx_q8_pkt)},
+       {"tx_q9_pkt", EDMA_STAT(tx_q9_pkt)},
+       {"tx_q10_pkt", EDMA_STAT(tx_q10_pkt)},
+       {"tx_q11_pkt", EDMA_STAT(tx_q11_pkt)},
+       {"tx_q12_pkt", EDMA_STAT(tx_q12_pkt)},
+       {"tx_q13_pkt", EDMA_STAT(tx_q13_pkt)},
+       {"tx_q14_pkt", EDMA_STAT(tx_q14_pkt)},
+       {"tx_q15_pkt", EDMA_STAT(tx_q15_pkt)},
+       {"tx_q0_byte", EDMA_STAT(tx_q0_byte)},
+       {"tx_q1_byte", EDMA_STAT(tx_q1_byte)},
+       {"tx_q2_byte", EDMA_STAT(tx_q2_byte)},
+       {"tx_q3_byte", EDMA_STAT(tx_q3_byte)},
+       {"tx_q4_byte", EDMA_STAT(tx_q4_byte)},
+       {"tx_q5_byte", EDMA_STAT(tx_q5_byte)},
+       {"tx_q6_byte", EDMA_STAT(tx_q6_byte)},
+       {"tx_q7_byte", EDMA_STAT(tx_q7_byte)},
+       {"tx_q8_byte", EDMA_STAT(tx_q8_byte)},
+       {"tx_q9_byte", EDMA_STAT(tx_q9_byte)},
+       {"tx_q10_byte", EDMA_STAT(tx_q10_byte)},
+       {"tx_q11_byte", EDMA_STAT(tx_q11_byte)},
+       {"tx_q12_byte", EDMA_STAT(tx_q12_byte)},
+       {"tx_q13_byte", EDMA_STAT(tx_q13_byte)},
+       {"tx_q14_byte", EDMA_STAT(tx_q14_byte)},
+       {"tx_q15_byte", EDMA_STAT(tx_q15_byte)},
+       {"rx_q0_pkt", EDMA_STAT(rx_q0_pkt)},
+       {"rx_q1_pkt", EDMA_STAT(rx_q1_pkt)},
+       {"rx_q2_pkt", EDMA_STAT(rx_q2_pkt)},
+       {"rx_q3_pkt", EDMA_STAT(rx_q3_pkt)},
+       {"rx_q4_pkt", EDMA_STAT(rx_q4_pkt)},
+       {"rx_q5_pkt", EDMA_STAT(rx_q5_pkt)},
+       {"rx_q6_pkt", EDMA_STAT(rx_q6_pkt)},
+       {"rx_q7_pkt", EDMA_STAT(rx_q7_pkt)},
+       {"rx_q0_byte", EDMA_STAT(rx_q0_byte)},
+       {"rx_q1_byte", EDMA_STAT(rx_q1_byte)},
+       {"rx_q2_byte", EDMA_STAT(rx_q2_byte)},
+       {"rx_q3_byte", EDMA_STAT(rx_q3_byte)},
+       {"rx_q4_byte", EDMA_STAT(rx_q4_byte)},
+       {"rx_q5_byte", EDMA_STAT(rx_q5_byte)},
+       {"rx_q6_byte", EDMA_STAT(rx_q6_byte)},
+       {"rx_q7_byte", EDMA_STAT(rx_q7_byte)},
+       {"tx_desc_error", EDMA_STAT(tx_desc_error)},
+};
+
+#define EDMA_STATS_LEN ARRAY_SIZE(edma_gstrings_stats)
+
+/* edma_get_strset_count()
+ *     Get strset count
+ */
+static int edma_get_strset_count(struct net_device *netdev,
+                                int sset)
+{
+       switch (sset) {
+       case ETH_SS_STATS:
+               return EDMA_STATS_LEN;
+       default:
+               netdev_dbg(netdev, "%s: Invalid string set", __func__);
+               return -EOPNOTSUPP;
+       }
+}
+
+
+/* edma_get_strings()
+ *     get stats string
+ */
+static void edma_get_strings(struct net_device *netdev, uint32_t stringset,
+                            uint8_t *data)
+{
+       uint8_t *p = data;
+       uint32_t i;
+
+       switch (stringset) {
+       case ETH_SS_STATS:
+               for (i = 0; i < EDMA_STATS_LEN; i++) {
+                       memcpy(p, edma_gstrings_stats[i].stat_string,
+                               min((size_t)ETH_GSTRING_LEN,
+                                   strlen(edma_gstrings_stats[i].stat_string)
+                                   + 1));
+                       p += ETH_GSTRING_LEN;
+               }
+               break;
+       }
+}
+
+/* edma_get_ethtool_stats()
+ *     Get ethtool statistics
+ */
+static void edma_get_ethtool_stats(struct net_device *netdev,
+                                  struct ethtool_stats *stats, uint64_t *data)
+{
+       struct edma_adapter *adapter = netdev_priv(netdev);
+       struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
+       int i;
+       uint8_t *p = NULL;
+
+       edma_read_append_stats(edma_cinfo);
+
+       for(i = 0; i < EDMA_STATS_LEN; i++) {
+               p = (uint8_t *)&(edma_cinfo->edma_ethstats) +
+                       edma_gstrings_stats[i].stat_offset;
+               data[i] = *(uint32_t *)p;
+       }
+}
+
+/* edma_get_drvinfo()
+ *     get edma driver info
+ */
+static void edma_get_drvinfo(struct net_device *dev,
+                            struct ethtool_drvinfo *info)
+{
+       strlcpy(info->driver, "ess_edma", DRVINFO_LEN);
+       strlcpy(info->bus_info, "axi", ETHTOOL_BUSINFO_LEN);
+}
+
+/* edma_nway_reset()
+ *     Reset the phy, if available.
+ */
+static int edma_nway_reset(struct net_device *netdev)
+{
+       return -EINVAL;
+}
+
+/* edma_get_wol()
+ *     get wake on lan info
+ */
+static void edma_get_wol(struct net_device *netdev,
+                        struct ethtool_wolinfo *wol)
+{
+       wol->supported = 0;
+       wol->wolopts = 0;
+}
+
+/* edma_get_msglevel()
+ *     get message level.
+ */
+static uint32_t edma_get_msglevel(struct net_device *netdev)
+{
+       return 0;
+}
+
+/* edma_get_settings()
+ *     Get edma settings
+ */
+static int edma_get_settings(struct net_device *netdev,
+                            struct ethtool_cmd *ecmd)
+{
+       struct edma_adapter *adapter = netdev_priv(netdev);
+
+       if (adapter->poll_required) {
+               struct phy_device *phydev = NULL;
+               uint16_t phyreg;
+
+               if ((adapter->forced_speed != SPEED_UNKNOWN)
+                       && !(adapter->poll_required))
+                       return -EPERM;
+
+               phydev = adapter->phydev;
+
+               ecmd->advertising = phydev->advertising;
+               ecmd->autoneg = phydev->autoneg;
+
+               if (adapter->link_state == __EDMA_LINKDOWN) {
+                       ecmd->speed =  SPEED_UNKNOWN;
+                       ecmd->duplex = DUPLEX_UNKNOWN;
+               } else {
+                       ecmd->speed = phydev->speed;
+                       ecmd->duplex = phydev->duplex;
+               }
+
+               ecmd->phy_address = adapter->phy_mdio_addr;
+
+               phyreg = (uint16_t)phy_read(adapter->phydev, MII_LPA);
+               if (phyreg & LPA_10HALF)
+                       ecmd->lp_advertising |= ADVERTISED_10baseT_Half;
+
+               if (phyreg & LPA_10FULL)
+                       ecmd->lp_advertising |= ADVERTISED_10baseT_Full;
+
+               if (phyreg & LPA_100HALF)
+                       ecmd->lp_advertising |= ADVERTISED_100baseT_Half;
+
+               if (phyreg & LPA_100FULL)
+                       ecmd->lp_advertising |= ADVERTISED_100baseT_Full;
+
+               phyreg = (uint16_t)phy_read(adapter->phydev, MII_STAT1000);
+               if (phyreg & LPA_1000HALF)
+                       ecmd->lp_advertising |= ADVERTISED_1000baseT_Half;
+
+               if (phyreg & LPA_1000FULL)
+                       ecmd->lp_advertising |= ADVERTISED_1000baseT_Full;
+       } else {
+               /* If the speed/duplex for this GMAC is forced and we
+                * are not polling for link state changes, return the
+                * values as specified by platform. This will be true
+                * for GMACs connected to switch, and interfaces that
+                * do not use a PHY.
+                */
+               if (!(adapter->poll_required)) {
+                       if (adapter->forced_speed != SPEED_UNKNOWN) {
+                               /* set speed and duplex */
+                               ethtool_cmd_speed_set(ecmd, SPEED_1000);
+                               ecmd->duplex = DUPLEX_FULL;
+
+                               /* Populate capabilities advertised by self */
+                               ecmd->advertising = 0;
+                               ecmd->autoneg = 0;
+                               ecmd->port = PORT_TP;
+                               ecmd->transceiver = XCVR_EXTERNAL;
+                       } else {
+                               /* non link polled and non
+                                * forced speed/duplex interface
+                                */
+                               return -EIO;
+                       }
+               }
+       }
+
+       return 0;
+}
+
+/* edma_set_settings()
+ *     Set EDMA settings
+ */
+static int edma_set_settings(struct net_device *netdev,
+                            struct ethtool_cmd *ecmd)
+{
+       struct edma_adapter *adapter = netdev_priv(netdev);
+       struct phy_device *phydev = NULL;
+
+       if ((adapter->forced_speed != SPEED_UNKNOWN) &&
+            !adapter->poll_required)
+               return -EPERM;
+
+       phydev = adapter->phydev;
+       phydev->advertising = ecmd->advertising;
+       phydev->autoneg = ecmd->autoneg;
+       phydev->speed = ethtool_cmd_speed(ecmd);
+       phydev->duplex = ecmd->duplex;
+
+       genphy_config_aneg(phydev);
+
+       return 0;
+}
+
+/* edma_get_coalesce
+ *     get interrupt mitigation
+ */
+static int edma_get_coalesce(struct net_device *netdev,
+                            struct ethtool_coalesce *ec)
+{
+       u32 reg_val;
+
+       edma_get_tx_rx_coalesce(&reg_val);
+
+       /* We read the Interrupt Moderation Timer(IMT) register value,
+        * use lower 16 bit for rx and higher 16 bit for Tx. We do a
+        * left shift by 1, because IMT resolution timer is 2usecs.
+        * Hence the value given by the register is multiplied by 2 to
+        * get the actual time in usecs.
+        */
+       ec->tx_coalesce_usecs = (((reg_val >> 16) & 0xffff) << 1);
+       ec->rx_coalesce_usecs = ((reg_val & 0xffff) << 1);
+
+       return 0;
+}
+
+/* edma_set_coalesce
+ *     set interrupt mitigation
+ */
+static int edma_set_coalesce(struct net_device *netdev,
+                            struct ethtool_coalesce *ec)
+{
+       if (ec->tx_coalesce_usecs)
+               edma_change_tx_coalesce(ec->tx_coalesce_usecs);
+       if (ec->rx_coalesce_usecs)
+               edma_change_rx_coalesce(ec->rx_coalesce_usecs);
+
+       return 0;
+}
+
+/* edma_set_priv_flags()
+ *     Set EDMA private flags
+ */
+static int edma_set_priv_flags(struct net_device *netdev, u32 flags)
+{
+       return 0;
+}
+
+/* edma_get_priv_flags()
+ *     get edma driver flags
+ */
+static u32 edma_get_priv_flags(struct net_device *netdev)
+{
+       return 0;
+}
+
+/* edma_get_ringparam()
+ *     get ring size
+ */
+static void edma_get_ringparam(struct net_device *netdev,
+                              struct ethtool_ringparam *ring)
+{
+       struct edma_adapter *adapter = netdev_priv(netdev);
+       struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
+
+       ring->tx_max_pending = edma_cinfo->tx_ring_count;
+       ring->rx_max_pending = edma_cinfo->rx_ring_count;
+}
+
+/* Ethtool operations
+ */
+static const struct ethtool_ops edma_ethtool_ops = {
+       .get_drvinfo = &edma_get_drvinfo,
+       .get_link = &ethtool_op_get_link,
+       .get_msglevel = &edma_get_msglevel,
+       .nway_reset = &edma_nway_reset,
+       .get_wol = &edma_get_wol,
+       .get_settings = &edma_get_settings,
+       .set_settings = &edma_set_settings,
+       .get_strings = &edma_get_strings,
+       .get_sset_count = &edma_get_strset_count,
+       .get_ethtool_stats = &edma_get_ethtool_stats,
+       .get_coalesce = &edma_get_coalesce,
+       .set_coalesce = &edma_set_coalesce,
+       .get_priv_flags = edma_get_priv_flags,
+       .set_priv_flags = edma_set_priv_flags,
+       .get_ringparam = edma_get_ringparam,
+};
+
+/* edma_set_ethtool_ops
+ *     Set ethtool operations
+ */
+void edma_set_ethtool_ops(struct net_device *netdev)
+{
+       netdev->ethtool_ops = &edma_ethtool_ops;
+}
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/essedma/ess_edma.h
@@ -0,0 +1,332 @@
+/*
+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all copies.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _ESS_EDMA_H_
+#define _ESS_EDMA_H_
+
+#include <linux/types.h>
+
+struct edma_adapter;
+struct edma_hw;
+
+/* register definition */
+#define EDMA_REG_MAS_CTRL 0x0
+#define EDMA_REG_TIMEOUT_CTRL 0x004
+#define EDMA_REG_DBG0 0x008
+#define EDMA_REG_DBG1 0x00C
+#define EDMA_REG_SW_CTRL0 0x100
+#define EDMA_REG_SW_CTRL1 0x104
+
+/* Interrupt Status Register */
+#define EDMA_REG_RX_ISR 0x200
+#define EDMA_REG_TX_ISR 0x208
+#define EDMA_REG_MISC_ISR 0x210
+#define EDMA_REG_WOL_ISR 0x218
+
+#define EDMA_MISC_ISR_RX_URG_Q(x) (1 << x)
+
+#define EDMA_MISC_ISR_AXIR_TIMEOUT 0x00000100
+#define EDMA_MISC_ISR_AXIR_ERR 0x00000200
+#define EDMA_MISC_ISR_TXF_DEAD 0x00000400
+#define EDMA_MISC_ISR_AXIW_ERR 0x00000800
+#define EDMA_MISC_ISR_AXIW_TIMEOUT 0x00001000
+
+#define EDMA_WOL_ISR 0x00000001
+
+/* Interrupt Mask Register */
+#define EDMA_REG_MISC_IMR 0x214
+#define EDMA_REG_WOL_IMR 0x218
+
+#define EDMA_RX_IMR_NORMAL_MASK 0x1
+#define EDMA_TX_IMR_NORMAL_MASK 0x1
+#define EDMA_MISC_IMR_NORMAL_MASK 0x80001FFF
+#define EDMA_WOL_IMR_NORMAL_MASK 0x1
+
+/* Edma receive consumer index */
+#define EDMA_REG_RX_SW_CONS_IDX_Q(x) (0x220 + ((x) << 2)) /* x is the queue id */
+/* Edma transmit consumer index */
+#define EDMA_REG_TX_SW_CONS_IDX_Q(x) (0x240 + ((x) << 2)) /* x is the queue id */
+
+/* IRQ Moderator Initial Timer Register */
+#define EDMA_REG_IRQ_MODRT_TIMER_INIT 0x280
+#define EDMA_IRQ_MODRT_TIMER_MASK 0xFFFF
+#define EDMA_IRQ_MODRT_RX_TIMER_SHIFT 0
+#define EDMA_IRQ_MODRT_TX_TIMER_SHIFT 16
+
+/* Interrupt Control Register */
+#define EDMA_REG_INTR_CTRL 0x284
+#define EDMA_INTR_CLR_TYP_SHIFT 0
+#define EDMA_INTR_SW_IDX_W_TYP_SHIFT 1
+#define EDMA_INTR_CLEAR_TYPE_W1 0
+#define EDMA_INTR_CLEAR_TYPE_R 1
+
+/* RX Interrupt Mask Register */
+#define EDMA_REG_RX_INT_MASK_Q(x) (0x300 + ((x) << 2)) /* x = queue id */
+
+/* TX Interrupt mask register */
+#define EDMA_REG_TX_INT_MASK_Q(x) (0x340 + ((x) << 2)) /* x = queue id */
+
+/* Load Ptr Register
+ * Software sets this bit after the initialization of the head and tail
+ */
+#define EDMA_REG_TX_SRAM_PART 0x400
+#define EDMA_LOAD_PTR_SHIFT 16
+
+/* TXQ Control Register */
+#define EDMA_REG_TXQ_CTRL 0x404
+#define EDMA_TXQ_CTRL_IP_OPTION_EN 0x10
+#define EDMA_TXQ_CTRL_TXQ_EN 0x20
+#define EDMA_TXQ_CTRL_ENH_MODE 0x40
+#define EDMA_TXQ_CTRL_LS_8023_EN 0x80
+#define EDMA_TXQ_CTRL_TPD_BURST_EN 0x100
+#define EDMA_TXQ_CTRL_LSO_BREAK_EN 0x200
+#define EDMA_TXQ_NUM_TPD_BURST_MASK 0xF
+#define EDMA_TXQ_TXF_BURST_NUM_MASK 0xFFFF
+#define EDMA_TXQ_NUM_TPD_BURST_SHIFT 0
+#define EDMA_TXQ_TXF_BURST_NUM_SHIFT 16
+
+#define        EDMA_REG_TXF_WATER_MARK 0x408 /* In 8-bytes */
+#define EDMA_TXF_WATER_MARK_MASK 0x0FFF
+#define EDMA_TXF_LOW_WATER_MARK_SHIFT 0
+#define EDMA_TXF_HIGH_WATER_MARK_SHIFT 16
+#define EDMA_TXQ_CTRL_BURST_MODE_EN 0x80000000
+
+/* WRR Control Register */
+#define EDMA_REG_WRR_CTRL_Q0_Q3 0x40c
+#define EDMA_REG_WRR_CTRL_Q4_Q7 0x410
+#define EDMA_REG_WRR_CTRL_Q8_Q11 0x414
+#define EDMA_REG_WRR_CTRL_Q12_Q15 0x418
+
+/* Weight round robin(WRR), it takes queue as input, and computes
+ * starting bits where we need to write the weight for a particular
+ * queue
+ */
+#define EDMA_WRR_SHIFT(x) (((x) * 5) % 20)
+
+/* Tx Descriptor Control Register */
+#define EDMA_REG_TPD_RING_SIZE 0x41C
+#define EDMA_TPD_RING_SIZE_SHIFT 0
+#define EDMA_TPD_RING_SIZE_MASK 0xFFFF
+
+/* Transmit descriptor base address */
+#define EDMA_REG_TPD_BASE_ADDR_Q(x) (0x420 + ((x) << 2)) /* x = queue id */
+
+/* TPD Index Register */
+#define EDMA_REG_TPD_IDX_Q(x) (0x460 + ((x) << 2)) /* x = queue id */
+
+#define EDMA_TPD_PROD_IDX_BITS 0x0000FFFF
+#define EDMA_TPD_CONS_IDX_BITS 0xFFFF0000
+#define EDMA_TPD_PROD_IDX_MASK 0xFFFF
+#define EDMA_TPD_CONS_IDX_MASK 0xFFFF
+#define EDMA_TPD_PROD_IDX_SHIFT 0
+#define EDMA_TPD_CONS_IDX_SHIFT 16
+
+/* TX Virtual Queue Mapping Control Register */
+#define EDMA_REG_VQ_CTRL0 0x4A0
+#define EDMA_REG_VQ_CTRL1 0x4A4
+
+/* Virtual QID shift, it takes queue as input, and computes
+ * Virtual QID position in virtual qid control register
+ */
+#define EDMA_VQ_ID_SHIFT(i) (((i) * 3) % 24)
+
+/* Virtual Queue Default Value */
+#define EDMA_VQ_REG_VALUE 0x240240
+
+/* Tx side Port Interface Control Register */
+#define EDMA_REG_PORT_CTRL 0x4A8
+#define EDMA_PAD_EN_SHIFT 15
+
+/* Tx side VLAN Configuration Register */
+#define EDMA_REG_VLAN_CFG 0x4AC
+
+#define EDMA_TX_CVLAN 16
+#define EDMA_TX_INS_CVLAN 17
+#define EDMA_TX_CVLAN_TAG_SHIFT 0
+
+#define EDMA_TX_SVLAN 14
+#define EDMA_TX_INS_SVLAN 15
+#define EDMA_TX_SVLAN_TAG_SHIFT 16
+
+/* Tx Queue Packet Statistic Register */
+#define EDMA_REG_TX_STAT_PKT_Q(x) (0x700 + ((x) << 3)) /* x = queue id */
+
+#define EDMA_TX_STAT_PKT_MASK 0xFFFFFF
+
+/* Tx Queue Byte Statistic Register */
+#define EDMA_REG_TX_STAT_BYTE_Q(x) (0x704 + ((x) << 3)) /* x = queue id */
+
+/* Load Balance Based Ring Offset Register */
+#define EDMA_REG_LB_RING 0x800
+#define EDMA_LB_RING_ENTRY_MASK 0xff
+#define EDMA_LB_RING_ID_MASK 0x7
+#define EDMA_LB_RING_PROFILE_ID_MASK 0x3
+#define EDMA_LB_RING_ENTRY_BIT_OFFSET 8
+#define EDMA_LB_RING_ID_OFFSET 0
+#define EDMA_LB_RING_PROFILE_ID_OFFSET 3
+#define EDMA_LB_REG_VALUE 0x6040200
+
+/* Load Balance Priority Mapping Register */
+#define EDMA_REG_LB_PRI_START 0x804
+#define EDMA_REG_LB_PRI_END 0x810
+#define EDMA_LB_PRI_REG_INC 4
+#define EDMA_LB_PRI_ENTRY_BIT_OFFSET 4
+#define EDMA_LB_PRI_ENTRY_MASK 0xf
+
+/* RSS Priority Mapping Register */
+#define EDMA_REG_RSS_PRI 0x820
+#define EDMA_RSS_PRI_ENTRY_MASK 0xf
+#define EDMA_RSS_RING_ID_MASK 0x7
+#define EDMA_RSS_PRI_ENTRY_BIT_OFFSET 4
+
+/* RSS Indirection Register */
+#define EDMA_REG_RSS_IDT(x) (0x840 + ((x) << 2)) /* x = No. of indirection table */
+#define EDMA_NUM_IDT 16
+#define EDMA_RSS_IDT_VALUE 0x64206420
+
+/* Default RSS Ring Register */
+#define EDMA_REG_DEF_RSS 0x890
+#define EDMA_DEF_RSS_MASK 0x7
+
+/* RSS Hash Function Type Register */
+#define EDMA_REG_RSS_TYPE 0x894
+#define EDMA_RSS_TYPE_NONE 0x01
+#define EDMA_RSS_TYPE_IPV4TCP 0x02
+#define EDMA_RSS_TYPE_IPV6_TCP 0x04
+#define EDMA_RSS_TYPE_IPV4_UDP 0x08
+#define EDMA_RSS_TYPE_IPV6UDP 0x10
+#define EDMA_RSS_TYPE_IPV4 0x20
+#define EDMA_RSS_TYPE_IPV6 0x40
+#define EDMA_RSS_HASH_MODE_MASK 0x7f
+
+#define EDMA_REG_RSS_HASH_VALUE 0x8C0
+
+#define EDMA_REG_RSS_TYPE_RESULT 0x8C4
+
+#define EDMA_HASH_TYPE_START 0
+#define EDMA_HASH_TYPE_END 5
+#define EDMA_HASH_TYPE_SHIFT 12
+
+#define EDMA_RFS_FLOW_ENTRIES 1024
+#define EDMA_RFS_FLOW_ENTRIES_MASK (EDMA_RFS_FLOW_ENTRIES - 1)
+#define EDMA_RFS_EXPIRE_COUNT_PER_CALL 128
+
+/* RFD Base Address Register */
+#define EDMA_REG_RFD_BASE_ADDR_Q(x) (0x950 + ((x) << 2)) /* x = queue id */
+
+/* RFD Index Register */
+#define EDMA_REG_RFD_IDX_Q(x) (0x9B0 + ((x) << 2))
+
+#define EDMA_RFD_PROD_IDX_BITS 0x00000FFF
+#define EDMA_RFD_CONS_IDX_BITS 0x0FFF0000
+#define EDMA_RFD_PROD_IDX_MASK 0xFFF
+#define EDMA_RFD_CONS_IDX_MASK 0xFFF
+#define EDMA_RFD_PROD_IDX_SHIFT 0
+#define EDMA_RFD_CONS_IDX_SHIFT 16
+
+/* Rx Descriptor Control Register */
+#define EDMA_REG_RX_DESC0 0xA10
+#define EDMA_RFD_RING_SIZE_MASK 0xFFF
+#define EDMA_RX_BUF_SIZE_MASK 0xFFFF
+#define EDMA_RFD_RING_SIZE_SHIFT 0
+#define EDMA_RX_BUF_SIZE_SHIFT 16
+
+#define EDMA_REG_RX_DESC1 0xA14
+#define EDMA_RXQ_RFD_BURST_NUM_MASK 0x3F
+#define EDMA_RXQ_RFD_PF_THRESH_MASK 0x1F
+#define EDMA_RXQ_RFD_LOW_THRESH_MASK 0xFFF
+#define EDMA_RXQ_RFD_BURST_NUM_SHIFT 0
+#define EDMA_RXQ_RFD_PF_THRESH_SHIFT 8
+#define EDMA_RXQ_RFD_LOW_THRESH_SHIFT 16
+
+/* RXQ Control Register */
+#define EDMA_REG_RXQ_CTRL 0xA18
+#define EDMA_FIFO_THRESH_TYPE_SHIF 0
+#define EDMA_FIFO_THRESH_128_BYTE 0x0
+#define EDMA_FIFO_THRESH_64_BYTE 0x1
+#define EDMA_RXQ_CTRL_RMV_VLAN 0x00000002
+#define EDMA_RXQ_CTRL_EN 0x0000FF00
+
+/* AXI Burst Size Config */
+#define EDMA_REG_AXIW_CTRL_MAXWRSIZE 0xA1C
+#define EDMA_AXIW_MAXWRSIZE_VALUE 0x0
+
+/* Rx Statistics Register */
+#define EDMA_REG_RX_STAT_BYTE_Q(x) (0xA30 + ((x) << 2)) /* x = queue id */
+#define EDMA_REG_RX_STAT_PKT_Q(x) (0xA50 + ((x) << 2)) /* x = queue id */
+
+/* WoL Pattern Length Register */
+#define EDMA_REG_WOL_PATTERN_LEN0 0xC00
+#define EDMA_WOL_PT_LEN_MASK 0xFF
+#define EDMA_WOL_PT0_LEN_SHIFT 0
+#define EDMA_WOL_PT1_LEN_SHIFT 8
+#define EDMA_WOL_PT2_LEN_SHIFT 16
+#define EDMA_WOL_PT3_LEN_SHIFT 24
+
+#define EDMA_REG_WOL_PATTERN_LEN1 0xC04
+#define EDMA_WOL_PT4_LEN_SHIFT 0
+#define EDMA_WOL_PT5_LEN_SHIFT 8
+#define EDMA_WOL_PT6_LEN_SHIFT 16
+
+/* WoL Control Register */
+#define EDMA_REG_WOL_CTRL 0xC08
+#define EDMA_WOL_WK_EN 0x00000001
+#define EDMA_WOL_MG_EN 0x00000002
+#define EDMA_WOL_PT0_EN 0x00000004
+#define EDMA_WOL_PT1_EN 0x00000008
+#define EDMA_WOL_PT2_EN 0x00000010
+#define EDMA_WOL_PT3_EN 0x00000020
+#define EDMA_WOL_PT4_EN 0x00000040
+#define EDMA_WOL_PT5_EN 0x00000080
+#define EDMA_WOL_PT6_EN 0x00000100
+
+/* MAC Control Register */
+#define EDMA_REG_MAC_CTRL0 0xC20
+#define EDMA_REG_MAC_CTRL1 0xC24
+
+/* WoL Pattern Register */
+#define EDMA_REG_WOL_PATTERN_START 0x5000
+#define EDMA_PATTERN_PART_REG_OFFSET 0x40
+
+
+/* TX descriptor fields */
+#define EDMA_TPD_HDR_SHIFT 0
+#define EDMA_TPD_PPPOE_EN 0x00000100
+#define EDMA_TPD_IP_CSUM_EN 0x00000200
+#define EDMA_TPD_TCP_CSUM_EN 0x0000400
+#define EDMA_TPD_UDP_CSUM_EN 0x00000800
+#define EDMA_TPD_CUSTOM_CSUM_EN 0x00000C00
+#define EDMA_TPD_LSO_EN 0x00001000
+#define EDMA_TPD_LSO_V2_EN 0x00002000
+#define EDMA_TPD_IPV4_EN 0x00010000
+#define EDMA_TPD_MSS_MASK 0x1FFF
+#define EDMA_TPD_MSS_SHIFT 18
+#define EDMA_TPD_CUSTOM_CSUM_SHIFT 18
+
+/* RRD descriptor fields */
+#define EDMA_RRD_NUM_RFD_MASK 0x000F
+#define EDMA_RRD_SVLAN 0x8000
+#define EDMA_RRD_FLOW_COOKIE_MASK 0x07FF;
+
+#define EDMA_RRD_PKT_SIZE_MASK 0x3FFF
+#define EDMA_RRD_CSUM_FAIL_MASK 0xC000
+#define EDMA_RRD_CVLAN 0x0001
+#define EDMA_RRD_DESC_VALID 0x8000
+
+#define EDMA_RRD_PRIORITY_SHIFT 4
+#define EDMA_RRD_PRIORITY_MASK 0x7
+#define EDMA_RRD_PORT_TYPE_SHIFT 7
+#define EDMA_RRD_PORT_TYPE_MASK 0x1F
+#endif /* _ESS_EDMA_H_ */

Generated by GNU Enscript 1.6.5.90.