OpenWrt – Rev 1
?pathlinks?
From 364123029d8d547336323fbd3d659ecd0bba913f Mon Sep 17 00:00:00 2001
From: Matthew McClintock <mmcclint@codeaurora.org>
Date: Mon, 23 Jul 2018 08:41:02 +0200
Subject: [PATCH 5/8] qcom: ipq4019: use v2 of the kpss bringup mechanism
v1 was the incorrect choice here and sometimes the board
would not come up properly.
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -34,7 +34,8 @@
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
reg = <0x0>;
@@ -53,7 +54,8 @@
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
reg = <0x1>;
@@ -64,7 +66,8 @@
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc2>;
qcom,saw = <&saw2>;
reg = <0x2>;
@@ -75,13 +78,20 @@
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc3>;
qcom,saw = <&saw3>;
reg = <0x3>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
};
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ qcom,saw = <&saw_l2>;
+ };
};
pmu {
@@ -213,22 +223,22 @@
};
acc0: clock-controller@b088000 {
- compatible = "qcom,kpss-acc-v1";
+ compatible = "qcom,kpss-acc-v2";
reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
};
acc1: clock-controller@b098000 {
- compatible = "qcom,kpss-acc-v1";
+ compatible = "qcom,kpss-acc-v2";
reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
};
acc2: clock-controller@b0a8000 {
- compatible = "qcom,kpss-acc-v1";
+ compatible = "qcom,kpss-acc-v2";
reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
};
acc3: clock-controller@b0b8000 {
- compatible = "qcom,kpss-acc-v1";
+ compatible = "qcom,kpss-acc-v2";
reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
};
@@ -256,6 +266,12 @@
regulator;
};
+ saw_l2: regulator@b012000 {
+ compatible = "qcom,saw2";
+ reg = <0xb012000 0x1000>;
+ regulator;
+ };
+
serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78af000 0x200>;