OpenWrt – Rev 1
?pathlinks?
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Linksys EA6350v3";
compatible = "linksys,ea6350v3";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
power: status {
label = "EA6350v3:green:status";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "linksys-ea6350v3";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "linksys-ea6350v3";
};
&blsp_dma {
status = "okay";
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
mux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
mux_cs {
function = "gpio";
pins = "gpio54", "gpio59";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp1_spi1 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
<&tlmm 59 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
SBL1@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
MBIB@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
QSEE@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
CDT@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
APPSBLENV@d0000 {
label = "APPSBLENV";
reg = <0x000d0000 0x00010000>;
read-only;
};
APPSBL@e0000 {
label = "APPSBL"; /* uboot */
reg = <0x000e0000 0x00080000>;
read-only;
};
ART@160000 {
label = "ART";
reg = <0x00160000 0x00010000>;
read-only;
};
u_env@170000 {
label = "u_env";
reg = <0x00170000 0x00020000>;
};
s_env@190000 {
label = "s_env";
reg = <0x00190000 0x00020000>;
};
devinfo@1b0000 {
label = "devinfo";
reg = <0x001b0000 0x00010000>;
};
/* 0x001c0000 - 0x00200000 unused */
};
};
flash@1 {
status = "okay";
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
kernel@0 {
label = "kernel";
reg = <0x00000000 0x02800000>;
};
rootfs@300000 {
label = "rootfs";
reg = <0x00300000 0x02500000>;
};
alt_kernel@2800000 {
label = "alt_kernel";
reg = <0x02800000 0x02800000>;
};
alt_rootfs@2b00000 {
label = "alt_rootfs";
reg = <0x02b00000 0x02500000>;
};
sysdiag@5000000 {
label = "sysdiag";
reg = <0x05000000 0x00100000>;
};
syscfg@5100000 {
label = "syscfg";
reg = <0x05100000 0x02F00000>;
};
/* 0x00000000 - 0x08000000: 128 MiB */
};
};
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};