OpenWrt – Rev 1

Subversion Repositories:
Rev:
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
 * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 */

#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>

/ {
        model = "Netgear EX61X0v2";
        compatible = "netgear,ex61x0v2", "qcom,ipq4019";

        soc {
                mdio@90000 {
                        status = "okay";
                };

                ess-psgmii@98000 {
                        status = "okay";
                };

                tcsr@1949000 {
                        compatible = "qcom,tcsr";
                        reg = <0x1949000 0x100>;
                        qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
                };

                ess_tcsr@1953000 {
                        compatible = "qcom,tcsr";
                        reg = <0x1953000 0x1000>;
                        qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
                };

                tcsr@1957000 {
                        compatible = "qcom,tcsr";
                        reg = <0x1957000 0x100>;
                        qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
                };

                crypto@8e3a000 {
                        status = "okay";
                };

                watchdog@b017000 {
                        status = "okay";
                };

                ess-switch@c000000 {
                        status = "okay";
                };

                edma@c080000 {
                        status = "okay";
                        qcom,num_gmac = <1>;
                };
        };

        aliases {
                led-boot = &power_amber;
                led-failsafe = &power_amber;
                led-running = &power_green;
                led-upgrade = &power_amber;
        };

        keys {
                compatible = "gpio-keys";

                wps {
                        label = "wps";
                        gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WPS_BUTTON>;
                };

                reset {
                        label = "reset";
                        gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };

        led_spi {
                compatible = "spi-gpio";
                #address-cells = <1>;
                #size-cells = <0>;

                gpio-sck = <&tlmm 5 GPIO_ACTIVE_HIGH>;
                gpio-mosi = <&tlmm 4 GPIO_ACTIVE_HIGH>;
                num-chipselects = <0>;

                led_gpio: led_gpio@0 {
                        compatible = "fairchild,74hc595";
                        reg = <0>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        registers-number = <1>;
                        spi-max-frequency = <1000000>;
                };
        };

        leds {
                compatible = "gpio-leds";

                power_amber: power_amber {
                        label = "ex61x0v2:amber:power";
                        gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
                };

                power_green: power_green {
                        label = "ex61x0v2:green:power";
                        gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
                };

                right {
                        label = "ex61x0v2:blue:right";
                        gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
                };

                left {
                        label = "ex61x0v2:blue:left";
                        gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
                };

                client_green {
                        label = "ex61x0v2:green:client";
                        gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
                };

                client_red {
                        label = "ex61x0v2:red:client";
                        gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
                };

                router_green {
                        label = "ex61x0v2:green:router";
                        gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
                };

                router_red {
                        label = "ex61x0v2:red:router";
                        gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
                };

                wps {
                        label = "ex61x0v2:green:wps";
                        gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
                };
        };
};

&tlmm {
        serial_pins: serial_pinmux {
                mux {
                        pins = "gpio60", "gpio61";
                        function = "blsp_uart0";
                        bias-disable;
                };
        };

        spi_0_pins: spi_0_pinmux {
                pin {
                        function = "blsp_spi0";
                        pins = "gpio55", "gpio56", "gpio57";
                        drive-strength = <12>;
                        bias-disable;
                };
                pin_cs {
                        function = "gpio";
                        pins = "gpio54";
                        drive-strength = <2>;
                        bias-disable;
                        output-high;
                };
        };
};

&blsp1_spi1 {
        pinctrl-0 = <&spi_0_pins>;
        pinctrl-names = "default";
        status = "okay";
        cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;

        mx25l12805d@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <24000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition0@0 {
                                label = "SBL1";
                                reg = <0x00000000 0x00040000>;
                                read-only;
                        };

                        partition1@40000 {
                                label = "MIBIB";
                                reg = <0x00040000 0x00020000>;
                                read-only;
                        };

                        partition2@60000 {
                                label = "QSEE";
                                reg = <0x00060000 0x00060000>;
                                read-only;
                        };

                        partition3@c0000 {
                                label = "CDT";
                                reg = <0x000c0000 0x00010000>;
                                read-only;
                        };

                        partition4@d0000 {
                                label = "DDRPARAMS";
                                reg = <0x000d0000 0x00010000>;
                                read-only;
                        };

                        partition5@E0000 {
                                label = "APPSBLENV";
                                reg = <0x000e0000 0x00010000>;
                                read-only;
                        };

                        partition6@F0000 {
                                label = "APPSBL";
                                reg = <0x000f0000 0x00080000>;
                                read-only;
                        };

                        partition7@170000 {
                                label = "ART";
                                reg = <0x00170000 0x00010000>;
                                read-only;
                        };

                        partition8@180000 {
                                label = "config";
                                reg = <0x00180000 0x00010000>;
                                read-only;
                        };

                        partition9@190000 {
                                label = "pot";
                                reg = <0x00190000 0x00010000>;
                                read-only;
                        };

                        partition10@1a0000 {
                                label = "dnidata";
                                reg = <0x001a0000 0x00010000>;
                                read-only;
                        };

                        partition11@1b0000 {
                                compatible = "denx,fit";
                                label = "firmware";
                                reg = <0x001b0000 0x00e10000>;
                        };

                        partition12@fc0000 {
                                label = "language";
                                reg = <0x00fc0000 0x00040000>;
                                read-only;
                        };
                };
        };
};

&blsp1_uart1 {
        pinctrl-0 = <&serial_pins>;
        pinctrl-names = "default";
        status = "okay";
};

&blsp_dma {
        status = "okay";
};

&cryptobam {
        status = "okay";
};

&wifi0 {
        status = "okay";
};

&wifi1 {
        status = "okay";
};