OpenWrt – Rev 1
?pathlinks?
From 0a0c39044332a75eaf4a3c5654079df953b0d839 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Mon, 7 Sep 2015 21:00:38 +0200
Subject: [PATCH 3/8] spi/bcm63xx: document device tree bindings
Add documentation for the bindings of the low speed SPI controller found
on most bcm63xx SoCs.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
.../devicetree/bindings/spi/spi-bcm63xx.txt | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-bcm63xx.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt
@@ -0,0 +1,33 @@
+Binding for Broadcom BCM6348/BCM6358 SPI controller
+
+Required properties:
+- compatible: must contain one of "brcm,bcm6348-spi", "brcm,bcm6358-spi".
+- reg: Base address and size of the controllers memory area.
+- interrupts: Interrupt for the SPI block.
+- clocks: phandle of the SPI clock.
+- clock-names: has to be "spi".
+- #address-cells: <1>, as required by generic SPI binding.
+- #size-cells: <0>, also as required by generic SPI binding.
+
+Optional properties:
+- num-cs: some controllers have less than 8 cs signals. Defaults to 8
+ if absent.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+ spi@10000800 {
+ compatible = "brcm,bcm6368-spi", "brcm,bcm6358-spi";
+ reg = <0x10000800 0x70c>;
+
+ interrupts = <1>;
+
+ clocks = <&clkctl 9>;
+ clock-names = "spi";
+
+ num-cs = <5>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
Generated by GNU Enscript 1.6.5.90.