OpenWrt – Rev 1
?pathlinks?
From 4bdd40849632608d5cb7d3a64380cd76e7eea07b Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Wed, 27 Jul 2016 11:33:56 +0200
Subject: [PATCH 02/16] Documentation: add BCM6328 pincontroller binding
documentation
Add binding documentation for the pincontrol core found in BCM6328 SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
.../bindings/pinctrl/brcm,bcm6328-pinctrl.txt | 61 ++++++++++++++++++++++
1 file changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt
@@ -0,0 +1,61 @@
+* Broadcom BCM6328 pin controller
+
+Required properties:
+- compatible: Must be "brcm,bcm6328-pinctrl".
+- reg: Register specifies of dirout, dat, mode, mux registers.
+- reg-names: Must be "dirout", "dat", "mode", "mux".
+- gpio-controller: Identifies this node as a GPIO controller.
+- #gpio-cells: Must be <2>
+
+Example:
+
+pinctrl: pin-controller@10000080 {
+ compatible = "brcm,bcm6328-pinctrl";
+ reg = <0x10000080 0x8>,
+ <0x10000088 0x8>,
+ <0x10000098 0x4>,
+ <0x1000009c 0xc>;
+ reg-names = "dirout", "dat", "mode", "mux";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+};
+
+Available pins/groups and functions:
+
+name pins functions
+-----------------------------------------------------------
+gpio0 0 led
+gpio1 1 led
+gpio2 2 led
+gpio3 3 led
+gpio4 4 led
+gpio5 5 led
+gpio6 6 led, serial_led_data
+gpio7 7 led, serial_led_clk
+gpio8 8 led
+gpio9 9 led
+gpio10 10 led
+gpio11 11 led
+gpio12 12 led
+gpio13 13 led
+gpio14 14 led
+gpio15 15 led
+gpio16 16 led, pcie_clkreq
+gpio17 17 led
+gpio18 18 led
+gpio19 19 led
+gpio20 20 led
+gpio21 21 led
+gpio22 22 led
+gpio23 23 led
+gpio24 24 -
+gpio25 25 ephy0_act_led
+gpio26 26 ephy1_act_led
+gpio27 27 ephy2_act_led
+gpio28 28 ephy3_act_led
+gpio29 29 -
+gpio30 30 -
+gpio31 31 -
+hsspi_cs1 - hsspi_cs1
+usb_port1 - usb_host_port, usb_device_port
Generated by GNU Enscript 1.6.5.90.