OpenWrt – Rev 1
?pathlinks?
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "brcm,bcm6318";
aliases {
pinctrl = &pinctrl;
serial0 = &uart0;
spi1 = &hsspi;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "brcm,bmips3300", "mips,mips4Kc";
device_type = "cpu";
reg = <0>;
};
};
cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
interrupt-controller;
#interrupt-cells = <1>;
};
memory { device_type = "memory"; reg = <0 0>; };
ubus@10000000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
interrupt-parent = <&periph_intc>;
ext_intc: interrupt-controller@10000018 {
compatible = "brcm,bcm6318-ext-intc";
reg = <0x10000018 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <24>, <25>, <26>, <27>;
};
periph_intc: interrupt-controller@10000020 {
compatible = "brcm,bcm6345-l1-intc";
reg = <0x10000020 0x20>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <2>;
};
pinctrl: pin-controller@10000080 {
compatible = "brcm,bcm6318-pinctrl";
reg = <0x10000080 0x08>,
<0x10000088 0x08>,
<0x10000098 0x04>,
<0x1000009c 0x0c>,
<0x100000d4 0x18>;
reg-names = "dirout", "dat", "mode", "mux", "pad";
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&ext_intc>;
interrupts = <0 0>, <1 0>;
interrupt-names = "gpio33", "gpio34";
pinctrl_ephy0_spd_led: ephy0_spd_led {
function = "ephy0_spd_led";
pins = "gpio0";
};
pinctrl_ephy1_spd_led: ephy1_spd_led {
function = "ephy1_spd_led";
pins = "gpio1";
};
pinctrl_ephy2_spd_led: ephy2_spd_led {
function = "ephy2_spd_led";
pins = "gpio2";
};
pinctrl_ephy3_spd_led: ephy3_spd_led {
function = "ephy3_spd_led";
pins = "gpio3";
};
pinctrl_ephy0_act_led: ephy0_act_led {
function = "ephy0_act_led";
pins = "gpio4";
};
pinctrl_ephy1_act_led: ephy1_act_led {
function = "ephy1_act_led";
pins = "gpio5";
};
pinctrl_ephy2_act_led: ephy2_act_led {
function = "ephy2_act_led";
pins = "gpio6";
};
pinctrl_ephy3_act_led: ephy3_act_led {
function = "ephy3_act_led";
pins = "gpio7";
};
pinctrl_serial_led: serial_led {
pinctrl_serial_led_data: serial_led_data {
function = "serial_led_data";
pins = "gpio6";
};
pinctrl_serial_led_clk: serial_led_clk {
function = "serial_led_clk";
pins = "gpio7";
};
};
pinctrl_inet_act_led: inet_act_led {
function = "inet_act_led";
pins = "gpio8";
};
pinctrl_inet_fail_led: inet_fail_led {
function = "inet_fail_led";
pins = "gpio9";
};
pinctrl_dsl_led: dsl_led {
function = "dsl_led";
pins = "gpio10";
};
pinctrl_post_fail_led: post_fail_led {
function = "post_fail_led";
pins = "gpio11";
};
pinctrl_wlan_wps_led: wlan_wps_led {
function = "wlan_wps_led";
pins = "gpio12";
};
pinctrl_usb_pwron: usb_pwron {
function = "usb_pwron";
pins = "gpio13";
};
pinctrl_usb_device_led: usb_device_led {
function = "usb_device_led";
pins = "gpio13";
};
pinctrl_usb_active: usb_active {
function = "usb_active";
pins = "gpio40";
};
};
uart0: serial@10000100 {
compatible = "brcm,bcm6345-uart";
reg = <0x10000100 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <28>;
/* clocks = <&periph_clk>; */
/* clock-names = "refclk"; */
status = "disabled";
};
leds: led-controller@10000200 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm6328-leds";
reg = <0x10000200 0x24>;
status = "disabled";
};
hsspi: spi@10003000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm6328-hsspi";
reg = <0x10003000 0x600>;
interrupts = <29>;
/* clocks = <&clkctl 25>; */
};
};
};