OpenWrt – Rev 1

Subversion Repositories:
Rev:
From 62da6ec26e4e73c553dfadcd962b583af9975a39 Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Fri, 9 Mar 2018 13:20:21 -0800
Subject: [PATCH 352/454] overlays: Add an overlay for the Adafruit Kippah with
 their 7" panel

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 arch/arm/boot/dts/overlays/Makefile           |  1 +
 arch/arm/boot/dts/overlays/README             |  6 +++
 .../overlays/vc4-kms-kippah-7inch-overlay.dts | 43 +++++++++++++++++++
 3 files changed, 50 insertions(+)
 create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -137,6 +137,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
        upstream.dtbo \
        upstream-aux-interrupt.dtbo \
        vc4-fkms-v3d.dtbo \
+       vc4-kms-kippah-7inch.dtbo \
        vc4-kms-v3d.dtbo \
        vga666.dtbo \
        w1-gpio.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -1977,6 +1977,12 @@ Params: cma-256                 CMA is 2
         cma-64                  CMA is 64MB, 64MB-aligned
 
 
+Name:   vc4-kms-kippah-7inch
+Info:   Enable the Adafruit DPI Kippah with the 7" Ontat panel attached.
+        Requires vc4-kms-v3d to be loaded.
+Load:   dtoverlay=vc4-kms-kippah-7inch
+
+
 Name:   vga666
 Info:   Overlay for the Fen Logic VGA666 board
         This uses GPIOs 2-21 (so no I2C), and activates the output 2-3 seconds
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts
@@ -0,0 +1,43 @@
+/*
+ * vc4-kms-v3d-overlay.dts
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/pinctrl/bcm2835.h>
+
+/ {
+       compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+       fragment@0 {
+               target-path = "/";
+               __overlay__ {
+                       panel: panel {
+                               compatible = "ontat,yx700wv03", "simple-panel";
+
+                               port {
+                                       panel_in: endpoint {
+                                               remote-endpoint = <&dpi_out>;
+                                       };
+                               };
+                       };
+               };
+       };
+
+       fragment@1 {
+               target = <&dpi>;
+               __overlay__  {
+                       status = "okay";
+
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&dpi_18bit_gpio0>;
+
+                       port {
+                               dpi_out: endpoint@0 {
+                                       remote-endpoint = <&panel_in>;
+                               };
+                       };
+               };
+       };
+};

Generated by GNU Enscript 1.6.5.90.