OpenWrt – Rev 1

Subversion Repositories:
Rev:
From 454ca715ff9f88c4e02ac892f196da8a1d90d052 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Mon, 9 Jul 2018 21:11:32 +0100
Subject: [PATCH 348/454] overlays: Add addr parameter to i2c-rtc (& -gpio)

See: https://github.com/raspberrypi/linux/issues/2611

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
 arch/arm/boot/dts/overlays/README             | 10 +++++++
 .../dts/overlays/i2c-rtc-gpio-overlay.dts     | 28 +++++++++++++++++++
 .../arm/boot/dts/overlays/i2c-rtc-overlay.dts | 11 ++++++++
 3 files changed, 49 insertions(+)

--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -826,6 +826,10 @@ Params: abx80x                  Select o
 
         pcf8563                 Select the PCF8563 device
 
+        addr                    Sets the address for the RTC. Note that the
+                                device must be configured to use the specified
+                                address.
+
         trickle-diode-type      Diode type for trickle charge - "standard" or
                                 "schottky" (ABx80x only)
 
@@ -850,6 +854,8 @@ Params: abx80x                  Select o
 
         ds3231                  Select the DS3231 device
 
+        m41t62                  Select the M41T62 device
+
         mcp7940x                Select the MCP7940x device
 
         mcp7941x                Select the MCP7941x device
@@ -860,6 +866,10 @@ Params: abx80x                  Select o
 
         pcf8563                 Select the PCF8563 device
 
+        addr                    Sets the address for the RTC. Note that the
+                                device must be configured to use the specified
+                                address.
+
         trickle-diode-type      Diode type for trickle charge - "standard" or
                                 "schottky" (ABx80x only)
 
--- a/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts
+++ b/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts
@@ -159,6 +159,21 @@
                };
        };
 
+       fragment@10 {
+               target = <&i2c_arm>;
+               __dormant__ {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "okay";
+
+                       m41t62: m41t62@68 {
+                               compatible = "st,m41t62";
+                               reg = <0x68>;
+                               status = "okay";
+                       };
+               };
+       };
+
        __overrides__ {
                abx80x = <0>,"+1";
                ds1307 = <0>,"+2";
@@ -169,6 +184,19 @@
                pcf2127 = <0>,"+7";
                pcf8523 = <0>,"+8";
                pcf8563 = <0>,"+9";
+               m41t62 = <0>,"+10";
+
+               addr = <&abx80x>, "reg:0",
+                      <&ds1307>, "reg:0",
+                      <&ds1339>, "reg:0",
+                      <&ds3231>, "reg:0",
+                      <&mcp7940x>, "reg:0",
+                      <&mcp7941x>, "reg:0",
+                      <&pcf2127>, "reg:0",
+                      <&pcf8523>, "reg:0",
+                      <&pcf8563>, "reg:0",
+                      <&m41t62>, "reg:0";
+
                trickle-diode-type = <&abx80x>,"abracon,tc-diode";
                trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0",
                                        <&abx80x>,"abracon,tc-resistor";
--- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts
+++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts
@@ -169,6 +169,17 @@
                pcf8523 = <0>,"+7";
                pcf8563 = <0>,"+8";
                m41t62 = <0>,"+9";
+
+               addr = <&abx80x>, "reg:0",
+                      <&ds1307>, "reg:0",
+                      <&ds1339>, "reg:0",
+                      <&ds3231>, "reg:0",
+                      <&mcp7940x>, "reg:0",
+                      <&mcp7941x>, "reg:0",
+                      <&pcf2127>, "reg:0",
+                      <&pcf8523>, "reg:0",
+                      <&pcf8563>, "reg:0",
+                      <&m41t62>, "reg:0";
                trickle-diode-type = <&abx80x>,"abracon,tc-diode";
                trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0",
                                        <&abx80x>,"abracon,tc-resistor";