OpenWrt – Rev 1

Subversion Repositories:
Rev:
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca956x.dtsi"

/ {
        chosen {
                bootargs = "console=ttyS0,115200n8";
        };

        aliases {
                led-boot = &power;
                led-failsafe = &power;
                led-running = &power;
                led-upgrade = &power;
        };

        leds: leds {
                compatible = "gpio-leds";

                wps {
                        label = "elecom:red:wps";
                        gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
                };
        };

        keys {
                compatible = "gpio-keys";

                reset {
                        label = "reset";
                        gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                        debounce-interval = <60>;
                };

                button_wps {
                        label = "wps";
                        gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WPS_BUTTON>;
                        debounce-interval = <60>;
                };

                ap {
                        label = "ap";
                        gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_0>;
                        linux,input-type = <EV_SW>;
                        debounce-interval = <60>;
                };
        };
};

&spi {
        status = "okay";
        num-cs = <1>;

        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <25000000>;

                partitions: partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "u-boot";
                                reg = <0x000000 0x040000>;
                                read-only;
                        };

                        partition@40000 {
                                label = "u-boot-env";
                                reg = <0x040000 0x010000>;
                                read-only;
                        };

                        partition@50000 {
                                label = "nvram";
                                reg = <0x050000 0x020000>;
                                read-only;
                        };
                };
        };
};

&mdio0 {
        status = "okay";

        phy0: ethernet-phy@0 {
                reg = <0>;

                qca,ar8327-initvals = <
                        0x04 0x00000080 /* PORT0 PAD MODE CTRL */
                        0x50 0xcf37cf37 /* LED_CTRL0 */
                        0x54 0x00000000 /* LED_CTRL1 */
                        0x58 0x00000000 /* LED_CTRL2 */
                        0x5c 0x03ffff00 /* LED_CTRL3 */
                        0x7c 0x0000007e /* PORT0_STATUS */
                >;
        };
};

&eth0 {
        status = "okay";

        pll-data = <0x03000101 0x00000101 0x00001919>;

        mtd-mac-address = <&ART 0x1002>;
        mtd-mac-address-increment = <(-1)>;
        phy-mode = "sgmii";
        phy-handle = <&phy0>;
};

&uart {
        status = "okay";
};

&wmac {
        status = "okay";
        mtd-cal-data = <&ART 0x1000>;
};