OpenWrt – Rev 1

Subversion Repositories:
Rev:
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca956x.dtsi"

/ {
        compatible = "tplink,archer-c5x", "qca,qca9560";

        chosen {
                bootargs = "console=ttyS0,115200n8";
        };

        led_spi {
                compatible = "spi-gpio";
                #address-cells = <1>;
                #size-cells = <0>;

                gpio-sck = <&gpio 18 GPIO_ACTIVE_HIGH>;
                gpio-mosi = <&gpio 17 GPIO_ACTIVE_HIGH>;
                cs-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
                num-chipselects = <1>;

                led_gpio: led_gpio@0 {
                        compatible = "fairchild,74hc595";
                        reg = <0>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        registers-number = <1>;
                        spi-max-frequency = <10000000>;
                };
        };

        keys {
                compatible = "gpio-keys-polled";
                poll-interval = <100>;

                wps_button {
                        label = "WPS button";
                        linux,code = <KEY_WPS_BUTTON>;
                        gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
                };

                wifi_button {
                        label = "WiFi button";
                        linux,code = <KEY_RFKILL>;
                        gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
                };

                reset_button {
                        label = "Reset button";
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
                };
        };

        gpio-export {
                compatible = "gpio-export";

                gpio_shift_register_oe {
                        gpio-export,name = "tp-link:oe:sr";
                        gpio-export,output = <0>;
                        gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
                };

                gpio_shift_register_reset {
                        gpio-export,name = "tp-link:reset:sr";
                        gpio-export,output = <1>;
                        gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
                };

        };
};

&uart {
        status = "okay";
};

&gpio {
        status = "okay";
};

&pcie {
        status = "okay";
};

&eth0 {
        phy-mode = "mii";
        phy-handle = <&swphy0>;

        gmac-config {
                device = <&gmac>;

                switch-phy-addr-swap = <1>;
                switch-phy-swap = <1>;
        };
};