OpenWrt – Rev 1

Subversion Repositories:
Rev:
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca9561_tplink_archer-c5x.dtsi"

/ {
        compatible = "tplink,archer-c58-v1", "qca,qca9560";
        model = "TP-Link Archer C58 v1";

        aliases {
                led-boot = &power;
                led-failsafe = &power;
                led-running = &power;
                led-upgrade = &power;
        };

        leds {
                compatible = "gpio-leds";

                power: power {
                        label = "tp-link:green:power";
                        gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };

                wlan2g {
                        label = "tp-link:green:wlan2g";
                        gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy1tpt";
                };

                wlan5g {
                        label = "tp-link:green:wlan5g";
                        gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0tpt";
                };

                wan_green {
                        label = "tp-link:green:wan";
                        gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
                };

                wan_amber {
                        label = "tp-link:amber:wan";
                        gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
                };

                lan {
                        label = "tp-link:green:lan";
                        gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
                };

                wps {
                        label = "tp-link:green:wps";
                        gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
                };
        };
};

&spi {
        status = "okay";
        num-cs = <1>;

        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <25000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "u-boot";
                                reg = <0x000000 0x010000>;
                                read-only;
                        };

                        mac: partition@10000 {
                                label = "mac";
                                reg = <0x010000 0x010000>;
                                read-only;
                        };

                        partition@20000 {
                                compatible = "denx,uimage";
                                label = "firmware";
                                reg = <0x020000 0x7c0000>;
                        };

                        partition@7e0000 {
                                label = "tplink";
                                reg = <0x7e0000 0x010000>;
                                read-only;
                        };

                        art: partition@7f0000 {
                                label = "art";
                                reg = <0x7f0000 0x010000>;
                                read-only;
                        };
                };
        };
};

&eth0 {
        status = "okay";
        mtd-mac-address = <&mac 0x8>;
        mtd-mac-address-increment = <1>;
};

&eth1 {
        status = "okay";
        mtd-mac-address = <&mac 0x8>;
};

&wmac {
        status = "okay";
        mtd-cal-data = <&art 0x1000>;
        mtd-mac-address = <&mac 0x8>;
};