OpenWrt – Rev 1

Subversion Repositories:
Rev:
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca9557.dtsi"

/ {
        compatible = "buffalo,bhr-4grv2", "qca,qca9557";
        model = "Buffalo BHR-4GRV2";

        aliases {
                led-boot = &power;
                led-failsafe = &power;
                led-running = &power;
                led-upgrade = &power;
        };

        chosen {
                bootargs = "console=ttyS0,115200n8";
        };

        leds {
                compatible = "gpio-leds";

                power: power {
                        label = "bhr-4grv2:green:power";
                        gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };

                diag {
                        label = "bhr-4grv2:orange:diag";
                        gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
                };

                vpn_orange {
                        label = "bhr-4grv2:orange:vpn";
                        gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
                };

                vpn_green {
                        label = "bhr-4grv2:green:vpn";
                        gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
                };
        };

        keys {
                compatible = "gpio-keys-polled";
                poll-interval = <20>;

                reset {
                        label = "reset";
                        gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                        debounce-interval = <60>;
                };

                eco {
                        label = "eco";
                        gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_0>;
                        linux,input-type = <EV_SW>;
                        debounce-interval = <60>;
                };
        };
};

&spi {
        status = "okay";
        num-cs = <1>;

        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <25000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "u-boot";
                                reg = <0x000000 0x040000>;
                                read-only;
                        };

                        partition@40000 {
                                label = "u-boot-env";
                                reg = <0x040000 0x010000>;
                        };

                        partition@50000 {
                                compatible = "denx,uimage";
                                label = "firmware";
                                reg = <0x050000 0xfa0000>;
                        };

                        art: partition@ff0000 {
                                label = "art";
                                reg = <0xff0000 0x010000>;
                                read-only;
                        };
                };
        };
};

&mdio0 {
        status = "okay";

        phy0: ethernet-phy@0 {
                reg = <0>;

                qca,ar8327-initvals = <
                    0x04 0x80080080 /* PORT0 PAD MODE CTRL */
                    0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
                    0x7c 0x0000007e /* PORT0_STATUS */
                    0x94 0x0000007e /* PORT6 STATUS */
                >;
        };
};

&eth0 {
        status = "okay";

        mtd-mac-address = <&art 0x0>;
        phy-handle = <&phy0>;
        pll-data = <0x56000000 0x00000101 0x00001616>;
};

&eth1 {
        status = "okay";

        mtd-mac-address = <&art 0x6>;
        pll-data = <0x03000101 0x00000101 0x00001616>;

        fixed-link {
                speed = <1000>;
                full-duplex;
        };
};

&uart {
        status = "okay";
};