OpenWrt – Rev 1

Subversion Repositories:
Rev:
// SPDX-License-Identifier: GPL-2.0

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "ar9344.dtsi"

/ {
        compatible = "ubnt,wa", "qca,ar9342";
        model = "Ubiquiti Networks WA board";

        keys {
                compatible = "gpio-keys";

                reset {
                        label = "Reset button";
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
                };
        };
};

&ref {
        clock-frequency = <40000000>;
};

&uart {
        status = "okay";
};

&gpio {
        status = "okay";
};

&pcie {
        status = "okay";
};

&spi {
        status = "okay";
        num-cs = <1>;

        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <25000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "u-boot";
                                reg = <0x000000 0x040000>;
                                read-only;
                        };

                        partition@40000 {
                                label = "u-boot-env";
                                reg = <0x040000 0x010000>;
                                read-only;
                        };

                        partition@50000 {
                                compatible = "denx,uimage";
                                label = "firmware";
                                reg = <0x050000 0xf60000>;
                        };

                        partition@fb0000 {
                                label = "cfg";
                                reg = <0xfb0000 0x040000>;
                                read-only;
                        };

                        eeprom: partition@ff0000 {
                                label = "EEPROM";
                                reg = <0xff0000 0x010000>;
                                read-only;
                        };
                };
        };
};

&wmac {
        status = "okay";

        qca,disable-5ghz;
        mtd-cal-data = <&eeprom 0x1000>;
        mtd-mac-address = <&eeprom 0x1002>;
};