OpenWrt – Rev 1

?pathlinks?

Blame – Last modification – View Log – Download

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "ar9341.dtsi"

/ {
        model = "PowerCloud Systems CR3000";
        compatible = "pcs,cr3000", "qca,ar9341";

        aliases {
                serial0 = &uart;
                led-boot = &status;
                led-failsafe = &status;
                led-running = &status;
                led-upgrade = &status;
        };

        keys {
                compatible = "gpio-keys-polled";
                poll-interval = <20>;

                pinctrl-names = "default";
                pinctrl-0 = <&jtag_disable_pins>;

                reset {
                        label = "Reset button";
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
                };

                wps {
                        label = "WPS button";
                        linux,code = <KEY_WPS_BUTTON>;
                        gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
                };
        };

        leds {
                compatible = "gpio-leds";

                status: power {
                        label = "pcs:amber:power";
                        gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };

                wlan2g {
                        label = "pcs:blue:wlan";
                        gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0tpt";
                };

                wan {
                        label = "pcs:blue:wan";
                        gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
                };

                lan1 {
                        label = "pcs:blue:lan1";
                        gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
                };

                lan2 {
                        label = "pcs:blue:lan2";
                        gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
                };

                lan3 {
                        label = "pcs:blue:lan3";
                        gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
                };

                lan4 {
                        label = "pcs:blue:lan4";
                        gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
                };
        };
};

&ref {
        clock-frequency = <25000000>;
};

&uart {
        status = "okay";
};

&gpio {
        status = "okay";
};

&spi {
        num-cs = <1>;

        status = "okay";

        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <25000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        uboot: partition@0 {
                                label = "u-boot";
                                reg = <0x000000 0x040000>;
                                read-only;
                        };

                        partition@40000 {
                                label = "u-boot-env";
                                reg = <0x040000 0x010000>;
                                read-only;
                        };

                        partition@50000 {
                                compatible = "denx,uimage";
                                label = "firmware";
                                reg = <0x050000 0x07a0000>;
                        };

                        art: partition@7f0000 {
                                label = "art";
                                reg = <0x7f0000 0x010000>;
                                read-only;
                        };
                };
        };
};

&wmac {
        status = "okay";

        mtd-cal-data = <&art 0x1000>;
        mtd-mac-address = <&art 0x1002>;
};

&eth0 {
        status = "okay";

        phy-handle = <&swphy0>;
        mtd-mac-address = <&art 0x0>;
        mtd-mac-address-increment = <1>;
};

&eth1 {
        status = "okay";

        phy-handle = <&swphy4>;
        mtd-mac-address = <&art 0x0>;
        phy-mode = "gmii";
        pll-data = <0x06000000 0x00000101 0x00001616>;

        gmac-config {
                device = <&gmac>;
                switch-phy-swap = <1>;
        };
};