OpenWrt – Rev 1

?pathlinks?

Blame – Last modification – View Log – Download

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "ar7242.dtsi"

/ {
        compatible = "avm,fritz300e", "qca,ar7242";
        model = "AVM FRITZ!WLAN Repeater 300E";

        aliases {
                led-boot = &power;
                led-failsafe = &power;
                led-running = &power;
                led-upgrade = &power;
        };

        keys {
                compatible = "gpio-keys-polled";
                poll-interval = <20>;

                wps {
                        label = "wps";
                        linux,code = <KEY_WPS_BUTTON>;
                        gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
                };
        };

        leds {
                compatible = "gpio-leds";

                power: power {
                        label = "fritz300e:green:power";
                        gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };

                lan {
                        label = "fritz300e:green:lan";
                        gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                };

                wlan {
                        label = "fritz300e:green:wlan";
                        gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0tpt";
                };
        };

        ath9k-leds {
                compatible = "gpio-leds";

                rssi0 {
                        label = "fritz300e:green:rssi0";
                        gpios = <&ath9k 10 GPIO_ACTIVE_LOW>;
                };

                rssi1 {
                        label = "fritz300e:green:rssi1";
                        gpios = <&ath9k 4 GPIO_ACTIVE_LOW>;
                };

                rssi2 {
                        label = "fritz300e:green:rssi2";
                        gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
                };

                rssi3 {
                        label = "fritz300e:green:rssi3";
                        gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
                };

                rssi4 {
                        label = "fritz300e:green:rssi4";
                        gpios = <&ath9k 5 GPIO_ACTIVE_LOW>;
                };
        };

        eth-phy-reset {
                compatible = "regulator-fixed";

                regulator-name = "eth-phy-reset";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;

                gpio = <&gpio 11 GPIO_ACTIVE_LOW>;
                startup-delay-us = <300000>;
                enable-active-high;

                regulator-always-on;
        };
};

&spi {
        status = "okay";
        num-cs = <1>;

        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <25000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                reg = <0x0 0x20000>;
                                label = "urloader";
                                read-only;
                        };

                        partition@20000 {
                                compatible = "avm,eva-firmware";
                                reg = <0x20000 0xee0000>;
                                label = "firmware";
                        };

                        partition@f00000 {
                                reg = <0xf00000 0x80000>;
                                label = "tffs (1)";
                                read-only;
                        };

                        partition@f80000 {
                                reg = <0xf80000 0x80000>;
                                label = "tffs (2)";
                                read-only;
                        };
                };
        };
};

&uart {
        status = "okay";
};

&pcie {
        status = "okay";

        ath9k: wifi@0,0 {
                reg = <0x0000 0 0 0 0>;
                #gpio-cells = <2>;
                gpio-controller;
                qca,no-eeprom;
        };
};

&mdio0 {
        status = "okay";

        phy0: ethernet-phy@0 {
                reg = <0>;
                phy-mode = "rgmii";
        };
};

&eth0 {
        status = "okay";

        phy-mode = "rgmii";
        phy-handle = <&phy0>;

        pll-data = <0x16000000 0x00000101 0x00001313>;
};