OpenWrt – Rev 1

Subversion Repositories:
Rev:
/*
 * lmu5000.dst - Device Tree file for CalAmp LMU5000 board
 *
 * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
 *
 * Licensed under GPLv2.
 */
/dts-v1/;
#include "at91sam9g20.dtsi"

/ {
        model = "CalAmp LMU5000";
        compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";

        chosen {
                bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
        };

        memory {
                reg = <0x20000000 0x4000000>;
        };

        clocks {
                #address-cells = <1>;
                #size-cells = <1>;
                ranges;

                main_clock: clock@0 {
                        compatible = "atmel,osc", "fixed-clock";
                        clock-frequency = <18432000>;
                };
        };

        ahb {
                apb {
                        pinctrl@fffff400 {
                                board {
                                        pinctrl_pck0_as_mck: pck0_as_mck {
                                                atmel,pins =
                                                        <2 1 0x2 0x0>;  /* PC1 periph B */
                                        };
                                };
                        };

                        dbgu: serial@fffff200 {
                                status = "okay";
                        };

                        usart0: serial@fffb0000 {
                                pinctrl-0 =
                                        <&pinctrl_usart0
                                         &pinctrl_usart0_rts
                                         &pinctrl_usart0_cts
                                         &pinctrl_usart0_dtr_dsr
                                         &pinctrl_usart0_dcd
                                         &pinctrl_usart0_ri>;
                                status = "okay";
                        };

                        usart2: serial@fffb8000 {
                                status = "okay";
                        };

                        uart0: serial@fffd4000 {
                                status = "okay";
                        };

                        uart1: serial@fffd8000 {
                                status = "okay";
                        };

                        macb0: ethernet@fffc4000 {
                                phy-mode = "mii";
                                status = "okay";
                        };

                        usb1: gadget@fffa4000 {
                                atmel,vbus-gpio = <&pioC 5 0>;
                                status = "okay";
                        };

                        ssc0: ssc@fffbc000 {
                                status = "okay";
                                pinctrl-0 = <&pinctrl_ssc0_tx>;
                        };

                        watchdog@fffffd40 {
                                status = "okay";
                        };
                };

                nand0: nand@40000000 {
                        nand-bus-width = <8>;
                        nand-ecc-mode = "soft";
                        nand-on-flash-bbt;
                        status = "okay";

                        kernel@0 {
                                label = "kernel";
                                reg = <0x0 0x400000>;
                        };

                        rootfs@400000 {
                                label = "rootfs";
                                reg = <0x400000 0x3C00000>;
                        };

                        user1@4000000 {
                                label = "user1";
                                reg = <0x4000000 0x2000000>;
                        };

                        user2@6000000 {
                                label = "user2";
                                reg = <0x6000000 0x2000000>;
                        };
                };

                usb0: ohci@500000 {
                        num-ports = <2>;
                        status = "okay";
                };
        };
};