OpenWrt – Rev 1

?pathlinks?

Blame – Last modification – View Log – Download

--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -801,6 +801,13 @@ config SPI_TLE62X0
          sysfs interface, with each line presented as a kind of GPIO
          exposing both switch control and diagnostic feedback.
 
+config SPI_RB4XX_CPLD
+       tristate "MikroTik RB4XX CPLD driver"
+       depends on ATH79_MACH_RB4XX
+       help
+         SPI driver for the Xilinx CPLD chip present on the
+         MikroTik RB4xx boards.
+
 #
 # Add new SPI protocol masters in alphabetical order above this line
 #
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -78,6 +78,7 @@ spi-pxa2xx-platform-objs              := spi-pxa2xx.
 obj-$(CONFIG_SPI_PXA2XX)               += spi-pxa2xx-platform.o
 obj-$(CONFIG_SPI_PXA2XX_PCI)           += spi-pxa2xx-pci.o
 obj-$(CONFIG_SPI_RB4XX)                        += spi-rb4xx.o
+obj-$(CONFIG_SPI_RB4XX_CPLD)           += spi-rb4xx-cpld.o
 obj-$(CONFIG_SPI_QUP)                  += spi-qup.o
 obj-$(CONFIG_SPI_ROCKCHIP)             += spi-rockchip.o
 obj-$(CONFIG_SPI_RB4XX)                        += spi-rb4xx.o