OpenWrt – Rev 1
?pathlinks?
/*
* AirTight Networks C-55 board support
*
* Copyright (C) 2014-2015 Chris Blake <chrisrblake93@gmail.com>
*
* Based on Senao CAP4200AG board support
*
* Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/pci.h>
#include <linux/phy.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "pci.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-spi.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define C55_GPIO_LED_PWR_GREEN 12
#define C55_GPIO_LED_PWR_AMBER 13
#define C55_GPIO_LED_LAN_GREEN 14
#define C55_GPIO_LED_LAN_AMBER 15
#define C55_GPIO_LED_WLAN_GREEN 18
#define C55_GPIO_LED_WLAN_AMBER 19
#define C55_GPIO_BTN_RESET 17
#define C55_KEYS_POLL_INTERVAL 20 /* msecs */
#define C55_KEYS_DEBOUNCE_INTERVAL (3 * C55_KEYS_POLL_INTERVAL)
#define C55_MAC_OFFSET 0
#define C55_WMAC_CALDATA_OFFSET 0x1000
#define C55_PCIE_CALDATA_OFFSET 0x5000
static struct gpio_led c55_leds_gpio[] __initdata = {
{
.name = "c-55:green:pwr",
.gpio = C55_GPIO_LED_PWR_GREEN,
.active_low = 1,
},
{
.name = "c-55:amber:pwr",
.gpio = C55_GPIO_LED_PWR_AMBER,
.active_low = 1,
},
{
.name = "c-55:green:lan",
.gpio = C55_GPIO_LED_LAN_GREEN,
.active_low = 1,
},
{
.name = "c-55:amber:lan",
.gpio = C55_GPIO_LED_LAN_AMBER,
.active_low = 1,
},
{
.name = "c-55:green:wlan",
.gpio = C55_GPIO_LED_WLAN_GREEN,
.active_low = 1,
},
{
.name = "c-55:amber:wlan",
.gpio = C55_GPIO_LED_WLAN_AMBER,
.active_low = 1,
},
};
static struct gpio_keys_button c55_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = C55_KEYS_DEBOUNCE_INTERVAL,
.gpio = C55_GPIO_BTN_RESET,
.active_low = 1,
},
};
static void __init c55_setup(void)
{
/* SPI Storage*/
ath79_register_m25p80(NULL);
/* MDIO Interface */
ath79_register_mdio(0, 0x0);
/* AR8035-A Ethernet */
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
AR934X_ETH_CFG_SW_ONLY_MODE);
ath79_init_mac(ath79_eth0_data.mac_addr, NULL, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_pll_data.pll_1000 = 0x06000000;
ath79_register_eth(0);
/* LEDs & GPIO */
ath79_gpio_output_select(C55_GPIO_LED_LAN_GREEN,
AR934X_GPIO_OUT_GPIO);
ath79_gpio_output_select(C55_GPIO_LED_LAN_AMBER,
AR934X_GPIO_OUT_GPIO);
ath79_register_leds_gpio(-1, ARRAY_SIZE(c55_leds_gpio),
c55_leds_gpio);
ath79_register_gpio_keys_polled(-1, C55_KEYS_POLL_INTERVAL,
ARRAY_SIZE(c55_gpio_keys),
c55_gpio_keys);
/* WiFi */
ath79_wmac_disable_2ghz();
ath79_register_wmac_simple();
ap91_pci_init_simple();
}
MIPS_MACHINE(ATH79_MACH_C55, "C-55", "AirTight Networks C-55",
c55_setup);