OpenWrt – Rev 1

Subversion Repositories:
Rev:
/*
 *  BHU BXU2000n-2 A1 board support
 *
 *  Copyright (C) 2013 Terry Yang <yangbo@bhunetworks.com>
 *
 *  This program is free software; you can redistribute it and/or modify it
 *  under the terms of the GNU General Public License version 2 as published
 *  by the Free Software Foundation.
 */

#include <linux/gpio.h>
#include <linux/platform_device.h>

#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>

#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"

#define BHU_BXU2000N2_A1_GPIO_LED_WLAN          13
#define BHU_BXU2000N2_A1_GPIO_LED_WAN           19
#define BHU_BXU2000N2_A1_GPIO_LED_LAN           21
#define BHU_BXU2000N2_A1_GPIO_LED_SYSTEM        14

#define BHU_BXU2000N2_A1_GPIO_BTN_RESET         17

#define BHU_BXU2000N2_KEYS_POLL_INTERVAL        20      /* msecs */
#define BHU_BXU2000N2_KEYS_DEBOUNCE_INTERVAL    \
        (3 * BHU_BXU2000N2_KEYS_POLL_INTERVAL)

static const char *bhu_bxu2000n2_part_probes[] = {
        "cmdlinepart",
        NULL,
};

static struct flash_platform_data bhu_bxu2000n2_flash_data = {
        .part_probes    = bhu_bxu2000n2_part_probes,
};

static struct gpio_led bhu_bxu2000n2_a1_leds_gpio[] __initdata = {
        {
                .name           = "bhu:green:status",
                .gpio           = BHU_BXU2000N2_A1_GPIO_LED_SYSTEM,
                .active_low     = 1,
        }, {
                .name           = "bhu:green:lan",
                .gpio           = BHU_BXU2000N2_A1_GPIO_LED_LAN,
                .active_low     = 1,
        }, {
                .name           = "bhu:green:wan",
                .gpio           = BHU_BXU2000N2_A1_GPIO_LED_WAN,
                .active_low     = 1,
        }, {
                .name           = "bhu:green:wlan",
                .gpio           = BHU_BXU2000N2_A1_GPIO_LED_WLAN,
                .active_low     = 1,
        },
};

static struct gpio_keys_button bhu_bxu2000n2_a1_gpio_keys[] __initdata = {
        {
                .desc           = "Reset button",
                .type           = EV_KEY,
                .code           = KEY_RESTART,
                .debounce_interval = BHU_BXU2000N2_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = BHU_BXU2000N2_A1_GPIO_BTN_RESET,
                .active_low     = 1,
        }
};

static void __init bhu_ap123_setup(void)
{
        u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
        u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);

        ath79_register_m25p80(&bhu_bxu2000n2_flash_data);

        ath79_register_mdio(1, 0x0);

        ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
        ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);

        /* GMAC0 is connected to the PHY4 of the internal switch */
        ath79_switch_data.phy4_mii_en = 1;
        ath79_switch_data.phy_poll_mask = BIT(4);
        ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
        ath79_eth0_data.phy_mask = BIT(4);
        ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
        ath79_register_eth(0);

        /* GMAC1 is connected to the internal switch. Only use PHY3 */
        ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
        ath79_eth1_data.phy_mask = BIT(3);
        ath79_register_eth(1);

        ath79_register_wmac(ee, ee+2);
}

static void __init bhu_bxu2000n2_a1_setup(void)
{
        bhu_ap123_setup();

        ath79_register_leds_gpio(-1, ARRAY_SIZE(bhu_bxu2000n2_a1_leds_gpio),
                                 bhu_bxu2000n2_a1_leds_gpio);

        ath79_register_gpio_keys_polled(1, BHU_BXU2000N2_KEYS_POLL_INTERVAL,
                                        ARRAY_SIZE(bhu_bxu2000n2_a1_gpio_keys),
                                        bhu_bxu2000n2_a1_gpio_keys);
}

MIPS_MACHINE(ATH79_MACH_BHU_BXU2000N2_A1, "BXU2000n-2-A1",
             "BHU BXU2000n-2 rev. A1",
             bhu_bxu2000n2_a1_setup);