OpenWrt – Rev 1
?pathlinks?
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
# see docs/Kconfig-language.txt.
#
menu "Miscellaneous Utilities"
config BUSYBOX_CONFIG_ADJTIMEX
bool "adjtimex (4.7 kb)"
default BUSYBOX_DEFAULT_ADJTIMEX
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Adjtimex reads and optionally sets adjustment parameters for
the Linux clock adjustment algorithm.
config BUSYBOX_CONFIG_BBCONFIG
bool "bbconfig (9.7 kb)"
default BUSYBOX_DEFAULT_BBCONFIG
help
The bbconfig applet will print the config file with which
busybox was built.
config BUSYBOX_CONFIG_FEATURE_COMPRESS_BBCONFIG
bool "Compress bbconfig data"
default BUSYBOX_DEFAULT_FEATURE_COMPRESS_BBCONFIG
depends on BUSYBOX_CONFIG_BBCONFIG
help
Store bbconfig data in compressed form, uncompress them on-the-fly
before output.
If you have a really tiny busybox with few applets enabled (and
bunzip2 isn't one of them), the overhead of the decompressor might
be noticeable. Also, if you run executables directly from ROM
and have very little memory, this might not be a win. Otherwise,
you probably want this.
config BUSYBOX_CONFIG_BC
bool "bc (45 kb)"
default BUSYBOX_DEFAULT_BC
select BUSYBOX_CONFIG_FEATURE_DC_BIG
help
bc is a command-line, arbitrary-precision calculator with a
Turing-complete language. See the GNU bc manual
(https://www.gnu.org/software/bc/manual/bc.html) and bc spec
(http://pubs.opengroup.org/onlinepubs/9699919799/utilities/bc.html).
This bc has five differences to the GNU bc:
1) The period (.) is a shortcut for "last", as in the BSD bc.
2) Arrays are copied before being passed as arguments to
functions. This behavior is required by the bc spec.
3) Arrays can be passed to the builtin "length" function to get
the number of elements in the array. This prints "1":
a[0] = 0; length(a[])
4) The precedence of the boolean "not" operator (!) is equal to
that of the unary minus (-) negation operator. This still
allows POSIX-compliant scripts to work while somewhat
preserving expected behavior (versus C) and making parsing
easier.
5) "read()" accepts expressions, not only numeric literals.
config BUSYBOX_CONFIG_DC
bool "dc (36 kb)"
default BUSYBOX_DEFAULT_DC
help
dc is a reverse-polish notation command-line calculator which
supports unlimited precision arithmetic. See the FreeBSD man page
(https://www.unix.com/man-page/FreeBSD/1/dc/) and GNU dc manual
(https://www.gnu.org/software/bc/manual/dc-1.05/html_mono/dc.html).
This dc has a few differences from the two above:
1) When printing a byte stream (command "P"), this dc follows what
the FreeBSD dc does.
2) Implements the GNU extensions for divmod ("~") and
modular exponentiation ("|").
3) Implements all FreeBSD extensions, except for "J" and "M".
4) Like the FreeBSD dc, this dc supports extended registers.
However, they are implemented differently. When it encounters
whitespace where a register should be, it skips the whitespace.
If the character following is not a lowercase letter, an error
is issued. Otherwise, the register name is parsed by the
following regex: [a-z][a-z0-9_]*
This generally means that register names will be surrounded by
whitespace. Examples:
l idx s temp L index S temp2 < do_thing
Also note that, like the FreeBSD dc, extended registers are not
allowed unless the "-x" option is given.
if BC || BUSYBOX_CONFIG_DC # for menuconfig indenting
config BUSYBOX_CONFIG_FEATURE_DC_BIG
bool "Use bc code base for dc (larger, more features)"
default BUSYBOX_DEFAULT_FEATURE_DC_BIG
config BUSYBOX_CONFIG_FEATURE_DC_LIBM
bool "Enable power and exp functions (requires libm)"
default BUSYBOX_DEFAULT_FEATURE_DC_LIBM
depends on BUSYBOX_CONFIG_DC && !BUSYBOX_CONFIG_BC && !BUSYBOX_CONFIG_FEATURE_DC_BIG
help
Enable power and exp functions.
NOTE: This will require libm to be present for linking.
config BUSYBOX_CONFIG_FEATURE_BC_INTERACTIVE
bool "Interactive mode (+4kb)"
default BUSYBOX_DEFAULT_FEATURE_BC_INTERACTIVE
depends on BUSYBOX_CONFIG_BC || (BUSYBOX_CONFIG_DC && BUSYBOX_CONFIG_FEATURE_DC_BIG)
help
Enable interactive mode: when started on a tty,
^C interrupts execution and returns to command line,
errors also return to command line instead of exiting,
line editing with history is available.
With this option off, input can still be taken from tty,
but all errors are fatal, ^C is fatal,
tty is treated exactly the same as any other
standard input (IOW: no line editing).
config BUSYBOX_CONFIG_FEATURE_BC_LONG_OPTIONS
bool "Enable bc/dc long options"
default BUSYBOX_DEFAULT_FEATURE_BC_LONG_OPTIONS
depends on BUSYBOX_CONFIG_BC || (BUSYBOX_CONFIG_DC && BUSYBOX_CONFIG_FEATURE_DC_BIG)
endif
config BUSYBOX_CONFIG_BEEP
bool "beep (2.4 kb)"
default BUSYBOX_DEFAULT_BEEP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The beep applets beeps in a given freq/Hz.
config BUSYBOX_CONFIG_FEATURE_BEEP_FREQ
int "default frequency"
range 20 50000 # allowing 0 here breaks the build
default BUSYBOX_DEFAULT_FEATURE_BEEP_FREQ
depends on BUSYBOX_CONFIG_BEEP
help
Frequency for default beep.
config BUSYBOX_CONFIG_FEATURE_BEEP_LENGTH_MS
int "default length"
range 0 2147483647
default BUSYBOX_DEFAULT_FEATURE_BEEP_LENGTH_MS
depends on BUSYBOX_CONFIG_BEEP
help
Length in ms for default beep.
config BUSYBOX_CONFIG_CHAT
bool "chat (6.3 kb)"
default BUSYBOX_DEFAULT_CHAT
help
Simple chat utility.
config BUSYBOX_CONFIG_FEATURE_CHAT_NOFAIL
bool "Enable NOFAIL expect strings"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_NOFAIL
help
When enabled expect strings which are started with a dash trigger
no-fail mode. That is when expectation is not met within timeout
the script is not terminated but sends next SEND string and waits
for next EXPECT string. This allows to compose far more flexible
scripts.
config BUSYBOX_CONFIG_FEATURE_CHAT_TTY_HIFI
bool "Force STDIN to be a TTY"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_TTY_HIFI
help
Original chat always treats STDIN as a TTY device and sets for it
so-called raw mode. This option turns on such behaviour.
config BUSYBOX_CONFIG_FEATURE_CHAT_IMPLICIT_CR
bool "Enable implicit Carriage Return"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_IMPLICIT_CR
help
When enabled make chat to terminate all SEND strings with a "\r"
unless "\c" is met anywhere in the string.
config BUSYBOX_CONFIG_FEATURE_CHAT_SWALLOW_OPTS
bool "Swallow options"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_SWALLOW_OPTS
help
Busybox chat require no options. To make it not fail when used
in place of original chat (which has a bunch of options) turn
this on.
config BUSYBOX_CONFIG_FEATURE_CHAT_SEND_ESCAPES
bool "Support weird SEND escapes"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_SEND_ESCAPES
help
Original chat uses some escape sequences in SEND arguments which
are not sent to device but rather performs special actions.
E.g. "\K" means to send a break sequence to device.
"\d" delays execution for a second, "\p" -- for a 1/100 of second.
Before turning this option on think twice: do you really need them?
config BUSYBOX_CONFIG_FEATURE_CHAT_VAR_ABORT_LEN
bool "Support variable-length ABORT conditions"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_VAR_ABORT_LEN
help
Original chat uses fixed 50-bytes length ABORT conditions. Say N here.
config BUSYBOX_CONFIG_FEATURE_CHAT_CLR_ABORT
bool "Support revoking of ABORT conditions"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_CLR_ABORT
help
Support CLR_ABORT directive.
config BUSYBOX_CONFIG_CONSPY
bool "conspy (10 kb)"
default BUSYBOX_DEFAULT_CONSPY
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
A text-mode VNC like program for Linux virtual terminals.
example: conspy NUM shared access to console num
or conspy -nd NUM screenshot of console num
or conspy -cs NUM poor man's GNU screen like
config BUSYBOX_CONFIG_CROND
bool "crond (14 kb)"
default BUSYBOX_DEFAULT_CROND
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
Crond is a background daemon that parses individual crontab
files and executes commands on behalf of the users in question.
This is a port of dcron from slackware. It uses files of the
format /var/spool/cron/crontabs/<username> files, for example:
$ cat /var/spool/cron/crontabs/root
# Run daily cron jobs at 4:40 every day:
40 4 * * * /etc/cron/daily > /dev/null 2>&1
config BUSYBOX_CONFIG_FEATURE_CROND_D
bool "Support -d (redirect output to stderr)"
depends on BUSYBOX_CONFIG_CROND
default BUSYBOX_DEFAULT_FEATURE_CROND_D
help
-d N sets loglevel (0:most verbose) and directs all output to stderr.
config BUSYBOX_CONFIG_FEATURE_CROND_CALL_SENDMAIL
bool "Report command output via email (using sendmail)"
default BUSYBOX_DEFAULT_FEATURE_CROND_CALL_SENDMAIL
depends on BUSYBOX_CONFIG_CROND
help
Command output will be sent to corresponding user via email.
config BUSYBOX_CONFIG_FEATURE_CROND_SPECIAL_TIMES
bool "Support special times (@reboot, @daily, etc) in crontabs"
default BUSYBOX_DEFAULT_FEATURE_CROND_SPECIAL_TIMES
depends on BUSYBOX_CONFIG_CROND
help
string meaning
------ -------
@reboot Run once, at startup
@yearly Run once a year: "0 0 1 1 *"
@annually Same as @yearly: "0 0 1 1 *"
@monthly Run once a month: "0 0 1 * *"
@weekly Run once a week: "0 0 * * 0"
@daily Run once a day: "0 0 * * *"
@midnight Same as @daily: "0 0 * * *"
@hourly Run once an hour: "0 * * * *"
config BUSYBOX_CONFIG_FEATURE_CROND_DIR
string "crond spool directory"
default BUSYBOX_DEFAULT_FEATURE_CROND_DIR
depends on BUSYBOX_CONFIG_CROND || BUSYBOX_CONFIG_CRONTAB
help
Location of crond spool.
config BUSYBOX_CONFIG_CRONTAB
bool "crontab (10 kb)"
default BUSYBOX_DEFAULT_CRONTAB
help
Crontab manipulates the crontab for a particular user. Only
the superuser may specify a different user and/or crontab directory.
Note that busybox binary must be setuid root for this applet to
work properly.
config BUSYBOX_CONFIG_DEVFSD
bool "devfsd (obsolete)"
default BUSYBOX_DEFAULT_DEVFSD
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
This is deprecated and should NOT be used anymore.
Use linux >= 2.6 (optionally with hotplug) and mdev instead!
See docs/mdev.txt for detailed instructions on how to use mdev
instead.
Provides compatibility with old device names on a devfs systems.
You should set it to true if you have devfs enabled.
The following keywords in devsfd.conf are supported:
"CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE",
"PERMISSIONS", "EXECUTE", "COPY", "IGNORE",
"MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT".
But only if they are written UPPERCASE!!!!!!!!
config BUSYBOX_CONFIG_DEVFSD_MODLOAD
bool "Adds support for MODLOAD keyword in devsfd.conf"
default BUSYBOX_DEFAULT_DEVFSD_MODLOAD
depends on BUSYBOX_CONFIG_DEVFSD
help
This actually doesn't work with busybox modutils but needs
the external modutils.
config BUSYBOX_CONFIG_DEVFSD_FG_NP
bool "Enable the -fg and -np options"
default BUSYBOX_DEFAULT_DEVFSD_FG_NP
depends on BUSYBOX_CONFIG_DEVFSD
help
-fg Run the daemon in the foreground.
-np Exit after parsing config. Do not poll for events.
config BUSYBOX_CONFIG_DEVFSD_VERBOSE
bool "Increases logging (and size)"
default BUSYBOX_DEFAULT_DEVFSD_VERBOSE
depends on BUSYBOX_CONFIG_DEVFSD
help
Increases logging to stderr or syslog.
config BUSYBOX_CONFIG_FEATURE_DEVFS
bool "Use devfs names for all devices (obsolete)"
default BUSYBOX_DEFAULT_FEATURE_DEVFS
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This is obsolete and should NOT be used anymore.
Use linux >= 2.6 (optionally with hotplug) and mdev instead!
For legacy systems -- if there is no way around devfsd -- this
tells busybox to look for names like /dev/loop/0 instead of
/dev/loop0. If your /dev directory has normal names instead of
devfs names, you don't want this.
config BUSYBOX_CONFIG_DEVMEM
bool "devmem (2.5 kb)"
default BUSYBOX_DEFAULT_DEVMEM
help
devmem is a small program that reads and writes from physical
memory using /dev/mem.
config BUSYBOX_CONFIG_FBSPLASH
bool "fbsplash (26 kb)"
default BUSYBOX_DEFAULT_FBSPLASH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Shows splash image and progress bar on framebuffer device.
Can be used during boot phase of an embedded device.
Usage:
- use kernel option 'vga=xxx' or otherwise enable fb device.
- put somewhere fbsplash.cfg file and an image in .ppm format.
- $ setsid fbsplash [params] &
-c: hide cursor
-d /dev/fbN: framebuffer device (if not /dev/fb0)
-s path_to_image_file (can be "-" for stdin)
-i path_to_cfg_file (can be "-" for stdin)
-f path_to_fifo (can be "-" for stdin)
- if you want to run it only in presence of kernel parameter:
grep -q "fbsplash=on" </proc/cmdline && setsid fbsplash [params] &
- commands for fifo:
"NN" (ASCII decimal number) - percentage to show on progress bar
"exit" - well you guessed it
config BUSYBOX_CONFIG_FLASH_ERASEALL
bool "flash_eraseall (5.9 kb)"
default BUSYBOX_DEFAULT_FLASH_ERASEALL # doesn't build on Ubuntu 8.04
help
The flash_eraseall binary from mtd-utils as of git head c4c6a59eb.
This utility is used to erase the whole MTD device.
config BUSYBOX_CONFIG_FLASH_LOCK
bool "flash_lock (2.1 kb)"
default BUSYBOX_DEFAULT_FLASH_LOCK # doesn't build on Ubuntu 8.04
help
The flash_lock binary from mtd-utils as of git head 5ec0c10d0. This
utility locks part or all of the flash device.
config BUSYBOX_CONFIG_FLASH_UNLOCK
bool "flash_unlock (1.3 kb)"
default BUSYBOX_DEFAULT_FLASH_UNLOCK # doesn't build on Ubuntu 8.04
help
The flash_unlock binary from mtd-utils as of git head 5ec0c10d0. This
utility unlocks part or all of the flash device.
config BUSYBOX_CONFIG_FLASHCP
bool "flashcp (5.3 kb)"
default BUSYBOX_DEFAULT_FLASHCP # doesn't build on Ubuntu 8.04
help
The flashcp binary, inspired by mtd-utils as of git head 5eceb74f7.
This utility is used to copy images into a MTD device.
config BUSYBOX_CONFIG_HDPARM
bool "hdparm (25 kb)"
default BUSYBOX_DEFAULT_HDPARM
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Get/Set hard drive parameters. Primarily intended for ATA
drives.
config BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY
bool "Support obtaining detailed information directly from drives"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_GET_IDENTITY
depends on BUSYBOX_CONFIG_HDPARM
help
Enable the -I and -i options to obtain detailed information
directly from drives about their capabilities and supported ATA
feature set. If no device name is specified, hdparm will read
identify data from stdin. Enabling this option will add about 16k...
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF
bool "Register an IDE interface (DANGEROUS)"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_SCAN_HWIF
depends on BUSYBOX_CONFIG_HDPARM
help
Enable the 'hdparm -R' option to register an IDE interface.
This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
bool "Un-register an IDE interface (DANGEROUS)"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
depends on BUSYBOX_CONFIG_HDPARM
help
Enable the 'hdparm -U' option to un-register an IDE interface.
This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
bool "Perform device reset (DANGEROUS)"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_DRIVE_RESET
depends on BUSYBOX_CONFIG_HDPARM
help
Enable the 'hdparm -w' option to perform a device reset.
This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
bool "Tristate device for hotswap (DANGEROUS)"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
depends on BUSYBOX_CONFIG_HDPARM
help
Enable the 'hdparm -x' option to tristate device for hotswap,
and the '-b' option to get/set bus state. This is dangerous
stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
bool "Get/set using_dma flag"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_GETSET_DMA
depends on BUSYBOX_CONFIG_HDPARM
help
Enable the 'hdparm -d' option to get/set using_dma flag.
config BUSYBOX_CONFIG_HEXEDIT
bool "hexedit (21 kb)"
default BUSYBOX_DEFAULT_HEXEDIT
help
Edit file in hexadecimal.
config BUSYBOX_CONFIG_I2CGET
bool "i2cget (5.5 kb)"
default BUSYBOX_DEFAULT_I2CGET
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Read from I2C/SMBus chip registers.
config BUSYBOX_CONFIG_I2CSET
bool "i2cset (6.7 kb)"
default BUSYBOX_DEFAULT_I2CSET
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Set I2C registers.
config BUSYBOX_CONFIG_I2CDUMP
bool "i2cdump (7.1 kb)"
default BUSYBOX_DEFAULT_I2CDUMP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Examine I2C registers.
config BUSYBOX_CONFIG_I2CDETECT
bool "i2cdetect (7.1 kb)"
default BUSYBOX_DEFAULT_I2CDETECT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Detect I2C chips.
config BUSYBOX_CONFIG_INOTIFYD
bool "inotifyd (3.6 kb)"
default BUSYBOX_DEFAULT_INOTIFYD # doesn't build on Knoppix 5
help
Simple inotify daemon. Reports filesystem changes. Requires
kernel >= 2.6.13
config BUSYBOX_CONFIG_LESS
bool "less (16 kb)"
default BUSYBOX_DEFAULT_LESS
help
'less' is a pager, meaning that it displays text files. It possesses
a wide array of features, and is an improvement over 'more'.
config BUSYBOX_CONFIG_FEATURE_LESS_MAXLINES
int "Max number of input lines less will try to eat"
default BUSYBOX_DEFAULT_FEATURE_LESS_MAXLINES
depends on BUSYBOX_CONFIG_LESS
config BUSYBOX_CONFIG_FEATURE_LESS_BRACKETS
bool "Enable bracket searching"
default BUSYBOX_DEFAULT_FEATURE_LESS_BRACKETS
depends on BUSYBOX_CONFIG_LESS
help
This option adds the capability to search for matching left and right
brackets, facilitating programming.
config BUSYBOX_CONFIG_FEATURE_LESS_FLAGS
bool "Enable -m/-M"
default BUSYBOX_DEFAULT_FEATURE_LESS_FLAGS
depends on BUSYBOX_CONFIG_LESS
help
The -M/-m flag enables a more sophisticated status line.
config BUSYBOX_CONFIG_FEATURE_LESS_TRUNCATE
bool "Enable -S"
default BUSYBOX_DEFAULT_FEATURE_LESS_TRUNCATE
depends on BUSYBOX_CONFIG_LESS
help
The -S flag causes long lines to be truncated rather than
wrapped.
config BUSYBOX_CONFIG_FEATURE_LESS_MARKS
bool "Enable marks"
default BUSYBOX_DEFAULT_FEATURE_LESS_MARKS
depends on BUSYBOX_CONFIG_LESS
help
Marks enable positions in a file to be stored for easy reference.
config BUSYBOX_CONFIG_FEATURE_LESS_REGEXP
bool "Enable regular expressions"
default BUSYBOX_DEFAULT_FEATURE_LESS_REGEXP
depends on BUSYBOX_CONFIG_LESS
help
Enable regular expressions, allowing complex file searches.
config BUSYBOX_CONFIG_FEATURE_LESS_WINCH
bool "Enable automatic resizing on window size changes"
default BUSYBOX_DEFAULT_FEATURE_LESS_WINCH
depends on BUSYBOX_CONFIG_LESS
help
Makes less track window size changes.
config BUSYBOX_CONFIG_FEATURE_LESS_ASK_TERMINAL
bool "Use 'tell me cursor position' ESC sequence to measure window"
default BUSYBOX_DEFAULT_FEATURE_LESS_ASK_TERMINAL
depends on BUSYBOX_CONFIG_FEATURE_LESS_WINCH
help
Makes less track window size changes.
If terminal size can't be retrieved and $LINES/$COLUMNS are not set,
this option makes less perform a last-ditch effort to find it:
position cursor to 999,999 and ask terminal to report real
cursor position using "ESC [ 6 n" escape sequence, then read stdin.
This is not clean but helps a lot on serial lines and such.
config BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD
bool "Enable flag changes ('-' command)"
default BUSYBOX_DEFAULT_FEATURE_LESS_DASHCMD
depends on BUSYBOX_CONFIG_LESS
help
This enables the ability to change command-line flags within
less itself ('-' keyboard command).
config BUSYBOX_CONFIG_FEATURE_LESS_LINENUMS
bool "Enable -N (dynamic switching of line numbers)"
default BUSYBOX_DEFAULT_FEATURE_LESS_LINENUMS
depends on BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD
config BUSYBOX_CONFIG_FEATURE_LESS_RAW
bool "Enable -R ('raw control characters')"
default BUSYBOX_DEFAULT_FEATURE_LESS_RAW
depends on BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD
help
This is essential for less applet to work with tools that use colors
and paging, such as git, systemd tools or nmcli.
config BUSYBOX_CONFIG_FEATURE_LESS_ENV
bool "Take options from $LESS environment variable"
default BUSYBOX_DEFAULT_FEATURE_LESS_ENV
depends on BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD
help
This is essential for less applet to work with tools that use colors
and paging, such as git, systemd tools or nmcli.
config BUSYBOX_CONFIG_LOCK
bool "lock"
default BUSYBOX_DEFAULT_LOCK
help
Small utility for using locks in scripts
config BUSYBOX_CONFIG_LSSCSI
bool "lsscsi (2.5 kb)"
default BUSYBOX_DEFAULT_LSSCSI
#select PLATFORM_LINUX
help
lsscsi is a utility for displaying information about SCSI buses in the
system and devices connected to them.
This version uses sysfs (/sys/bus/scsi/devices) only.
config BUSYBOX_CONFIG_MAKEDEVS
bool "makedevs (9.2 kb)"
default BUSYBOX_DEFAULT_MAKEDEVS
help
'makedevs' is a utility used to create a batch of devices with
one command.
There are two choices for command line behaviour, the interface
as used by LEAF/Linux Router Project, or a device table file.
'leaf' is traditionally what busybox follows, it allows multiple
devices of a particluar type to be created per command.
e.g. /dev/hda[0-9]
Device properties are passed as command line arguments.
'table' reads device properties from a file or stdin, allowing
a batch of unrelated devices to be made with one command.
User/group names are allowed as an alternative to uid/gid.
choice
prompt "Choose makedevs behaviour"
depends on BUSYBOX_CONFIG_MAKEDEVS
default BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE
config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_LEAF
bool "leaf"
config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE
bool "table"
endchoice
config BUSYBOX_CONFIG_MAN
bool "man (26 kb)"
default BUSYBOX_DEFAULT_MAN
help
Format and display manual pages.
config BUSYBOX_CONFIG_MICROCOM
bool "microcom (5.7 kb)"
default BUSYBOX_DEFAULT_MICROCOM
help
The poor man's minicom utility for chatting with serial port devices.
config BUSYBOX_CONFIG_MT
bool "mt (2.5 kb)"
default BUSYBOX_DEFAULT_MT
help
mt is used to control tape devices. You can use the mt utility
to advance or rewind a tape past a specified number of archive
files on the tape.
config BUSYBOX_CONFIG_NANDWRITE
bool "nandwrite (4.8 kb)"
default BUSYBOX_DEFAULT_NANDWRITE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Write to the specified MTD device, with bad blocks awareness
config BUSYBOX_CONFIG_NANDDUMP
bool "nanddump (5.2 kb)"
default BUSYBOX_DEFAULT_NANDDUMP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Dump the content of raw NAND chip
config BUSYBOX_CONFIG_PARTPROBE
bool "partprobe (3.5 kb)"
default BUSYBOX_DEFAULT_PARTPROBE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Ask kernel to rescan partition table.
config BUSYBOX_CONFIG_RAIDAUTORUN
bool "raidautorun (1.3 kb)"
default BUSYBOX_DEFAULT_RAIDAUTORUN
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
raidautorun tells the kernel md driver to
search and start RAID arrays.
config BUSYBOX_CONFIG_READAHEAD
bool "readahead (1.5 kb)"
default BUSYBOX_DEFAULT_READAHEAD
depends on BUSYBOX_CONFIG_LFS
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Preload the files listed on the command line into RAM cache so that
subsequent reads on these files will not block on disk I/O.
This applet just calls the readahead(2) system call on each file.
It is mainly useful in system startup scripts to preload files
or executables before they are used. When used at the right time
(in particular when a CPU bound process is running) it can
significantly speed up system startup.
As readahead(2) blocks until each file has been read, it is best to
run this applet as a background job.
config BUSYBOX_CONFIG_RFKILL
bool "rfkill (4.4 kb)"
default BUSYBOX_DEFAULT_RFKILL # doesn't build on Ubuntu 9.04
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Enable/disable wireless devices.
rfkill list : list all wireless devices
rfkill list bluetooth : list all bluetooth devices
rfkill list 1 : list device corresponding to the given index
rfkill block|unblock wlan : block/unblock all wlan(wifi) devices
config BUSYBOX_CONFIG_RUNLEVEL
bool "runlevel (559 bytes)"
default BUSYBOX_DEFAULT_RUNLEVEL
depends on BUSYBOX_CONFIG_FEATURE_UTMP
help
Find the current and previous system runlevel.
This applet uses utmp but does not rely on busybox supporing
utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.
config BUSYBOX_CONFIG_RX
bool "rx (2.9 kb)"
default BUSYBOX_DEFAULT_RX
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Receive files using the Xmodem protocol.
config BUSYBOX_CONFIG_SETFATTR
bool "setfattr (3.7 kb)"
default BUSYBOX_DEFAULT_SETFATTR
help
Set/delete extended attributes on files
config BUSYBOX_CONFIG_SETSERIAL
bool "setserial (6.9 kb)"
default BUSYBOX_DEFAULT_SETSERIAL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Retrieve or set Linux serial port.
config BUSYBOX_CONFIG_STRINGS
bool "strings (4.6 kb)"
default BUSYBOX_DEFAULT_STRINGS
help
strings prints the printable character sequences for each file
specified.
config BUSYBOX_CONFIG_TIME
bool "time (6.8 kb)"
default BUSYBOX_DEFAULT_TIME
help
The time command runs the specified program with the given arguments.
When the command finishes, time writes a message to standard output
giving timing statistics about this program run.
config BUSYBOX_CONFIG_TTYSIZE
bool "ttysize (432 bytes)"
default BUSYBOX_DEFAULT_TTYSIZE
help
A replacement for "stty size". Unlike stty, can report only width,
only height, or both, in any order. It also does not complain on
error, but returns default 80x24.
Usage in shell scripts: width=`ttysize w`.
config BUSYBOX_CONFIG_UBIATTACH
bool "ubiattach (4.2 kb)"
default BUSYBOX_DEFAULT_UBIATTACH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Attach MTD device to an UBI device.
config BUSYBOX_CONFIG_UBIDETACH
bool "ubidetach (4.1 kb)"
default BUSYBOX_DEFAULT_UBIDETACH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Detach MTD device from an UBI device.
config BUSYBOX_CONFIG_UBIMKVOL
bool "ubimkvol (5.3 kb)"
default BUSYBOX_DEFAULT_UBIMKVOL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Create a UBI volume.
config BUSYBOX_CONFIG_UBIRMVOL
bool "ubirmvol (4.9 kb)"
default BUSYBOX_DEFAULT_UBIRMVOL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Delete a UBI volume.
config BUSYBOX_CONFIG_UBIRSVOL
bool "ubirsvol (4.2 kb)"
default BUSYBOX_DEFAULT_UBIRSVOL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Resize a UBI volume.
config BUSYBOX_CONFIG_UBIUPDATEVOL
bool "ubiupdatevol (5.2 kb)"
default BUSYBOX_DEFAULT_UBIUPDATEVOL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Update a UBI volume.
config BUSYBOX_CONFIG_UBIRENAME
bool "ubirename (2.4 kb)"
default BUSYBOX_DEFAULT_UBIRENAME
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Utility to rename UBI volumes
config BUSYBOX_CONFIG_VOLNAME
bool "volname (1.6 kb)"
default BUSYBOX_DEFAULT_VOLNAME
help
Prints a CD-ROM volume name.
config BUSYBOX_CONFIG_WATCHDOG
bool "watchdog (5.3 kb)"
default BUSYBOX_DEFAULT_WATCHDOG
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The watchdog utility is used with hardware or software watchdog
device drivers. It opens the specified watchdog device special file
and periodically writes a magic character to the device. If the
watchdog applet ever fails to write the magic character within a
certain amount of time, the watchdog device assumes the system has
hung, and will cause the hardware to reboot.
endmenu