OpenWrt – Rev 1
?pathlinks?
From e1a08730eeb0bad4d82c3bc40e74854872de618d Mon Sep 17 00:00:00 2001
From: Wright Feng <wright.feng@cypress.com>
Date: Wed, 21 Nov 2018 07:53:44 +0000
Subject: [PATCH] brcmfmac: set F2 watermark to 256 for 4373
We got SDIO_CRC_ERROR with 4373 on SDR104 when doing bi-directional
throughput test. Enable watermark to 256 to guarantee the operation
stability.
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
.../broadcom/brcm80211/brcmfmac/sdio.c | 26 +++++++++++++++++--
1 file changed, 24 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -49,6 +49,10 @@
#define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500)
#define CTL_DONE_TIMEOUT msecs_to_jiffies(2500)
+/* watermark expressed in number of words */
+#define DEFAULT_F2_WATERMARK 0x8
+#define CY_4373_F2_WATERMARK 0x40
+
#ifdef DEBUG
#define BRCMF_TRAP_INFO_SIZE 80
@@ -138,6 +142,8 @@ struct rte_console {
/* 1: isolate internal sdio signals, put external pads in tri-state; requires
* sdio bus power cycle to clear (rev 9) */
#define SBSDIO_DEVCTL_PADS_ISO 0x08
+/* 1: enable F2 Watermark */
+#define SBSDIO_DEVCTL_F2WM_ENAB 0x10
/* Force SD->SB reset mapping (rev 11) */
#define SBSDIO_DEVCTL_SB_RST_CTL 0x30
/* Determined by CoreControl bit */
@@ -4046,6 +4052,7 @@ static void brcmf_sdio_firmware_callback
void *nvram;
u32 nvram_len;
u8 saveclk;
+ u8 devctl;
brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err);
@@ -4101,8 +4108,23 @@ static void brcmf_sdio_firmware_callback
brcmf_sdiod_writel(sdiod, core->base + SD_REG(hostintmask),
bus->hostintmask, NULL);
-
- brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, 8, &err);
+ switch (sdiod->func1->device) {
+ case SDIO_DEVICE_ID_CYPRESS_4373:
+ brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",
+ CY_4373_F2_WATERMARK);
+ brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
+ CY_4373_F2_WATERMARK, &err);
+ devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL,
+ &err);
+ devctl |= SBSDIO_DEVCTL_F2WM_ENAB;
+ brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
+ &err);
+ break;
+ default:
+ brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
+ DEFAULT_F2_WATERMARK, &err);
+ break;
+ }
} else {
/* Disable F2 again */
sdio_disable_func(sdiod->func2);