OpenWrt – Rev 1
?pathlinks?
/******************************************************************************
**
** FILE NAME : ifxmips_atm_core.h
** PROJECT : UEIP
** MODULES : ATM
**
** DATE : 7 Jul 2009
** AUTHOR : Xu Liang
** DESCRIPTION : ATM driver header file (core functions)
** COPYRIGHT : Copyright (c) 2006
** Infineon Technologies AG
** Am Campeon 1-12, 85579 Neubiberg, Germany
**
** This program is free software; you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation; either version 2 of the License, or
** (at your option) any later version.
**
** HISTORY
** $Date $Author $Comment
** 17 JUN 2009 Xu Liang Init Version
*******************************************************************************/
#ifndef IFXMIPS_ATM_CORE_H
#define IFXMIPS_ATM_CORE_H
#define INT_NUM_IM2_IRL24 (INT_NUM_IM2_IRL0 + 24)
#define INT_NUM_IM2_IRL13 (INT_NUM_IM2_IRL0 + 13)
#define CONFIG_IFXMIPS_DSL_CPE_MEI
#define IFX_REG_W32(_v, _r) __raw_writel((_v), (volatile unsigned int *)(_r))
#define IFX_REG_R32(_r) __raw_readl((volatile unsigned int *)(_r))
#define IFX_REG_W32_MASK(_clr, _set, _r) IFX_REG_W32((IFX_REG_R32((_r)) & ~(_clr)) | (_set), (_r))
#define SET_BITS(x, msb, lsb, value) (((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | (((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb)))
struct ltq_atm_ops {
void (*init)(void);
void (*shutdown)(void);
int (*start)(int pp32);
void (*stop)(int pp32);
void (*fw_ver)(unsigned int *major, unsigned int *minor);
};
#include <linux/atomic.h>
#include <lantiq_atm.h>
/*
* ####################################
* Definition
* ####################################
*/
/*
* Compile Options
*/
#define ENABLE_DEBUG 1
#define ENABLE_ASSERT 1
#define INLINE
#define DEBUG_DUMP_SKB 1
#define DEBUG_QOS 1
#define DISABLE_QOS_WORKAROUND 0
#define ENABLE_DBG_PROC 1
#define ENABLE_FW_PROC 1
#ifdef CONFIG_IFX_ATM_TASKLET
#define ENABLE_TASKLET 1
#endif
#ifdef CONFIG_IFX_ATM_RETX
#define ENABLE_ATM_RETX 1
#endif
#if defined(CONFIG_DSL_MEI_CPE_DRV) && !defined(CONFIG_IFXMIPS_DSL_CPE_MEI)
#define CONFIG_IFXMIPS_DSL_CPE_MEI 1
#endif
/*
* Debug/Assert/Error Message
*/
#define ifx_atm_dbg_enable 1
#define DBG_ENABLE_MASK_ERR (1 << 0)
#define DBG_ENABLE_MASK_DEBUG_PRINT (1 << 1)
#define DBG_ENABLE_MASK_ASSERT (1 << 2)
#define DBG_ENABLE_MASK_DUMP_SKB_RX (1 << 8)
#define DBG_ENABLE_MASK_DUMP_SKB_TX (1 << 9)
#define DBG_ENABLE_MASK_DUMP_QOS (1 << 10)
#define DBG_ENABLE_MASK_DUMP_INIT (1 << 11)
#define DBG_ENABLE_MASK_MAC_SWAP (1 << 12)
#define DBG_ENABLE_MASK_ALL (DBG_ENABLE_MASK_ERR | DBG_ENABLE_MASK_DEBUG_PRINT | DBG_ENABLE_MASK_ASSERT | DBG_ENABLE_MASK_DUMP_SKB_RX | DBG_ENABLE_MASK_DUMP_SKB_TX | DBG_ENABLE_MASK_DUMP_QOS | DBG_ENABLE_MASK_DUMP_INIT | DBG_ENABLE_MASK_MAC_SWAP)
#if defined(ENABLE_ASSERT) && ENABLE_ASSERT
#define ASSERT(cond, format, arg...) do { if ( (ifx_atm_dbg_enable & DBG_ENABLE_MASK_ASSERT) && !(cond) ) printk(KERN_ERR __FILE__ ":%d:%s: " format "\n", __LINE__, __FUNCTION__, ##arg); } while ( 0 )
#else
#define ASSERT(cond, format, arg...)
#endif
/*
* Constants
*/
#define DEFAULT_TX_LINK_RATE 3200 // in cells
/*
* ATM Port, QSB Queue, DMA RX/TX Channel Parameters
*/
#define ATM_PORT_NUMBER 2
#define MAX_QUEUE_NUMBER 16
#define OAM_RX_QUEUE 15
#define QSB_RESERVE_TX_QUEUE 0
#define FIRST_QSB_QID 1
#define MAX_PVC_NUMBER (MAX_QUEUE_NUMBER - FIRST_QSB_QID)
#define MAX_RX_DMA_CHANNEL_NUMBER 8
#define MAX_TX_DMA_CHANNEL_NUMBER 16
#define DATA_BUFFER_ALIGNMENT EMA_ALIGNMENT
#define DESC_ALIGNMENT 8
#define DEFAULT_RX_HUNT_BITTH 4
/*
* RX DMA Channel Allocation
*/
#define RX_DMA_CH_OAM 0
#define RX_DMA_CH_AAL 1
#define RX_DMA_CH_TOTAL 2
#define RX_DMA_CH_OAM_DESC_LEN 32
#define RX_DMA_CH_OAM_BUF_SIZE ((CELL_SIZE + 14) & ~15)
#define RX_DMA_CH_AAL_BUF_SIZE (2048 - 48)
/*
* OAM Constants
*/
#define OAM_HTU_ENTRY_NUMBER 3
#define OAM_F4_SEG_HTU_ENTRY 0
#define OAM_F4_TOT_HTU_ENTRY 1
#define OAM_F5_HTU_ENTRY 2
#define OAM_F4_CELL_ID 0
#define OAM_F5_CELL_ID 15
#if defined(ENABLE_ATM_RETX) && ENABLE_ATM_RETX
#undef OAM_HTU_ENTRY_NUMBER
#define OAM_HTU_ENTRY_NUMBER 4
#define OAM_ARQ_HTU_ENTRY 3
#endif
/*
* RX Frame Definitions
*/
#define MAX_RX_PACKET_ALIGN_BYTES 3
#define MAX_RX_PACKET_PADDING_BYTES 3
#define RX_INBAND_TRAILER_LENGTH 8
#define MAX_RX_FRAME_EXTRA_BYTES (RX_INBAND_TRAILER_LENGTH + MAX_RX_PACKET_ALIGN_BYTES + MAX_RX_PACKET_PADDING_BYTES)
/*
* TX Frame Definitions
*/
#define MAX_TX_HEADER_ALIGN_BYTES 12
#define MAX_TX_PACKET_ALIGN_BYTES 3
#define MAX_TX_PACKET_PADDING_BYTES 3
#define TX_INBAND_HEADER_LENGTH 8
#define MAX_TX_FRAME_EXTRA_BYTES (TX_INBAND_HEADER_LENGTH + MAX_TX_HEADER_ALIGN_BYTES + MAX_TX_PACKET_ALIGN_BYTES + MAX_TX_PACKET_PADDING_BYTES)
#define CELL_SIZE ATM_AAL0_SDU
#if defined(ENABLE_ATM_RETX) && ENABLE_ATM_RETX
#define RETX_PLAYOUT_BUFFER_ORDER 6
#define RETX_PLAYOUT_BUFFER_SIZE (PAGE_SIZE * (1 << RETX_PLAYOUT_BUFFER_ORDER))
#define RETX_PLAYOUT_FW_BUFF_SIZE (RETX_PLAYOUT_BUFFER_SIZE / (32 * 56 /* cell size */))
#define RETX_POLLING_INTERVAL (HZ / 100 > 0 ? HZ / 100 : 1)
#endif
typedef struct {
unsigned int h;
unsigned int l;
} ppe_u64_t;
struct port {
unsigned int tx_max_cell_rate;
unsigned int tx_current_cell_rate;
struct atm_dev *dev;
};
struct connection {
struct atm_vcc *vcc;
volatile struct tx_descriptor *tx_desc;
unsigned int tx_desc_pos;
struct sk_buff **tx_skb;
spinlock_t lock;
unsigned int aal5_vcc_crc_err; /* number of packets with CRC error */
unsigned int aal5_vcc_oversize_sdu; /* number of packets with oversize error */
unsigned int port;
};
struct atm_priv_data {
unsigned long conn_table;
struct connection conn[MAX_PVC_NUMBER];
volatile struct rx_descriptor *aal_desc;
unsigned int aal_desc_pos;
volatile struct rx_descriptor *oam_desc;
unsigned char *oam_buf;
unsigned int oam_desc_pos;
struct port port[ATM_PORT_NUMBER];
unsigned int wrx_pdu; /* successfully received AAL5 packet */
unsigned int wrx_drop_pdu; /* AAL5 packet dropped by driver on RX */
unsigned int wtx_pdu; /* successfully transmitted AAL5 packet */
unsigned int wtx_err_pdu; /* error AAL5 packet */
unsigned int wtx_drop_pdu; /* AAL5 packet dropped by driver on TX */
unsigned int wrx_oam; /* successfully received OAM cell */
unsigned int wrx_drop_oam; /* OAM cell dropped by driver on RX */
unsigned int wtx_oam; /* successfully transmitted OAM cell */
unsigned int wtx_err_oam; /* error during transmiting OAM cell */
unsigned int wtx_drop_oam; /* OAM cell dropped by driver on TX */
ppe_u64_t wrx_total_byte;
ppe_u64_t wtx_total_byte;
unsigned int prev_wrx_total_byte;
unsigned int prev_wtx_total_byte;
void *aal_desc_base;
void *oam_desc_base;
void *oam_buf_base;
void *tx_desc_base;
void *tx_skb_base;
};
#include "ifxmips_atm_ppe_common.h"
#include "ifxmips_atm_fw_regs_common.h"
#endif