OpenWrt – Rev 1
?pathlinks?
--- a/cppi_cpaal5.c
+++ b/cppi_cpaal5.c
@@ -360,7 +360,7 @@ static int halRxReturn(HAL_RECEIVEINFO *
{
/* malloc failed, add this RCB to Needs Buffer List */
TempRcb->FragCount = 1; /*MJH+030417*/
- (HAL_RCB *)TempRcb->Eop = TempRcb; /* GSG +030430 */
+ TempRcb->Eop = TempRcb; /* GSG +030430 */
if(HalDev->NeedsCount < MAX_NEEDS) /* +MJH 030410 */
{ /* +MJH 030410 */
--- a/dsl_hal_api.c
+++ b/dsl_hal_api.c
@@ -273,15 +273,15 @@
* 09/15/07 CPH CQ11466 Added EFM support
* 09/27/07 EYin CQ11929: Added NFEC/INP/Lp/Rp reporting for only ADSL2/2+ mode.
******************************************************************************/
-#include <dev_host_interface.h>
-#include <dsl_hal_register.h>
-#include <dsl_hal_support.h>
+#include "dev_host_interface.h"
+#include "dsl_hal_register.h"
+#include "dsl_hal_support.h"
#ifndef NO_ADV_STATS
-#include <dsl_hal_logtable.h>
+#include "dsl_hal_logtable.h"
#endif
-#include <dsl_hal_version.h>
+#include "dsl_hal_version.h"
// UR8_MERGE_START CQ11054 Jack Zhang
static unsigned int highprecision_selected = 0; //By default we use low precision for backward compt.
--- a/dsl_hal_support.c
+++ b/dsl_hal_support.c
@@ -142,9 +142,9 @@
* UR8_MERGE_START_END CQ11922 Tim
* 04Sep07 0.14.00 Tim CQ11922: Added support for new scratchram for INP NDR tables
*******************************************************************************/
-#include <dev_host_interface.h>
-#include <dsl_hal_register.h>
-#include <dsl_hal_support.h>
+#include "dev_host_interface.h"
+#include "dsl_hal_register.h"
+#include "dsl_hal_support.h"
#define NUM_READ_RETRIES 3
static unsigned int dslhal_support_adsl2ByteSwap32(unsigned int in32Bits);
--- a/dsl_hal_support.h
+++ b/dsl_hal_support.h
@@ -49,7 +49,7 @@
* 04Nov05 0.11.00 CPH Fixed T1413 mode got Zero DS/US rate when DSL_BIT_TMODE is set.
*******************************************************************************/
-#include <dsl_hal_api.h>
+#include "dsl_hal_api.h"
#define virtual2Physical(a) (((int)a)&~0xe0000000)
/* External Function Prototype Declarations */
--- a/Makefile
+++ b/Makefile
@@ -1,18 +1,9 @@
-# File: drivers/atm/ti_evm3/Makefile
#
-# Makefile for the Texas Instruments EVM3 ADSL/ATM driver.
+# Makefile for the TIATM device driver.
#
-#
-# Copyright (c) 2000 Texas Instruments Incorporated.
-# Jeff Harrell (jharrell@telogy.com)
-# Viren Balar (vbalar@ti.com)
-# Victor Wells (vwells@telogy.com)
-#
-include $(TOPDIR)/Rules.make
-
-
-
-
-
-
+CONFIG_SANGAM_ATM=m
+#EXTRA_CFLAGS += -DEL -I. -DPOST_SILICON -DCOMMON_NSP -DCONFIG_LED_MODULE -DDEREGISTER_LED -DNO_ACT
+EXTRA_CFLAGS += -DEL -I$(PWD) -DPOST_SILICON -DCOMMON_NSP -DNO_ACT -D__NO__VOICE_PATCH__ -DEL
+obj-$(CONFIG_SANGAM_ATM) := tiatm.o
+tiatm-objs += cpsar.o aal5sar.o tn7sar.o tn7atm.o tn7dsl.o dsl_hal_api.o dsl_hal_support.o
--- a/tn7atm.c
+++ b/tn7atm.c
@@ -66,7 +66,6 @@
* 09/18/07 CPH CQ11466 Added EFM Support
*********************************************************************************************/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -74,11 +73,14 @@
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
-#include <asm/io.h>
-#include <asm/mips-boards/prom.h>
#include <linux/proc_fs.h>
#include <linux/string.h>
#include <linux/ctype.h>
+
+#include <asm/io.h>
+#include <asm/ar7/ar7.h>
+#include <asm/ar7/prom.h>
+
#include "dsl_hal_api.h"
#ifdef AR7_EFM
#include "tn7efm.h"
@@ -90,6 +92,7 @@
#include "dsl_hal_register.h"
#ifdef MODULE
+MODULE_LICENSE("GPL");
MODULE_DESCRIPTION ("Tnetd73xx ATM Device Driver");
MODULE_AUTHOR ("Zhicheng Tang");
#endif
@@ -108,9 +111,9 @@ MODULE_AUTHOR ("Zhicheng Tang");
/*end of externs */
-#ifndef TI_STATIC_ALLOCATIONS
-#define TI_STATIC_ALLOCATIONS
-#endif
+//#ifndef TI_STATIC_ALLOCATIONS
+//#define TI_STATIC_ALLOCATIONS
+//#endif
#define tn7atm_kfree_skb(x) dev_kfree_skb(x)
@@ -135,7 +138,7 @@ static int EnableQoS = FALSE;
/* prototypes */
static int tn7atm_set_can_support_adsl2 (int can);
-static int tn7atm_open (struct atm_vcc *vcc, short vpi, int vci);
+static int tn7atm_open (struct atm_vcc *vcc);
void tn7atm_close (struct atm_vcc *vcc);
@@ -298,13 +301,12 @@ static const struct atmdev_ops tn7atm_op
getsockopt: NULL,
setsockopt: NULL,
send: tn7atm_send,
- sg_send: NULL,
phy_put: NULL,
phy_get: NULL,
change_qos: tn7atm_change_qos,
};
-const char drv_proc_root_folder[] = "avalanche/";
+const char drv_proc_root_folder[] = "avalanche";
static struct proc_dir_entry *root_proc_dir_entry = NULL;
#define DRV_PROC_MODE 0644
static int proc_root_already_exists = TRUE;
@@ -626,56 +628,6 @@ static int turbodsl_check_priority_type(
/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
- * Function: int tn7atm_walk_vccs(struct atm_dev *dev, short *vcc, int *vci)
- *
- * Description: retrieve VPI/VCI for connection
- *
- *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-static int tn7atm_walk_vccs (struct atm_vcc *vcc, short *vpi, int *vci)
-{
- struct atm_vcc *walk;
-
- /*
- * find a free VPI
- */
- if (*vpi == ATM_VPI_ANY)
- {
-
- for (*vpi = 0, walk = vcc->dev->vccs; walk; walk = walk->next)
- {
-
- if ((walk->vci == *vci) && (walk->vpi == *vpi))
- {
- (*vpi)++;
- walk = vcc->dev->vccs;
- }
- }
- }
-
- /*
- * find a free VCI
- */
- if (*vci == ATM_VCI_ANY)
- {
-
- for (*vci = ATM_NOT_RSV_VCI, walk = vcc->dev->vccs; walk;
- walk = walk->next)
- {
-
- if ((walk->vpi = *vpi) && (walk->vci == *vci))
- {
- *vci = walk->vci + 1;
- walk = vcc->dev->vccs;
- }
- }
- }
-
- return 0;
-}
-
-
-/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
* Function: int tn7atm_sar_irq(void)
*
* Description: tnetd73xx SAR interrupt.
@@ -766,7 +718,7 @@ static int __init tn7atm_irq_request (st
priv->sar_irq = LNXINTNUM (ATM_SAR_INT); /* Interrupt line # */
- if (request_irq (priv->sar_irq, tn7atm_sar_irq, SA_INTERRUPT, "SAR ", dev))
+ if (request_irq (priv->sar_irq, tn7atm_sar_irq, IRQF_DISABLED, "SAR ", dev))
printk ("Could not register tn7atm_sar_irq\n");
/*
@@ -777,8 +729,8 @@ static int __init tn7atm_irq_request (st
{
def_sar_inter_pace = os_atoi (ptr);
}
- avalanche_request_pacing (priv->sar_irq, ATM_SAR_INT_PACING_BLOCK_NUM,
- def_sar_inter_pace);
+ /* avalanche_request_pacing (priv->sar_irq, ATM_SAR_INT_PACING_BLOCK_NUM,
+ def_sar_inter_pace); */
#ifdef AR7_EFM
@@ -790,7 +742,7 @@ static int __init tn7atm_irq_request (st
* Reigster Receive interrupt A
*/
priv->dsl_irq = LNXINTNUM (ATM_DSL_INT); /* Interrupt line # */
- if (request_irq (priv->dsl_irq, tn7atm_dsl_irq, SA_INTERRUPT, "DSL ", dev))
+ if (request_irq (priv->dsl_irq, tn7atm_dsl_irq, IRQF_DISABLED, "DSL ", dev))
printk ("Could not register tn7atm_dsl_irq\n");
/***** VRB Tasklet Mode ****/
@@ -958,11 +910,15 @@ static int __init tn7atm_get_ESI (struct
#define ATM_VBR_RT 5
#endif
-int tn7atm_open (struct atm_vcc *vcc, short vpi, int vci)
+int tn7atm_open (struct atm_vcc *vcc)
{
tn7atm_activate_vc_parm_t tn7atm_activate_vc_parm;
int rc;
//int flags;
+ tn7atm_activate_vc_parm.pcr = 0x20000;
+ tn7atm_activate_vc_parm.scr = 0x20000;
+ tn7atm_activate_vc_parm.mbs = 0x20000;
+ tn7atm_activate_vc_parm.cdvt = 10000;
dgprintf(1, "tn7atm_open()\n");
@@ -974,24 +930,18 @@ int tn7atm_open (struct atm_vcc *vcc, sh
return -1;
}
- MOD_INC_USE_COUNT;
+// MOD_INC_USE_COUNT;
- /* find a free VPI/VCI */
- tn7atm_walk_vccs(vcc, &vpi, &vci);
-
- vcc->vpi = vpi;
- vcc->vci = vci;
-
- if ((vci == ATM_VCI_UNSPEC) || (vpi == ATM_VCI_UNSPEC))
+ if ((vcc->vci == ATM_VCI_UNSPEC) || (vcc->vpi == ATM_VCI_UNSPEC))
{
- MOD_DEC_USE_COUNT;
+// MOD_DEC_USE_COUNT;
return -EBUSY;
}
- tn7atm_activate_vc_parm.vpi = vpi;
- tn7atm_activate_vc_parm.vci = vci;
+ tn7atm_activate_vc_parm.vpi = vcc->vpi;
+ tn7atm_activate_vc_parm.vci = vcc->vci;
- if ((vpi == CLEAR_EOC_VPI) && (vci == CLEAR_EOC_VCI))
+ if ((vcc->vpi == CLEAR_EOC_VPI) && (vcc->vci == CLEAR_EOC_VCI))
{
/* always use (max_dma_chan+1) for clear eoc */
tn7atm_activate_vc_parm.chan = EOC_DMA_CHAN;
@@ -999,7 +949,7 @@ int tn7atm_open (struct atm_vcc *vcc, sh
/* check to see whether clear eoc is opened or not */
if (tn7atm_activate_vc_parm.priv->lut[tn7atm_activate_vc_parm.chan].inuse)
{
- MOD_DEC_USE_COUNT;
+// MOD_DEC_USE_COUNT;
printk("tn7atm_open: Clear EOC channel (dmachan=%d) already in use.\n", tn7atm_activate_vc_parm.chan);
return -EBUSY;
}
@@ -1008,7 +958,7 @@ int tn7atm_open (struct atm_vcc *vcc, sh
if (rc)
{
printk("tn7atm_open: failed to setup clear_eoc\n");
- MOD_DEC_USE_COUNT;
+// MOD_DEC_USE_COUNT;
return -EBUSY;
}
tn7atm_set_lut(tn7atm_activate_vc_parm.priv,vcc, tn7atm_activate_vc_parm.chan);
@@ -1017,17 +967,17 @@ int tn7atm_open (struct atm_vcc *vcc, sh
}
else /* PVC channel setup */
{
- if ((vpi==REMOTE_MGMT_VPI) && (vci==REMOTE_MGMT_VCI))
+ if ((vcc->vpi==REMOTE_MGMT_VPI) && (vcc->vci==REMOTE_MGMT_VCI))
{
tn7atm_activate_vc_parm.chan = 14; /* always use chan 14 for MII PVC-base romote mgmt */
}
else
{
- rc = tn7atm_lut_find(vpi, vci);
+ rc = tn7atm_lut_find(vcc->vpi, vcc->vci);
/* check to see whether PVC is opened or not */
if(ATM_NO_DMA_CHAN != rc)
{
- MOD_DEC_USE_COUNT;
+// MOD_DEC_USE_COUNT;
printk("PVC already opened. dmachan = %d\n", rc);
return -EBUSY;
}
@@ -1059,6 +1009,7 @@ int tn7atm_open (struct atm_vcc *vcc, sh
tn7atm_activate_vc_parm.priority = 2;
break;
+#if 0
case ATM_VBR: /* Variable Bit Rate-Non RealTime*/
tn7atm_activate_vc_parm.qos = 1;
tn7atm_activate_vc_parm.priority = 1;
@@ -1080,6 +1031,7 @@ int tn7atm_open (struct atm_vcc *vcc, sh
tn7atm_activate_vc_parm.mbs = vcc->qos.txtp.max_pcr;
tn7atm_activate_vc_parm.cdvt = vcc->qos.txtp.max_cdv;
break;
+#endif
default:
tn7atm_activate_vc_parm.qos = 2;
@@ -1107,7 +1059,7 @@ int tn7atm_open (struct atm_vcc *vcc, sh
if (rc < 0)
{
printk("failed to activate hw channel\n");
- MOD_DEC_USE_COUNT;
+// MOD_DEC_USE_COUNT;
tn7atm_lut_clear(vcc, tn7atm_activate_vc_parm.chan);
//spin_unlock_irqrestore(&chan_init_lock, flags);
return -EBUSY;
@@ -1197,7 +1149,7 @@ void tn7atm_close (struct atm_vcc *vcc)
tn7atm_lut_clear (vcc, dmachan);
//spin_unlock_irqrestore (&closeLock, closeFlag);
- MOD_DEC_USE_COUNT;
+// MOD_DEC_USE_COUNT;
dgprintf (1, "Leave tn7atm_close\n");
}
@@ -1630,8 +1582,7 @@ int tn7atm_receive (void *os_dev, int ch
* firewall is on */
dgprintf (3, "pushing the skb...\n");
-
- skb->stamp = vcc->timestamp = xtime;
+ __net_timestamp(skb);
xdump ((unsigned char *) skb->data, skb->len, 5);
@@ -1854,8 +1805,7 @@ printk("!!!free atm irq: tn7atm_exit\n")
kfree (dev->dev_data);
- // atm_dev_deregister (dev);
- shutdown_atm_dev (dev);
+ atm_dev_deregister (dev);
/*
* remove proc entries
@@ -2086,9 +2036,6 @@ static int __init tn7atm_detect (void)
* Set up proc entry for atm stats
*/
- if (tn7atm_xlate_proc_name
- (drv_proc_root_folder, &root_proc_dir_entry, &residual))
- {
printk ("Creating new root folder %s in the proc for the driver stats \n",
drv_proc_root_folder);
root_proc_dir_entry = proc_mkdir (drv_proc_root_folder, NULL);
@@ -2098,7 +2045,6 @@ static int __init tn7atm_detect (void)
return -ENOMEM;
}
proc_root_already_exists = FALSE;
- }
/*
@@ -2731,7 +2677,5 @@ int tn7atm_proc_turbodsl_write(struct fi
return count;
}
-#ifdef MODULE
module_init (tn7atm_detect);
module_exit (tn7atm_exit);
-#endif /* MODULE */
--- a/tn7atm.h
+++ b/tn7atm.h
@@ -20,7 +20,8 @@
//#include "mips_support.h"
#include <linux/list.h>
-#include <linux/config.h>
+#define MIPS_EXCEPTION_OFFSET 8
+#define LNXINTNUM(x)((x) + MIPS_EXCEPTION_OFFSET)
#ifdef CONFIG_MODVERSIONS
#include <linux/modversions.h>
--- a/tn7dsl.c
+++ b/tn7dsl.c
@@ -102,7 +102,6 @@
* UR8_MERGE_END CQ11813
* 09/18/07 CPH CQ11466: Added EFM support.
*********************************************************************************************/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -110,8 +109,6 @@
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
-#include <asm/io.h>
-#include <asm/mips-boards/prom.h>
#include <linux/proc_fs.h>
#include <linux/string.h>
#include <linux/ctype.h>
@@ -119,6 +116,12 @@
#include <linux/timer.h>
#include <linux/vmalloc.h>
#include <linux/file.h>
+#include <linux/firmware.h>
+
+#include <asm/io.h>
+#include <asm/ar7/ar7.h>
+#include <asm/ar7/prom.h>
+
/* Modules specific header files */
#ifdef AR7_EFM
#include "tn7efm.h"
@@ -185,7 +188,7 @@ led_reg_t ledreg[2];
static struct led_funcs ledreg[2];
#endif
-#define DEV_DSLMOD 1
+#define DEV_DSLMOD CTL_UNNUMBERED
#define MAX_STR_SIZE 256
#define DSL_MOD_SIZE 256
@@ -316,7 +319,7 @@ static PITIDSLHW_T pIhw;
static volatile int bshutdown;
static char info[MAX_STR_SIZE];
/* Used for DSL Polling enable */
-static DECLARE_MUTEX_LOCKED (adsl_sem_overlay);
+static struct semaphore adsl_sem_overlay;
//kthread_t overlay_thread;
/* end of module wide declars */
@@ -369,6 +372,14 @@ int os_atoih (const char *pstr)
return val;
}
+int avalanche_request_intr_pacing(int irq_nr, unsigned int blk_num,
+ unsigned int pace_value)
+{
+ printk("avalanche_request_pacing(%d, %u, %u); // not implemented\n", irq_nr, blk_num, pace_value);
+ return 0;
+}
+
+
int os_atoi(const char *pStr)
{
int MulNeg = (*pStr == '-' ? -1 : 1);
@@ -405,39 +416,6 @@ void dprintf (int uDbgLevel, char *szFmt
#endif
}
-int strcmp(const char *s1, const char *s2)
-{
-
- int size = strlen(s1);
-
- return(strncmp(s1, s2, size));
-}
-
-int strncmp(const char *s1, const char *s2, size_t size)
-{
- int i = 0;
- int max_size = (int)size;
-
- while((s1[i] != 0) && i < max_size)
- {
- if(s2[i] == 0)
- {
- return -1;
- }
- if(s1[i] != s2[i])
- {
- return 1;
- }
- i++;
- }
- if(s2[i] != 0)
- {
- return 1;
- }
-
- return 0;
-}
-
// * UR8_MERGE_START CQ10640 Jack Zhang
int tn7dsl_dump_dsp_memory(char *input_str) //cph99
{
@@ -487,144 +465,78 @@ unsigned int shim_osGetCpuFrequency(void
return CpuFrequency;
}
-int shim_osLoadFWImage(unsigned char *ptr)
+static void avsar_release(struct device *dev)
{
- unsigned int bytesRead;
- mm_segment_t oldfs;
- static struct file *filp;
- unsigned int imageLength=0x5ffff;
-
-#ifdef AR7_EFM
- int dp_alt=0;
- char *ptr1=NULL;
-#ifdef EFM_DEBUG
- char *ptr2=NULL;
- char *ptr3=NULL;
-#endif
-
- if ((ptr1 = prom_getenv("DSL_DP_ALT")) != NULL)
- {
- dp_alt=os_atoi(ptr1);
- if (dp_alt==1)
- {
- filp = filp_open(DSP_DEBUG_FIRMWARE_PATH,00,O_RDONLY);
- if (!IS_ERR(filp))
- {
- strcpy (DSP_FIRMWARE_PATH, DSP_DEBUG_FIRMWARE_PATH);
- }
- }
-#ifdef EFM_DEBUG
- else if (dp_alt==2)
- {
- if ((ptr2 = prom_getenv("DSL_DP")) != NULL)
- {
- if (!strncmp(ptr2, "DSL_DP", 6))
- { // indirect naming
- if ((ptr3 = prom_getenv(ptr2)) != NULL)
- filp = filp_open(ptr3,00,O_RDONLY);
- ptr2 = ptr3; // redirect ptr2 to ptr3
- }
-
- filp = filp_open(ptr2,00,O_RDONLY);
- if (!IS_ERR(filp))
- {
- strcpy (DSP_FIRMWARE_PATH, ptr2);
- }
- }
- }
- printk("dp_path=%s\n", DSP_FIRMWARE_PATH);
-#endif
- }
-#endif
-
- dgprintf(4, "tn7dsl_read_dsp()\n");
-
- dgprintf(4,"open file %s\n", DSP_FIRMWARE_PATH);
-
- filp=filp_open(DSP_FIRMWARE_PATH,00,O_RDONLY);
- if(IS_ERR(filp))
- {
- printk("Failed: Could not open DSP binary file\n");
- return -1;
- }
-
- if (filp->f_dentry != NULL)
- {
- if (filp->f_dentry->d_inode != NULL)
- {
- printk ("DSP binary filesize = %d bytes\n",
- (int) filp->f_dentry->d_inode->i_size);
- imageLength = (unsigned int)filp->f_dentry->d_inode->i_size + 0x200;
- }
- }
-
- if (filp->f_op->read==NULL)
- return -1; /* File(system) doesn't allow reads */
-
- /*
- * Disable parameter checking
- */
- oldfs = get_fs();
- set_fs(KERNEL_DS);
-
- /*
- * Now read bytes from postion "StartPos"
- */
- filp->f_pos = 0;
-
- bytesRead = filp->f_op->read(filp,ptr,imageLength,&filp->f_pos);
-
- dgprintf(4,"file length = %d\n", bytesRead);
-
- set_fs(oldfs);
-
- /*
- * Close the file
- */
- fput(filp);
-
- return bytesRead;
+ printk(KERN_DEBUG "avsar firmware released\n");
}
+static struct device avsar = {
+ .bus_id = "vlynq",
+ .release = avsar_release,
+};
-unsigned int shim_read_overlay_page (void *ptr, unsigned int secOffset,
- unsigned int secLength)
+int shim_osLoadFWImage(unsigned char *ptr)
{
- unsigned int bytesRead;
- mm_segment_t oldfs;
- struct file *filp;
-
- dgprintf(4,"shim_read_overlay_page\n");
- //dgprintf(4,"sec offset=%d, sec length =%d\n", secOffset, secLength);
+ const struct firmware *fw_entry;
+ size_t size;
- filp=filp_open(DSP_FIRMWARE_PATH,00,O_RDONLY);
- if(filp ==NULL)
- {
- printk("Failed: Could not open DSP binary file\n");
- return -1;
- }
-
- if (filp->f_op->read==NULL)
- return -1; /* File(system) doesn't allow reads */
-
- /*
- * Now read bytes from postion "StartPos"
- */
+ printk("requesting firmware image \"ar0700xx.bin\"\n");
+ if(device_register(&avsar) < 0) {
+ printk(KERN_ERR
+ "avsar: device_register fails\n");
+ return -1;
+ }
+
+ if (request_firmware(&fw_entry, "ar0700xx.bin", &avsar)) {
+ printk(KERN_ERR
+ "avsar: Firmware not available\n");
+ device_unregister(&avsar);
+ return -1;
+ }
+ size = fw_entry->size;
+ device_unregister(&avsar);
+ if (size > 0x6ffff) {
+ printk(KERN_ERR
+ "avsar: Firmware too big (%d bytes)\n", size);
+ release_firmware(fw_entry);
+ return -1;
+ }
+ memcpy(ptr, fw_entry->data, size);
+ release_firmware(fw_entry);
+ return size;
+}
+
+unsigned int shim_read_overlay_page(void *ptr, unsigned int secOffset, unsigned int secLength)
+{
+ const struct firmware *fw_entry;
+
+ printk("requesting firmware image \"ar0700xx.bin\"\n");
+ if (device_register(&avsar) < 0) {
+ printk(KERN_ERR
+ "avsar: device_register fails\n");
+ return -1;
+ }
+
+ if (request_firmware(&fw_entry, "ar0700xx.bin", &avsar)) {
+ printk(KERN_ERR
+ "avsar: Firmware not available\n");
+ device_unregister(&avsar);
+ return -1;
+ }
+
+ device_unregister(&avsar);
+ if (fw_entry->size > secLength) {
+ printk(KERN_ERR
+ "avsar: Firmware too big (%d bytes)\n", fw_entry->size);
+ release_firmware(fw_entry);
+ return -1;
+ }
+ memcpy(ptr + secOffset, fw_entry->data, secLength);
+ release_firmware(fw_entry);
+ return secLength;
+}
- if(filp->f_op->llseek)
- filp->f_op->llseek(filp,secOffset, 0);
- oldfs = get_fs();
- set_fs(KERNEL_DS);
- filp->f_pos = secOffset;
- bytesRead = filp->f_op->read(filp,ptr,secLength,&filp->f_pos);
- set_fs(oldfs);
- /*
- * Close the file
- */
- fput(filp);
- return bytesRead;
-}
int shim_osLoadDebugFWImage(unsigned char *ptr)
{
@@ -3287,6 +3199,7 @@ int tn7dsl_init(void *priv)
int high_precision_selected = 0;
// UR8_MERGE_END CQ11054*
+ sema_init(&adsl_sem_overlay, 0);
/*
* start dsl
*/
@@ -3665,7 +3578,7 @@ static int dslmod_sysctl(ctl_table *ctl,
*/
if(write)
{
- ret = proc_dostring(ctl, write, filp, buffer, lenp);
+ ret = proc_dostring(ctl, write, filp, buffer, lenp, 0);
switch (ctl->ctl_name)
{
@@ -3751,14 +3664,14 @@ static int dslmod_sysctl(ctl_table *ctl,
else
{
len += sprintf(info+len, mod_req);
- ret = proc_dostring(ctl, write, filp, buffer, lenp);
+ ret = proc_dostring(ctl, write, filp, buffer, lenp, 0);
}
return ret;
}
ctl_table dslmod_table[] = {
- {DEV_DSLMOD, "dslmod", info, DSL_MOD_SIZE, 0644, NULL, &dslmod_sysctl}
+ {DEV_DSLMOD, "dslmod", info, DSL_MOD_SIZE, 0644, NULL, NULL, &dslmod_sysctl, &sysctl_string}
,
{0}
};
@@ -3781,8 +3694,7 @@ void tn7dsl_dslmod_sysctl_register(void)
if (initialized == 1)
return;
- dslmod_sysctl_header = register_sysctl_table(dslmod_root_table, 1);
- dslmod_root_table->child->de->owner = THIS_MODULE;
+ dslmod_sysctl_header = register_sysctl_table(dslmod_root_table);
/*
* set the defaults
--- a/tn7sar.c
+++ b/tn7sar.c
@@ -43,7 +43,6 @@
* 09/18/07 CPH CQ11466: Added EFM support.
*******************************************************************************/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -51,12 +50,13 @@
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
-#include <asm/io.h>
-#include <asm/mips-boards/prom.h>
#include <linux/proc_fs.h>
#include <linux/string.h>
#include <linux/ctype.h>
+#include <asm/io.h>
+#include <asm/ar7/ar7.h>
+#include <asm/ar7/prom.h>
#define _CPHAL_AAL5
#define _CPHAL_SAR