OpenWrt – Rev 1
?pathlinks?
From 17fa032671f7981628fe16b30399638842a4b1bb Mon Sep 17 00:00:00 2001
From: Heiko Schocher <hs@denx.de>
Date: Wed, 18 Jan 2017 08:05:49 +0100
Subject: [PATCH] serial, ns16550: bugfix: ns16550 fifo not enabled
commit: 65f83802b7a5b "serial: 16550: Add getfcr accessor"
breaks u-boot commandline working with long commands
sending to the board.
Since the above patch, you have to setup the fcr register.
For board/archs which enable OF_PLATDATA, the new field
fcr in struct ns16550_platdata is not filled with a
default value ...
This leads in not setting up the uarts fifo, which ends
in problems, when you send long commands to u-boots
commandline.
Detected this issue with automated tbot tests on am335x
based shc board.
The error does not popup, if you type commands. You need
to copy&paste a long command to u-boots commandshell
(or send a long command with tbot)
Possible boards/plattforms with problems:
./arch/arm/cpu/arm926ejs/lpc32xx/devices.c
./arch/arm/mach-tegra/board.c
./board/overo/overo.c
./board/quipos/cairo/cairo.c
./board/logicpd/omap3som/omap3logic.c
./board/logicpd/zoom1/zoom1.c
./board/timll/devkit8000/devkit8000.c
./board/lg/sniper/sniper.c
./board/ti/beagle/beagle.c
./drivers/serial/serial_rockchip.c
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---
arch/arm/cpu/arm926ejs/lpc32xx/devices.c | 12 ++++++++----
arch/arm/mach-omap2/am33xx/board.c | 18 ++++++++++++------
arch/arm/mach-tegra/board.c | 1 +
board/isee/igep00x0/igep00x0.c | 3 ++-
board/lg/sniper/sniper.c | 3 ++-
board/logicpd/omap3som/omap3logic.c | 3 ++-
board/logicpd/zoom1/zoom1.c | 3 ++-
board/overo/overo.c | 3 ++-
board/quipos/cairo/cairo.c | 3 ++-
board/ti/beagle/beagle.c | 3 ++-
board/timll/devkit8000/devkit8000.c | 3 ++-
drivers/serial/ns16550.c | 9 +++------
drivers/serial/serial_rockchip.c | 1 +
include/ns16550.h | 5 +++++
14 files changed, 46 insertions(+), 24 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
index 399b07c5420a..f744398ca7ad 100644
--- a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
@@ -45,10 +45,14 @@ void lpc32xx_uart_init(unsigned int uart_id)
#if !CONFIG_IS_ENABLED(OF_CONTROL)
static const struct ns16550_platdata lpc32xx_uart[] = {
- { .base = UART3_BASE, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
- { .base = UART4_BASE, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
- { .base = UART5_BASE, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
- { .base = UART6_BASE, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
+ { .base = UART3_BASE, .reg_shift = 2,
+ .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+ { .base = UART4_BASE, .reg_shift = 2,
+ .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+ { .base = UART5_BASE, .reg_shift = 2,
+ .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+ { .base = UART6_BASE, .reg_shift = 2,
+ .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
};
#if defined(CONFIG_LPC32XX_HSUART)
diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c
index 73824df18fa7..190310fd0079 100644
--- a/arch/arm/mach-omap2/am33xx/board.c
+++ b/arch/arm/mach-omap2/am33xx/board.c
@@ -40,14 +40,20 @@ DECLARE_GLOBAL_DATA_PTR;
#if !CONFIG_IS_ENABLED(OF_CONTROL)
static const struct ns16550_platdata am33xx_serial[] = {
- { .base = CONFIG_SYS_NS16550_COM1, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
+ { .base = CONFIG_SYS_NS16550_COM1, .reg_shift = 2,
+ .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
# ifdef CONFIG_SYS_NS16550_COM2
- { .base = CONFIG_SYS_NS16550_COM2, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
+ { .base = CONFIG_SYS_NS16550_COM2, .reg_shift = 2,
+ .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
# ifdef CONFIG_SYS_NS16550_COM3
- { .base = CONFIG_SYS_NS16550_COM3, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
- { .base = CONFIG_SYS_NS16550_COM4, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
- { .base = CONFIG_SYS_NS16550_COM5, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
- { .base = CONFIG_SYS_NS16550_COM6, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
+ { .base = CONFIG_SYS_NS16550_COM3, .reg_shift = 2,
+ .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+ { .base = CONFIG_SYS_NS16550_COM4, .reg_shift = 2,
+ .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+ { .base = CONFIG_SYS_NS16550_COM5, .reg_shift = 2,
+ .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+ { .base = CONFIG_SYS_NS16550_COM6, .reg_shift = 2,
+ .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
# endif
# endif
};
diff --git a/arch/arm/mach-tegra/board.c b/arch/arm/mach-tegra/board.c
index 3d1d26d13d13..b3a041b539af 100644
--- a/arch/arm/mach-tegra/board.c
+++ b/arch/arm/mach-tegra/board.c
@@ -219,6 +219,7 @@ static struct ns16550_platdata ns16550_com1_pdata = {
.base = CONFIG_SYS_NS16550_COM1,
.reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK,
+ .fcr = UART_FCR_DEFVAL,
};
U_BOOT_DEVICE(ns16550_com1) = {
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index ae7959b1eb6e..5a3498f570a6 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -32,7 +32,8 @@ DECLARE_GLOBAL_DATA_PTR;
static const struct ns16550_platdata igep_serial = {
.base = OMAP34XX_UART3,
.reg_shift = 2,
- .clock = V_NS16550_CLK
+ .clock = V_NS16550_CLK,
+ .fcr = UART_FCR_DEFVAL,
};
U_BOOT_DEVICE(igep_uart) = {
diff --git a/board/lg/sniper/sniper.c b/board/lg/sniper/sniper.c
index 0662449c3875..b2b8f8861f11 100644
--- a/board/lg/sniper/sniper.c
+++ b/board/lg/sniper/sniper.c
@@ -31,7 +31,8 @@ const omap3_sysinfo sysinfo = {
static const struct ns16550_platdata serial_omap_platdata = {
.base = OMAP34XX_UART3,
.reg_shift = 2,
- .clock = V_NS16550_CLK
+ .clock = V_NS16550_CLK,
+ .fcr = UART_FCR_DEFVAL,
};
U_BOOT_DEVICE(sniper_serial) = {
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index 21b3fdcf49cf..b2fcc28f8b4b 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -49,7 +49,8 @@ DECLARE_GLOBAL_DATA_PTR;
static const struct ns16550_platdata omap3logic_serial = {
.base = OMAP34XX_UART1,
.reg_shift = 2,
- .clock = V_NS16550_CLK
+ .clock = V_NS16550_CLK,
+ .fcr = UART_FCR_DEFVAL,
};
U_BOOT_DEVICE(omap3logic_uart) = {
diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c
index 2821ee22674f..0fad23af62f6 100644
--- a/board/logicpd/zoom1/zoom1.c
+++ b/board/logicpd/zoom1/zoom1.c
@@ -47,7 +47,8 @@ static const u32 gpmc_lab_enet[] = {
static const struct ns16550_platdata zoom1_serial = {
.base = OMAP34XX_UART3,
.reg_shift = 2,
- .clock = V_NS16550_CLK
+ .clock = V_NS16550_CLK,
+ .fcr = UART_FCR_DEFVAL,
};
U_BOOT_DEVICE(zoom1_uart) = {
diff --git a/board/overo/overo.c b/board/overo/overo.c
index 40f13e5876cc..5e447262bcfd 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -70,7 +70,8 @@ static struct {
static const struct ns16550_platdata overo_serial = {
.base = OMAP34XX_UART3,
.reg_shift = 2,
- .clock = V_NS16550_CLK
+ .clock = V_NS16550_CLK,
+ .fcr = UART_FCR_DEFVAL,
};
U_BOOT_DEVICE(overo_uart) = {
diff --git a/board/quipos/cairo/cairo.c b/board/quipos/cairo/cairo.c
index 77e4482906f0..793aa9023150 100644
--- a/board/quipos/cairo/cairo.c
+++ b/board/quipos/cairo/cairo.c
@@ -93,7 +93,8 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
static const struct ns16550_platdata cairo_serial = {
.base = OMAP34XX_UART2,
.reg_shift = 2,
- .clock = V_NS16550_CLK
+ .clock = V_NS16550_CLK,
+ .fcr = UART_FCR_DEFVAL,
};
U_BOOT_DEVICE(cairo_uart) = {
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index cfdab3e34253..23c79333a223 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -75,7 +75,8 @@ static struct {
static const struct ns16550_platdata beagle_serial = {
.base = OMAP34XX_UART3,
.reg_shift = 2,
- .clock = V_NS16550_CLK
+ .clock = V_NS16550_CLK,
+ .fcr = UART_FCR_DEFVAL,
};
U_BOOT_DEVICE(beagle_uart) = {
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index f785dbe6d732..b2f060b2ddbf 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -48,7 +48,8 @@ static u32 gpmc_net_config[GPMC_MAX_REG] = {
static const struct ns16550_platdata devkit8000_serial = {
.base = OMAP34XX_UART3,
.reg_shift = 2,
- .clock = V_NS16550_CLK
+ .clock = V_NS16550_CLK,
+ .fcr = UART_FCR_DEFVAL,
};
U_BOOT_DEVICE(devkit8000_uart) = {
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 9b423a591d8a..2df4a1f04fe5 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -20,9 +20,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */
#define UART_MCRVAL (UART_MCR_DTR | \
UART_MCR_RTS) /* RTS/DTR */
-#define UART_FCRVAL (UART_FCR_FIFO_EN | \
- UART_FCR_RXSR | \
- UART_FCR_TXSR) /* Clear & enable FIFOs */
#ifndef CONFIG_DM_SERIAL
#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
@@ -138,7 +135,7 @@ static u32 ns16550_getfcr(NS16550_t port)
#else
static u32 ns16550_getfcr(NS16550_t port)
{
- return UART_FCRVAL;
+ return UART_FCR_DEFVAL;
}
#endif
@@ -275,7 +272,7 @@ static inline void _debug_uart_init(void)
CONFIG_BAUDRATE);
serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER);
serial_dout(&com_port->mcr, UART_MCRVAL);
- serial_dout(&com_port->fcr, UART_FCRVAL);
+ serial_dout(&com_port->fcr, UART_FCR_DEFVAL);
serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL);
serial_dout(&com_port->dll, baud_divisor & 0xff);
@@ -440,7 +437,7 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
return -EINVAL;
}
- plat->fcr = UART_FCRVAL;
+ plat->fcr = UART_FCR_DEFVAL;
if (port_type == PORT_JZ4780)
plat->fcr |= UART_FCR_UME;
diff --git a/drivers/serial/serial_rockchip.c b/drivers/serial/serial_rockchip.c
index 6bac95a414ce..c06afc58f7ea 100644
--- a/drivers/serial/serial_rockchip.c
+++ b/drivers/serial/serial_rockchip.c
@@ -27,6 +27,7 @@ static int rockchip_serial_probe(struct udevice *dev)
plat->plat.base = plat->dtplat.reg[0];
plat->plat.reg_shift = plat->dtplat.reg_shift;
plat->plat.clock = plat->dtplat.clock_frequency;
+ plat->plat.fcr = UART_FCR_DEFVAL;
dev->platdata = &plat->plat;
return ns16550_serial_probe(dev);
diff --git a/include/ns16550.h b/include/ns16550.h
index 7c9703683109..5fcbcd2e74e3 100644
--- a/include/ns16550.h
+++ b/include/ns16550.h
@@ -121,6 +121,11 @@ typedef struct NS16550 *NS16550_t;
/* Ingenic JZ47xx specific UART-enable bit. */
#define UART_FCR_UME 0x10
+/* Clear & enable FIFOs */
+#define UART_FCR_DEFVAL (UART_FCR_FIFO_EN | \
+ UART_FCR_RXSR | \
+ UART_FCR_TXSR)
+
/*
* These are the definitions for the Modem Control Register
*/
--
2.17.0
Generated by GNU Enscript 1.6.5.90.