OpenWrt – Rev 1
?pathlinks?
#!/bin/sh
CFG=/etc/board.json
. /usr/share/libubox/jshn.sh
[ -s $CFG ] || /bin/board_detect || exit 1
[ -s /etc/config/network -a -s /etc/config/system ] && exit 0
generate_static_network() {
uci -q batch <<-EOF
delete network.loopback
set network.loopback='interface'
set network.loopback.ifname='lo'
set network.loopback.proto='static'
set network.loopback.ipaddr='127.0.0.1'
set network.loopback.netmask='255.0.0.0'
EOF
[ -e /proc/sys/net/ipv6 ] && {
uci -q batch <<-EOF
delete network.globals
set network.globals='globals'
set network.globals.ula_prefix='auto'
EOF
}
if json_is_a dsl object; then
json_select dsl
if json_is_a atmbridge object; then
json_select atmbridge
local vpi vci encaps payload nameprefix
json_get_vars vpi vci encaps payload nameprefix
uci -q batch <<-EOF
delete network.atm
set network.atm='atm-bridge'
set network.atm.vpi='$vpi'
set network.atm.vci='$vci'
set network.atm.encaps='$encaps'
set network.atm.payload='$payload'
set network.atm.nameprefix='$nameprefix'
EOF
json_select ..
fi
if json_is_a modem object; then
json_select modem
local type annex firmware tone xfer_mode
json_get_vars type annex firmware tone xfer_mode
uci -q batch <<-EOF
delete network.dsl
set network.dsl='dsl'
set network.dsl.annex='$annex'
set network.dsl.firmware='$firmware'
set network.dsl.tone='$tone'
set network.dsl.xfer_mode='$xfer_mode'
EOF
json_select ..
fi
json_select ..
fi
}
addr_offset=2
generate_network() {
local ifname macaddr protocol type ipaddr netmask
json_select network
json_select "$1"
json_get_vars ifname macaddr protocol ipaddr netmask
json_select ..
json_select ..
[ -n "$ifname" ] || return
# force bridge for multi-interface devices (and lan)
case "$1:$ifname" in
*\ * | lan:*) type="bridge" ;;
esac
uci -q batch <<-EOF
delete network.$1
set network.$1='interface'
set network.$1.type='$type'
set network.$1.ifname='$ifname'
set network.$1.proto='none'
EOF
[ -n "$macaddr" ] && uci -q batch <<-EOF
delete network.$1_dev
set network.$1_dev='device'
set network.$1_dev.name='$ifname'
set network.$1_dev.macaddr='$macaddr'
EOF
case "$protocol" in
static)
local ipad
case "$1" in
lan) ipad=${ipaddr:-"192.168.1.1"} ;;
*) ipad=${ipaddr:-"192.168.$((addr_offset++)).1"} ;;
esac
netm=${netmask:-"255.255.255.0"}
uci -q batch <<-EOF
set network.$1.proto='static'
set network.$1.ipaddr='$ipad'
set network.$1.netmask='$netm'
EOF
[ -e /proc/sys/net/ipv6 ] && uci set network.$1.ip6assign='60'
;;
dhcp)
# fixup IPv6 slave interface if parent is a bridge
[ "$type" = "bridge" ] && ifname="br-$1"
uci set network.$1.proto='dhcp'
[ -e /proc/sys/net/ipv6 ] && {
uci -q batch <<-EOF
delete network.${1}6
set network.${1}6='interface'
set network.${1}6.ifname='$ifname'
set network.${1}6.proto='dhcpv6'
EOF
}
;;
pppoe)
uci -q batch <<-EOF
set network.$1.proto='pppoe'
set network.$1.username='username'
set network.$1.password='password'
EOF
[ -e /proc/sys/net/ipv6 ] && {
uci -q batch <<-EOF
set network.$1.ipv6='1'
delete network.${1}6
set network.${1}6='interface'
set network.${1}6.ifname='@${1}'
set network.${1}6.proto='dhcpv6'
EOF
}
;;
esac
}
generate_switch_vlans_ports() {
local switch="$1"
local port ports role roles num attr val
#
# autogenerate vlans
#
if json_is_a roles array; then
json_get_keys roles roles
json_select roles
for role in $roles; do
json_select "$role"
json_get_vars ports
json_select ..
uci -q batch <<-EOF
add network switch_vlan
set network.@switch_vlan[-1].device='$switch'
set network.@switch_vlan[-1].vlan='$role'
set network.@switch_vlan[-1].ports='$ports'
EOF
done
json_select ..
fi
#
# write port specific settings
#
if json_is_a ports array; then
json_get_keys ports ports
json_select ports
for port in $ports; do
json_select "$port"
json_get_vars num
if json_is_a attr object; then
json_get_keys attr attr
json_select attr
uci -q batch <<-EOF
add network switch_port
set network.@switch_port[-1].device='$switch'
set network.@switch_port[-1].port=$num
EOF
for attr in $attr; do
json_get_var val "$attr"
uci -q set network.@switch_port[-1].$attr="$val"
done
json_select ..
fi
json_select ..
done
json_select ..
fi
}
generate_switch() {
local key="$1"
local vlans
json_select switch
json_select "$key"
json_get_vars enable reset blinkrate cpu_port
uci -q batch <<-EOF
add network switch
set network.@switch[-1].name='$key'
set network.@switch[-1].reset='$reset'
set network.@switch[-1].enable_vlan='$enable'
set network.@switch[-1].blinkrate='$blinkrate'
EOF
generate_switch_vlans_ports "$1"
json_select ..
json_select ..
}
generate_static_system() {
uci -q batch <<-EOF
delete system.@system[0]
add system system
set system.@system[-1].hostname='OpenWrt'
set system.@system[-1].timezone='UTC'
set system.@system[-1].ttylogin='0'
set system.@system[-1].log_size='64'
set system.@system[-1].urandom_seed='0'
delete system.ntp
set system.ntp='timeserver'
set system.ntp.enabled='1'
set system.ntp.enable_server='0'
add_list system.ntp.server='0.openwrt.pool.ntp.org'
add_list system.ntp.server='1.openwrt.pool.ntp.org'
add_list system.ntp.server='2.openwrt.pool.ntp.org'
add_list system.ntp.server='3.openwrt.pool.ntp.org'
EOF
if json_is_a system object; then
json_select system
local hostname
if json_get_var hostname hostname; then
uci -q set "system.@system[-1].hostname=$hostname"
fi
if json_is_a ntpserver array; then
local keys key
json_get_keys keys ntpserver
json_select ntpserver
uci -q delete "system.ntp.server"
for key in $keys; do
local server
if json_get_var server "$key"; then
uci -q add_list "system.ntp.server=$server"
fi
done
json_select ..
fi
json_select ..
fi
}
generate_rssimon() {
local key="$1"
local cfg="rssid_$key"
local refresh threshold
json_select rssimon
json_select "$key"
json_get_vars refresh threshold
json_select ..
json_select ..
uci -q batch <<-EOF
delete system.$cfg
set system.$cfg='rssid'
set system.$cfg.dev='$key'
set system.$cfg.refresh='$refresh'
set system.$cfg.threshold='$threshold'
EOF
}
generate_led() {
local key="$1"
local cfg="led_$key"
json_select led
json_select "$key"
json_get_vars name sysfs type trigger default
uci -q batch <<-EOF
delete system.$cfg
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='$trigger'
set system.$cfg.default='$default'
EOF
case "$type" in
gpio)
local gpio inverted
json_get_vars gpio inverted
uci -q batch <<-EOF
set system.$cfg.trigger='gpio'
set system.$cfg.gpio='$gpio'
set system.$cfg.inverted='$inverted'
EOF
;;
netdev)
local device mode
json_get_vars device mode
uci -q batch <<-EOF
set system.$cfg.trigger='netdev'
set system.$cfg.mode='$mode'
set system.$cfg.dev='$device'
EOF
;;
usb)
local device
json_get_vars device
uci -q batch <<-EOF
set system.$cfg.trigger='usbdev'
set system.$cfg.interval='50'
set system.$cfg.dev='$device'
EOF
;;
usbport)
local ports port
json_get_values ports ports
uci set system.$cfg.trigger='usbport'
for port in $ports; do
uci add_list system.$cfg.port=$port
done
;;
rssi)
local iface minq maxq offset factor
json_get_vars iface minq maxq offset factor
uci -q batch <<-EOF
set system.$cfg.trigger='rssi'
set system.$cfg.iface='rssid_$iface'
set system.$cfg.minq='$minq'
set system.$cfg.maxq='$maxq'
set system.$cfg.offset='$offset'
set system.$cfg.factor='$factor'
EOF
;;
switch)
local port_mask speed_mask mode
json_get_vars port_mask speed_mask mode
uci -q batch <<-EOF
set system.$cfg.port_mask='$port_mask'
set system.$cfg.speed_mask='$speed_mask'
set system.$cfg.mode='$mode'
EOF
;;
portstate)
local port_state
json_get_vars port_state
uci -q batch <<-EOF
set system.$cfg.port_state='$port_state'
EOF
;;
timer|oneshot)
local delayon delayoff
json_get_vars delayon delayoff
uci -q batch <<-EOF
set system.$cfg.trigger='$type'
set system.$cfg.delayon='$delayon'
set system.$cfg.delayoff='$delayoff'
EOF
;;
esac
json_select ..
json_select ..
}
generate_gpioswitch() {
local cfg="$1"
json_select gpioswitch
json_select "$cfg"
local name pin default
json_get_vars name pin default
uci -q batch <<-EOF
delete system.$cfg
set system.$cfg='gpio_switch'
set system.$cfg.name='$name'
set system.$cfg.gpio_pin='$pin'
set system.$cfg.value='$default'
EOF
json_select ..
json_select ..
}
json_init
json_load "$(cat ${CFG})"
if [ ! -s /etc/config/network ]; then
touch /etc/config/network
generate_static_network
json_get_keys keys network
for key in $keys; do generate_network $key; done
json_get_keys keys switch
for key in $keys; do generate_switch $key; done
fi
if [ ! -s /etc/config/system ]; then
touch /etc/config/system
generate_static_system
json_get_keys keys rssimon
for key in $keys; do generate_rssimon $key; done
json_get_keys keys gpioswitch
for key in $keys; do generate_gpioswitch $key; done
json_get_keys keys led
for key in $keys; do generate_led $key; done
fi
uci commit