OpenWrt – Rev 4

Subversion Repositories:
Rev:
#include "rt3050.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "unbranded,wr512-3gn", "ralink,rt3052-soc";

        gpio-leds {
                compatible = "gpio-leds";

                3g {
                        label = "wr512-3gn:green:3g";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };

                gateway {
                        label = "wr512-3gn:green:gateway";
                        gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };

                ap {
                        label = "wr512-3gn:green:ap";
                        gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };

                wps {
                        label = "wr512-3gn:green:wps";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };

                station {
                        label = "wr512-3gn:green:station";
                        gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };

        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;

                reset_wps {
                        label = "reset_wps";
                        gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };

                mode {
                        label = "mode";
                        gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_0>;
                };
        };
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
                        ralink,function = "gpio";
                };
        };
};

&esw {
        mediatek,portmap = <0x2f>;
};

&wmac {
        ralink,mtd-eeprom = <&factory 0>;
};

&otg {
        status = "okay";
};