OpenWrt – Rev 4

Subversion Repositories:
Rev:
/dts-v1/;

#include "rt5350.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "belkin,f7c027", "ralink,rt5350-soc";
        model = "Belkin F7C027";

        gpio-leds {
                compatible = "gpio-leds";

                status {
                        label = "f7c027:blue:status";
                        gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                };

                power {
                        label = "f7c027:blue:power";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };

                orange {
                        label = "f7c027:orange:status";
                        gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };

                relay {
                        label = "f7c027:device:relay";
                        gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
                };
        };

        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;

                top {
                        label = "restore";
                        gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };

                power {
                        label = "power";
                        gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RFKILL>;
                };

                sensor {
                        label = "sensor";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_0>;
                };
        };
};

&spi0 {
        status = "okay";

        m25p80@0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;

                partition@0 {
                        label = "u-boot";
                        reg = <0x0 0x30000>;
                        read-only;
                };

                partition@30000 {
                        label = "u-boot-env";
                        reg = <0x30000 0x10000>;
                        read-only;
                };

                factory: partition@40000 {
                        label = "factory";
                        reg = <0x40000 0x10000>;
                        read-only;
                };

                partition@50000 {
                        label = "firmware";
                        reg = <0x50000 0x770000>;
                };

                partition@7c0000 {
                        label = "firmware2";
                        reg = <0x7c0000 0x770000>;
                };

                partition@f30000 {
                        label = "belkin_settings";
                        reg = <0xf30000 0xa0000>;
                };

                partition@fd0000 {
                        label = "unknown";
                        reg = <0xfd0000 0x10000>;
                };

                partition@fe0000 {
                        label = "nvram";
                        reg = <0xfe0000 0x10000>;
                };

                partition@ff0000 {
                        label = "user_factory";
                        reg = <0xff0000 0x10000>;
                };
        };
};

&wmac {
        ralink,mtd-eeprom = <&factory 0>;
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "i2c", "jtag", "uartf";
                        ralink,function = "gpio";
                };
        };
};