OpenWrt – Rev 4

Subversion Repositories:
Rev:
/dts-v1/;

#include "rt5350.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "airlive,air3gii", "ralink,rt5350-soc";
        model = "AirLive Air3GII";

        gpio-leds {
                compatible = "gpio-leds";

                wlan {
                        label = "air3gii:green:wlan";
                        gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
                };

                mobile {
                        label = "air3gii:green:mobile";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
        };

        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;

                wps {
                        label = "wps";
                        gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };
};

&gpio0 {
        status = "okay";
};

&spi0 {
        status = "okay";

        m25p80@0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;

                partition@0 {
                        label = "u-boot";
                        reg = <0x0 0x30000>;
                        read-only;
                };

                partition@30000 {
                        label = "u-boot-env";
                        reg = <0x30000 0x10000>;
                        read-only;
                };

                factory: partition@40000 {
                        label = "factory";
                        reg = <0x40000 0x10000>;
                        read-only;
                };

                partition@50000 {
                        label = "firmware";
                        reg = <0x50000 0x3b0000>;
                };
        };
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "i2c", "jtag", "uartf";
                        ralink,function = "gpio";
                };
        };
};

&ethernet {
        mtd-mac-address = <&factory 0x4>;
};

&esw {
        mediatek,portmap = <0x2f>;
};

&wmac {
        ralink,mtd-eeprom = <&factory 0>;
};