OpenWrt – Rev 4
?pathlinks?
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -142,6 +142,74 @@ static struct board_info __initdata boar
},
},
};
+
+static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
+ { .offset = 96, .value = 0x2046 },
+ { .offset = 97, .value = 0xfe9d },
+ { .offset = 98, .value = 0x1854 },
+ { .offset = 99, .value = 0xfa59 },
+ { .offset = 112, .value = 0x2046 },
+ { .offset = 113, .value = 0xfe79 },
+ { .offset = 114, .value = 0x17f5 },
+ { .offset = 115, .value = 0xfa47 },
+ { .offset = 161, .value = 0x2222 },
+ { .offset = 162, .value = 0x2222 },
+ { .offset = 169, .value = 0x2222 },
+ { .offset = 170, .value = 0x2222 },
+ { .offset = 171, .value = 0x5555 },
+ { .offset = 172, .value = 0x5555 },
+ { .offset = 173, .value = 0x4444 },
+ { .offset = 174, .value = 0x4444 },
+ { .offset = 175, .value = 0x5555 },
+ { .offset = 176, .value = 0x5555 },
+};
+
+static struct board_info __initdata board_dsl_2751b_d1 = {
+ .name = "AW5200B",
+ .expected_cpu_id = 0x6318,
+
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+
+ .has_enetsw = 1,
+
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM43217,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ .board_fixups = dsl2751b_e1_fixups,
+ .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups),
+ },
+};
#endif /* CONFIG_BCM63XX_CPU_6318 */
/*
@@ -2039,6 +2107,7 @@ static const struct board_info __initcon
#ifdef CONFIG_BCM63XX_CPU_6318
&board_96318ref,
&board_96318ref_p300,
+ &board_dsl_2751b_d1,
#endif
#ifdef CONFIG_BCM63XX_CPU_6328
&board_96328avng,
@@ -2132,6 +2201,7 @@ static struct of_device_id const bcm963x
#ifdef CONFIG_BCM63XX_CPU_6318
{ .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
{ .compatible = "brcm,bcm96318ref_p300", .data = &board_96318ref_p300, },
+ { .compatible = "d-link,dsl-275xb-d", .data = &board_dsl_2751b_d1, },
#endif
#ifdef CONFIG_BCM63XX_CPU_6328
{ .compatible = "adb,a4001n", .data = &board_A4001N, },