OpenWrt – Rev 4
?pathlinks?
/*
* Wallys DR531 board support
*
* Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
*
* Based on mach-wpj531.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/pci.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "pci.h"
#define DR531_GPIO_BUZZER 4
#define DR531_GPIO_LED_WAN 11
#define DR531_GPIO_LED_LAN 14
#define DR531_GPIO_LED_SIG1 12
#define DR531_GPIO_LED_SIG2 16
#define DR531_GPIO_LED_SIG3 15
#define DR531_GPIO_LED_SIG4 13
#define DR531_GPIO_BTN_RESET 17
#define DR531_KEYS_POLL_INTERVAL 20 /* msecs */
#define DR531_KEYS_DEBOUNCE_INTERVAL (3 * DR531_KEYS_POLL_INTERVAL)
#define DR531_MAC0_OFFSET 0x0
#define DR531_MAC1_OFFSET 0x8
#define DR531_WMAC_CALDATA_OFFSET 0x1000
static struct gpio_led dr531_leds_gpio[] __initdata = {
{
.name = "dr531:green:wan",
.gpio = DR531_GPIO_LED_WAN,
.active_low = 1,
},
{
.name = "dr531:green:lan",
.gpio = DR531_GPIO_LED_LAN,
.active_low = 1,
},
{
.name = "dr531:green:sig1",
.gpio = DR531_GPIO_LED_SIG1,
.active_low = 1,
},
{
.name = "dr531:green:sig2",
.gpio = DR531_GPIO_LED_SIG2,
.active_low = 1,
},
{
.name = "dr531:green:sig3",
.gpio = DR531_GPIO_LED_SIG3,
.active_low = 1,
},
{
.name = "dr531:green:sig4",
.gpio = DR531_GPIO_LED_SIG4,
.active_low = 1,
},
{
.name = "dr531:buzzer",
.gpio = DR531_GPIO_BUZZER,
.active_low = 0,
}
};
static struct gpio_keys_button dr531_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = DR531_KEYS_DEBOUNCE_INTERVAL,
.gpio = DR531_GPIO_BTN_RESET,
.active_low = 1,
},
};
static void __init dr531_gpio_setup(void)
{
ath79_gpio_direction_select(DR531_GPIO_BUZZER, true);
ath79_gpio_direction_select(DR531_GPIO_LED_WAN, true);
ath79_gpio_direction_select(DR531_GPIO_LED_LAN, true);
ath79_gpio_direction_select(DR531_GPIO_LED_SIG1, true);
ath79_gpio_direction_select(DR531_GPIO_LED_SIG2, true);
ath79_gpio_direction_select(DR531_GPIO_LED_SIG3, true);
ath79_gpio_direction_select(DR531_GPIO_LED_SIG4, true);
ath79_gpio_output_select(DR531_GPIO_BUZZER, 0);
ath79_gpio_output_select(DR531_GPIO_LED_WAN, 0);
ath79_gpio_output_select(DR531_GPIO_LED_LAN, 0);
ath79_register_leds_gpio(-1, ARRAY_SIZE(dr531_leds_gpio),
dr531_leds_gpio);
ath79_register_gpio_keys_polled(-1, DR531_KEYS_POLL_INTERVAL,
ARRAY_SIZE(dr531_gpio_keys),
dr531_gpio_keys);
}
static void __init dr531_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
u8 *mac = (u8 *) KSEG1ADDR(0x1f03f810);
ath79_register_m25p80(NULL);
dr531_gpio_setup();
ath79_setup_ar933x_phy4_switch(false, false);
ath79_register_mdio(0, 0x0);
/* LAN */
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.speed = SPEED_100;
ath79_eth0_data.phy_mask = BIT(4);
ath79_init_mac(ath79_eth0_data.mac_addr, mac + DR531_MAC1_OFFSET, 0);
ath79_register_eth(0);
/* WAN */
ath79_switch_data.phy4_mii_en = 1;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_switch_data.phy_poll_mask |= BIT(4);
ath79_init_mac(ath79_eth1_data.mac_addr, mac + DR531_MAC0_OFFSET, 0);
ath79_register_eth(1);
ath79_register_wmac(art + DR531_WMAC_CALDATA_OFFSET, NULL);
ath79_register_pci();
ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_DR531, "DR531", "Wallys DR531", dr531_setup);