OpenWrt – Rev 3

?pathlinks?

Rev 2 – Blame – Compare with Previous – Last modification – View Log – Download

/dts-v1/;

#include "mt7620a.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "planex,mzk-ex750np", "ralink,mt7620a-soc";
        model = "Planex MZK-EX750NP";

        gpio-leds {
                compatible = "gpio-leds";

                power {
                        label = "mzk-ex750np:red:power";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };

                wifi {
                        label = "mzk-ex750np:red:wifi";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };

                wps {
                        label = "mzk-ex750np:green:wps";
                        gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
                };

                rep {
                        label = "mzk-ex750np:blue:rep";
                        gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
                };

                wifi1 {
                        label = "mzk-ex750np:blue:wifi1";
                        gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
                };

                wifi2 {
                        label = "mzk-ex750np:blue:wifi2";
                        gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
                };

                wifi3 {
                        label = "mzk-ex750np:blue:wifi3";
                        gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
                };
        };

        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;

                reset {
                        label = "reset";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };

                wps {
                        label = "wps";
                        gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
                        linux,code = <KEY_RFKILL>;
                };
        };
};

&gpio2 {
        status = "okay";
};

&gpio3 {
        status = "okay";
};

&spi0 {
        status = "okay";

        m25p80@0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;

                partition@0 {
                        label = "u-boot";
                        reg = <0x0 0x30000>;
                        read-only;
                };

                partition@30000 {
                        label = "u-boot-env";
                        reg = <0x30000 0x10000>;
                        read-only;
                };

                factory: partition@40000 {
                        label = "factory";
                        reg = <0x40000 0x10000>;
                        read-only;
                };

                partition@50000 {
                        label = "firmware";
                        reg = <0x50000 0x730000>;
                };

                partition@780000 {
                        label = "Udata";
                        reg = <0x780000 0x80000>;
                };
        };
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "uartf", "nd_sd", "rgmii2", "wled";
                        ralink,function = "gpio";
                };
        };
};

&ethernet {
        pinctrl-names = "default";
        pinctrl-0 = <&ephy_pins>;
        mtd-mac-address = <&factory 0x4>;
        mediatek,portmap = "llllw";
};

&wmac {
        ralink,mtd-eeprom = <&factory 0>;
};

&pcie {
        status = "okay";

        pcie-bridge {
                mt76@0,0 {
                        reg = <0x0000 0 0 0 0>;
                        device_type = "pci";
                        mediatek,mtd-eeprom = <&factory 0x8000>;
                };
        };
};