OpenWrt – Rev 3

?pathlinks?

Rev 2 – Blame – Compare with Previous – Last modification – View Log – Download

/dts-v1/;

#include "mt7628an.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "mercury,mac1200r-v2", "mediatek,mt7628an-soc";
        model = "Mercury MAC1200R v2";

        chosen {
                bootargs = "console=ttyS0,57600";
        };

        memory@0 {
                device_type = "memory";
                reg = <0x0 0x2000000>;
        };

        gpio-leds {
                compatible = "gpio-leds";
                status {
                        label = "mac1200rv2:green:status";
                        gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
        };
};

&spi0 {
        status = "okay";

        m25p80@0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0 0>;
                spi-max-frequency = <10000000>;
                m25p,chunked-io = <32>;

                partition@0 {
                        label = "u-boot";
                        reg = <0x0 0x1d800>;
                };

                factory: partition@0x1d800 {
                        label = "factory_info";
                        reg = <0x1d800 0x800>;
                        read-only;
                };

                art: partition@0x1e000 {
                        label = "art";
                        reg = <0x1e000 0x2000>;
                        read-only;
                };

                partition@20000 {
                        label = "config";
                        reg = <0x20000 0x10000>;
                };

                partition@30000 {
                        label = "u-boot2";
                        reg = <0x30000 0x10000>;
                };

                partition@40000 {
                        label = "firmware";
                        reg = <0x40000 0x7c0000>;
                };
        };
};

&ethernet {
        pinctrl-names = "default";
        mtd-mac-address = <&factory 0xd>;
        mediatek,portmap = "llllw";
};

&wmac {
        status = "okay";
        ralink,mtd-eeprom = <&art 0x0>;
};

&pcie {
        status = "okay";
        pcie-bridge {
                mt76@0,0 {
                        reg = <0x0000 0 0 0 0>;
                        device_type = "pci";
                        mediatek,mtd-eeprom = <&art 0x1000>;
                        ieee80211-freq-limit = <5000000 6000000>;
                };
        };
};