OpenWrt – Rev 3

?pathlinks?

Rev 2 – Blame – Compare with Previous – Last modification – View Log – Download

/dts-v1/;

#include "mt7628an.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "hiwifi,hc5661a", "mediatek,mt7628an-soc";
        model = "HiWiFi HC5661A";

        chosen {
                bootargs = "console=ttyS0,115200";
        };

        memory@0 {
                device_type = "memory";
                reg = <0x0 0x8000000>;
        };

        gpio-leds {
                compatible = "gpio-leds";

                system {
                        label = "hc5661a:blue:system";
                        gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
                };
                internet {
                        label = "hc5661a:blue:internet";
                        gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
                };
                wlan2g {
                        label = "hc5661a:blue:wlan2g";
                        gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
                };
        };

        gpio-keys {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;

                reset {
                        label = "reset";
                        gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "i2c", "refclk", "wled_an";
                        ralink,function = "gpio";
                };
        };
};

&spi0 {
        status = "okay";

        m25p80@0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                linux,modalias = "m25p80", "w25q128";
                spi-max-frequency = <10000000>;
                m25p,chunked-io = <32>;

                partition@0 {
                        label = "u-boot";
                        reg = <0x0 0x30000>;
                        read-only;
                };

                partition@30000 {
                        label = "hw_panic";
                        reg = <0x30000 0x10000>;
                        read-only;
                };

                factory: partition@40000 {
                        label = "factory";
                        reg = <0x40000 0x10000>;
                        read-only;
                };

                partition@50000 {
                        label = "firmware";
                        reg = <0x50000 0xf70000>;
                };

                partition@fc0000 {
                        label = "oem";
                        reg = <0xfc0000 0x20000>;
                        read-only;
                };

                bdinfo: partition@fe0000 {
                        label = "bdinfo";
                        reg = <0xfe0000 0x10000>;
                        read-only;
                };

                partition@ff0000 {
                        label = "backup";
                        reg = <0xff0000 0x10000>;
                        read-only;
                };
        };
};

&ethernet {
        mtd-mac-address = <&factory 0x4>;
        mediatek,portmap = "wllll";
};

&wmac {
        status = "okay";
};