OpenWrt – Rev 3

Subversion Repositories:
Rev:
/*
 * Device Tree file for the Linksys E1700
 *
 * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

/dts-v1/;

#include "mt7620a.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "linksys,e1700", "ralink,mt7620a-soc";
        model = "Linksys E1700";

        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;

                reset {
                        label = "reset";
                        gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
                        linux,code = <KEY_RESTART>;
                };

                wps {
                        label = "wps";
                        gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };

        gpio-leds {
                compatible = "gpio-leds";

                power {
                        label = "e1700:green:power";
                        gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
                };

                wan {
                        label = "e1700:green:wps";
                        gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
        };
};

&spi0 {
        status = "okay";

        m25p80@0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;

                partition@0 {
                        label = "u-boot";
                        reg = <0x0 0x30000>;
                        read-only;
                };

                partition@30000 {
                        label = "config";
                        reg = <0x30000 0x10000>;
                        read-only;
                };

                factory: partition@40000 {
                        label = "factory";
                        reg = <0x40000 0x10000>;
                        read-only;
                };

                partition@50000 {
                        label = "firmware";
                        reg = <0x50000 0x7b0000>;
                };
        };
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "i2c", "uartf";
                        ralink,function = "gpio";
                };
        };
};

&ethernet {
        status = "okay";
        mtd-mac-address = <&factory 0x28>;
        pinctrl-names = "default";
        pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;

        port@5 {
                status = "okay";
                mediatek,fixed-link = <1000 1 1 1>;
                phy-mode = "rgmii";
        };

        mdio-bus {
                status = "okay";

                phy0: ethernet-phy@0 {
                        reg = <0>;
                        phy-mode = "rgmii";
                };

                phy1: ethernet-phy@1 {
                        reg = <1>;
                        phy-mode = "rgmii";
                };

                phy2: ethernet-phy@2 {
                        reg = <2>;
                        phy-mode = "rgmii";
                };

                phy3: ethernet-phy@3 {
                        reg = <3>;
                        phy-mode = "rgmii";
                };

                phy4: ethernet-phy@4 {
                        reg = <4>;
                        phy-mode = "rgmii";
                };

                phy1f: ethernet-phy@1f {
                        reg = <0x1f>;
                        phy-mode = "rgmii";
                };
        };
};

&gsw {
        mediatek,port4 = "gmac";
        mediatek,mt7530 = <1>;
};

&wmac {
        ralink,mtd-eeprom = <&factory 0>;
};