OpenWrt – Rev 3

?pathlinks?

Rev 2 – Blame – Compare with Previous – Last modification – View Log – Download

/dts-v1/;

#include "rt5350.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "dlink,dir-610-a1", "ralink,rt5350-soc";
        model = "D-Link DIR-610 A1";

        gpio-leds {
                compatible = "gpio-leds";

                status {
                        label = "dir-610-a1:green:status";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };

                wps {
                        label = "dir-610-a1:green:wps";
                        gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };

        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;

                reset {
                        label = "reset";
                        gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };

                wps {
                        label = "wps";
                        gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };
};

&spi0 {
        status = "okay";

        m25p80@0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;

                partition@0 {
                        label = "u-boot";
                        reg = <0x0 0x30000>;
                        read-only;
                };

                devdata: partition@30000 {
                        label = "devdata";
                        reg = <0x30000 0x10000>;
                        read-only;
                };

                factory: partition@40000 {
                        label = "factory";
                        reg = <0x40000 0x10000>;
                        read-only;
                };

                partition@50000 {
                        label = "firmware";
                        reg = <0x50000 0x3b0000>;
                };
        };
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "i2c", "jtag", "uartf";
                        ralink,function = "gpio";
                };
        };
};

&ethernet {
        mtd-mac-address = <&devdata 0x4004>;
};

&esw {
        status = "okay";
        mediatek,portmap = <0x2f>;
        mediatek,led_polarity = <0x17>;
};

&wmac {
        status = "okay";
        ralink,led-polarity = <1>;
        ralink,mtd-eeprom = <&devdata 0x4000>;
};