OpenWrt – Rev 3

?pathlinks?

Rev 2 – Blame – Compare with Previous – Last modification – View Log – Download

/dts-v1/;

#include "bcm6368.dtsi"

#include <dt-bindings/input/input.h>

/ {
        model = "Observa VH4032N";
        compatible = "observa,vh4032n", "brcm,bcm6368";

        chosen {
                bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
                stdout-path = "serial0:115200n8";
        };

        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
                debounce-interval = <60>;

                reset {
                        label = "reset";
                        gpios = <&pinctrl 34 1>;
                        linux,code = <KEY_RESTART>;
                };
                wps {
                        label = "wps";
                        gpios = <&pinctrl 35 1>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };

        gpio-leds {
                compatible = "gpio-leds";

                dsl_blue {
                        label = "VH4032N:blue:dsl";
                        gpios = <&pinctrl 2 1>;
                };
                dsl_red {
                        label = "VH4032N:red:dsl";
                        gpios = <&pinctrl 5 1>;
                };
                hspa_blue {
                        label = "VH4032N:blue:hspa";
                        gpios = <&pinctrl 11 1>;
                };
                hspa_red {
                        label = "VH4032N:red:hspa";
                        gpios = <&pinctrl 12 1>;
                };
                power_blue {
                        label = "VH4032N:blue:power";
                        gpios = <&pinctrl 22 0>;
                };
                power_red {
                        label = "VH4032N:red:power";
                        gpios = <&pinctrl 24 0>;
                        default-state = "on";
                };
                voice_blue {
                        label = "VH4032N:blue:voice";
                        gpios = <&pinctrl 25 1>;
                };
                voice_red {
                        label = "VH4032N:red:voice";
                        gpios = <&pinctrl 26 1>;
                };
        };
};

&pinctrl {
        usb_hub_reset {
                gpio-hog;
                gpios = <27 0>;
                output-high;
                line-name = "usb-hub-reset-gpio";
        };
};

&pflash {
        status = "ok";

        linux,part-probe = "bcm63xxpart";

        partitions {
                compatible = "fixed-partitions";
                #address-cells = <1>;
                #size-cells = <1>;

                cfe@0 {
                        label = "CFE";
                        reg = <0x0000000 0x0020000>;
                        read-only;
                };

                linux@20000 {
                        label = "linux";
                        reg = <0x0020000 0x1fc0000>;
                        compatible = "brcm,bcm963xx-imagetag";
                };

                nvram@1fe0000 {
                        label = "nvram";
                        reg = <0x1fe0000 0x020000>;
                };
        };
};

&uart0 {
        status = "ok";
};