OpenWrt – Rev 3

?pathlinks?

Rev 2 – Blame – Compare with Previous – Last modification – View Log – Download

/dts-v1/;

#include "bcm6362.dtsi"

#include <dt-bindings/input/input.h>

/ {
        model = "SFR neufbox 6 (Sercomm)";
        compatible = "sfr,nb6-ser-r0", "brcm,bcm6362";

        chosen {
                bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
                stdout-path = "serial0:115200n8";
        };

        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
                debounce-interval = <60>;

                service {
                        label = "service";
                        gpios = <&pinctrl 10 1>;
                        linux,code = <BTN_0>;
                };
                wlan {
                        label = "wlan";
                        gpios = <&pinctrl 12 1>;
                        linux,code = <KEY_WLAN>;
                };
                reset {
                        label = "reset";
                        gpios = <&pinctrl 24 1>;
                        linux,code = <KEY_RESTART>;
                };
                wps {
                        label = "wps";
                        gpios = <&pinctrl 25 1>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };

        switch {
                compatible = "realtek,rtl8367";
                gpio-sda = <&pinctrl 18 0>;
                gpio-sck = <&pinctrl 20 0>;

                realtek,extif0 = <1 5 1 1 1 1 1 1 2>;
        };
};

&hsspi {
        status = "ok";

        flash@0 {
                compatible = "jedec,spi-nor";
                spi-max-frequency = <20000000>;
                spi-tx-bus-width = <2>;
                spi-rx-bus-width = <2>;
                reg = <0>;

                #address-cells = <1>;
                #size-cells = <1>;

                linux,part-probe = "bcm63xxpart";

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        cfe@0 {
                                reg = <0x000000 0x010000>;
                                label = "cfe";
                                read-only;
                        };

                        linux@10000 {
                                reg = <0x010000 0xfe0000>;
                                label = "linux";
                                compatible = "brcm,bcm963xx-imagetag";
                        };

                        nvram@ff0000 {
                                reg = <0xff0000 0x010000>;
                                label = "nvram";
                        };
                };
        };
};

&uart0 {
        status = "ok";
};