OpenWrt – Rev 3

?pathlinks?

Rev 2 – Blame – Compare with Previous – Last modification – View Log – Download

/dts-v1/;

#include "bcm6368.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        model = "ADB P.DG AV4202N";
        compatible = "adb,av4202n", "brcm,bcm6368";

        chosen {
                bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
                stdout-path = "serial0:115200n8";
        };

        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
                debounce-interval = <60>;

                reset {
                        label = "reset";
                        gpios = <&pinctrl 34 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
                wlan {
                        label = "wlan";
                        gpios = <&pinctrl 37 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WLAN>;
                };
        };

        gpio-leds {
                compatible = "gpio-leds";

                power_white {
                        label = "AV4202N:white:power";
                        gpios = <&pinctrl 10 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
                power_red {
                        label = "AV4202N:red:power";
                        gpios = <&pinctrl 11 GPIO_ACTIVE_LOW>;
                };
                wan_white {
                        label = "AV4202N:white:wan";
                        gpios = <&pinctrl 26 GPIO_ACTIVE_LOW>;
                };
                wan_red {
                        label = "AV4202N:red:wan";
                        gpios = <&pinctrl 27 GPIO_ACTIVE_LOW>;
                };
                phone_white {
                        label = "AV4202N:white:phone";
                        gpios = <&pinctrl 24 GPIO_ACTIVE_LOW>;
                };
                phone_red {
                        label = "AV4202N:red:phone";
                        gpios = <&pinctrl 25 GPIO_ACTIVE_LOW>;
                };
                wifi {
                        label = "AV4202N:blue:wifi";
                        gpios = <&pinctrl 22 GPIO_ACTIVE_LOW>;
                };
        };
};

&pflash {
        status = "ok";

        linux,part-probe = "bcm63xxpart";

        partitions {
                compatible = "fixed-partitions";
                #address-cells = <1>;
                #size-cells = <1>;

                cfe@0 {
                        label = "CFE";
                        reg = <0x000000 0x020000>;
                        read-only;
                };

                linux@20000 {
                        label = "linux";
                        reg = <0x020000 0xfc0000>;
                        compatible = "brcm,bcm963xx-imagetag";
                };

                nvram@fe0000 {
                        label = "nvram";
                        reg = <0xfe0000 0x020000>;
                };
        };
};

&uart0 {
        status = "ok";
};